Ryu controller ospf jobs

I need a Word document structured by these chapters: (automotive industry + security incidents) communication protocols 3.Controller Area Network Interconnect Network in automotive part *it's optional this chapter but I could really use it if I had it * Each piece of information put in the word should include the link or name of the book from which it was taken. The information should be a maximum of 50-60 pages.

...activities are performed in the edge device. The orchestrator can push the microservices in docker/container carriers for configuring the device as per the requirements. These devices can be a branch office, a remote data center, or a cloud platform. SD-WAN Orchestrator– It is a virtualized manager for the network on the control plane and applies the protocols and policies on the traffic. SD-WAN Controller – It centralizes management, enabling operators to see the full network in a single platform, and sets policy for the orchestrator to execute. ...

Write a C++ and Python software run on Raspberry Pi to receive sensor signal and to control a embedded module.

...src/XF/Db/Mysqli/ at line 79 XFDbMysqliStatement->execute() in src/XF/Db/ at line 96 XFDbAbstractAdapter->query() in src/XF/Install/ at line 231 XFInstallUpgradeAbstractUpgrade->executeUpgradeQuery() in src/XF/Install/Upgrade/ at line 15 XFInstallUpgradeVersion1000051->step1() in src/XF/Install/Controller/ at line 179 XFInstallControllerUpgrade->actionRun() in src/XF/Mvc/ at line 352 XFMvcDispatcher->dispatchClass() in src/XF/Mvc/ at line 263 XFMvcDispatcher->dispatchFromMatch() in src/XF/Mvc/ at line 115 XFMvcDispatcher->dispatchLoop() in src/XF/Mvc/ at line 57 XFMvcDispatcher->run() in src/XF/ at line 2352 XFApp->run() in src/XF

I have an NPC in my project that works with an AI Controller and Behavior Tree. You will need to add the NPC from the free Epic Games project "LYRA" to my project. You will need to make the AI Controller and Behavior Tree of the new NPC similar to that of the existing NPC, namely using VisAI. Also, from LYRA, you need to take the logic of the NPC weapons. No need to take character or weapon textures, as we have our own. Nothing for multiplayer needs to be taken over.

We have 2 s...there are static IPs. Concrete work: -> Setting up 2 tunnels over the respective Internet lines -> Distribution of the traffic to the 2 lines. Individual connections must only be allowed to go over one line at a time. (Mangle? per-Connection-Classifier?) -> It must be possible to determine the ratio of the distribution to the 2 lines. -> The same setup of the tunnels on the other side -> Existing OSPF must work, because this traffic should be load balanced. Possibly a bridge interface in front of it? We are open for ideas here ;) We tried to build it with Mangle-Rules but it didn't work out that way. If someone has done something like this before and has experience with it, it should probably be easy. Router location 1 : Mikrotik CCR1016 Router...

We have an arduino uno micro controller with a H bridge shield driving a solenoid. I need the core of the solenoid to oscillate at a fast rate in and out, unfortunately my coding experience is fairly limited so I have hit a stumbling block. We have the armature of the solenoid oscillating but require the ability to vary the rate thru small changes in the code. Is this possible ?

...src/XF/Db/Mysqli/ at line 79 XFDbMysqliStatement->execute() in src/XF/Db/ at line 96 XFDbAbstractAdapter->query() in src/XF/Install/ at line 231 XFInstallUpgradeAbstractUpgrade->executeUpgradeQuery() in src/XF/Install/Upgrade/ at line 15 XFInstallUpgradeVersion1000051->step1() in src/XF/Install/Controller/ at line 179 XFInstallControllerUpgrade->actionRun() in src/XF/Mvc/ at line 352 XFMvcDispatcher->dispatchClass() in src/XF/Mvc/ at line 259 XFMvcDispatcher->dispatchFromMatch() in src/XF/Mvc/ at line 115 XFMvcDispatcher->dispatchLoop() in src/XF/Mvc/ at line 57 XFMvcDispatcher->run() in src/XF/ at line 2352 XFApp->run() in src/XF

...src/XF/Db/Mysqli/ at line 79 XFDbMysqliStatement->execute() in src/XF/Db/ at line 96 XFDbAbstractAdapter->query() in src/XF/Install/ at line 231 XFInstallUpgradeAbstractUpgrade->executeUpgradeQuery() in src/XF/Install/Upgrade/ at line 15 XFInstallUpgradeVersion1000051->step1() in src/XF/Install/Controller/ at line 179 XFInstallControllerUpgrade->actionRun() in src/XF/Mvc/ at line 352 XFMvcDispatcher->dispatchClass() in src/XF/Mvc/ at line 263 XFMvcDispatcher->dispatchFromMatch() in src/XF/Mvc/ at line 115 XFMvcDispatcher->dispatchLoop() in src/XF/Mvc/ at line 57 XFMvcDispatcher->run() in src/XF/ at line 2352 XFApp->run() in src/XF

...(1 - 2 pages) Show analysis and determine areas of RMM Staffing and time budget (1/2 - 1 page) Demonstrate how you would allocate your audit staff and the client’s staff, consider using a chart. Organize by audit activity and risk areas being audited, include expected hours to complete activity and staff member (Ie. Junior Audit, Senior Audit, Audit Supervisor, Audit Manager, Partner, CFO, Controller, AP Clerk etc.) RAMP Risk assessment (2-4 pages) Assess risks (chapter 5 and 6), provide a conclusion (H,M,L and percentage) Identify primary risk areas base on your assessment Approach (1/2 to 1 page) Identify factors that influence audit approach and determine overall approach for the audit Materiality (1/2 to 1 page) Write overall materiality section for the audit p...

Hello again! after recent update of Prestashop to Version 1.7.8.6 I see that some little ICONS gone missing in the shop's front-end: The Search-Window is displayed incorrectly. Need some help finetuning those 2 problems

Hello, my name is Adam, i am looking to create an online buisness in where i would like to produce my own product, i require an artist that can create some sort of prototype to put to Chinese manufactorors , attached will be two annotated photos, of the type of specification and joystick that i would like to be produced, if you are not familiar with the online gaming world and joysticks that are used for flight simulators or any simulation game where a gamestick can be used, please refer to the two photos, i require a 12 buttoned joystick, two sliders on the left hand side, a slider on the bottom as referenced on the photos, a HAT switch which is located in the middle, a trigger button which is located on the front of the joystick, attached will be a third photo of a trigger button and an ...

...Multiplayer, audio, and text connection options. Voices differ depending on the distance. sample game link 1: We will use the below modules from the Unity store: 1. Unity Bolt: 2. Locomotion : 3. enemy 1: 4. enemy 2: 5. Water: 6. player example: 7. open world: https://assetstore

We are looking for Native Android app developer who can develop an Application to restrict phone functionality using Google device lock controller

...fully working by using Cisco Packet Tracer software. Section B: Recommendation to upgrade the network 1. Based on your findings in Section A, your team has recommended the organization to upgrade their network settings & configuration without changing their current design. Your suggestion should include these areas: a. Public and Private IP with DHCP implementation. b. Ether Channel c. EIGRP or OSPF Protocols d. VLAN (Virtual LAN) e. HSRP (Hot Standby Routing Procotol) f. IP Summarisation g. CHAP or PAP Router Authentication h. ACL (Access Control List) i. NAT or PAT j. Ipv4 and ipv6 k. STP (Spanning Tree Protocol) * Provide your own assumptions on the departments, number of PCs, IP address used, etc. whichever required supporting your recommendation. The assumptions must be ...

Ive tried and tried to get this racing drone to connect to my controller im not sure if i need a different receiver or whats going on

Ive tried and tried to get this racing drone to connect to my controller im not sure if i need a different receiver or whats going on

Controller with the following features to supply power to a titanium sealing band. 1. Variable control the temperature of the band by measuring the resistance of the band (estimated 100 C to 200 C) 2. Variable control of the time that power is applied (Estimated 100 ms – 1 sec) 3. Automatic calibration of resistance vs temperature with the installation of a new band 4. Pre-heat of the band between sealing cycles (Est 65C) 5. Alarm indication of band failure 6. Display of set values 7. Input voltage: 120 V or 220 V 8. Sealing voltage: 24 V or 48V (2 output taps on external transformer) 9. Cycles per minute: Up to 100 10. UL – to be determined

Hello, We currently have a live Umbraco 9 website hosted on Umbraco Cloud. The website has a blog, case study and vacancy document types. We’re looking for someone to develop three GET API controllers that...hosted on Umbraco Cloud. The website has a blog, case study and vacancy document types. We’re looking for someone to develop three GET API controllers that return the content for each document type formatted as JSON. We want to be able to access the JSON data for the live blogs, case studies and vacancies via three endpoints. We want the API to be publicly accessible via the default Umbraco API controller URL: /Umbraco/Api/**, but happy for this also to be routed to different URL structure if can be explained to us. Please let me know if you can do this for us or ...

Hello Santhosh, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include Series SMPS DC-DC Converter, BLDC Motor Controller, and Li-ion Smart Battery Charger. Is this something you are interested in discussing further?

Hello Sujoy0, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include Series SMPS DC-DC Converter, BLDC Motor Controller, Li-ion Smart Battery Charger, and BMS. Is this something you are interested in discussing further?

Hello Avi, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include BLDC Motor Controller, Series SMPS DC-DC Converter, and IoT Vehicle Monitor Box for EVs. Is this something you are interested in discussing further?

Hello Deepak, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include BLDC Motor Controller and Series SMPS DC-DC Converter. Is this something you are interested in discussing further?

Hello Sagar, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Vadodara. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include BLDC Motor Controller and Series SMPS DC-DC Converter for EVs. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. I am tamizh but now based in Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller, Series SMPS DC-DC Converter, BMS, and Li-ion battery charger. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded freelance engineer with experience. Projects include BLDC Motor Controller and IoT Vehicle Monitor Box for EVs. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded engineer with experience. Projects include BLDC Motor Controller and DC-DC Converter series regulator SMPS. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller and IoT Vehicle Monitor Box. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please DON'T accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Vadodara. And have a need for a talented electronics/embedded freelance engineer for BLDC Motor Controller and DC-DC Converter. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please don't accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience for CANBus enabled BLDC Motor Controller. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please don't accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Vadodara. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller and IoT Vehicle Monitor Box. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please don't accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Vadodara, Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller and IoT Vehicle Monitor Box. Is this something you are interested in discussing further?

Convert PHP system to a windows desktop system and install dependencies in the installation process. Dependencies to be installed: #PHP PHP Version 7.3.4 extension=curl extension=imap extension=mbstring extension=mysqli extension=openssl extension=pdo_mysql max_execution_time = 0 max_input_time = 5000 memory_limit = ...installation process. Dependencies to be installed: #PHP PHP Version 7.3.4 extension=curl extension=imap extension=mbstring extension=mysqli extension=openssl extension=pdo_mysql max_execution_time = 0 max_input_time = 5000 memory_limit = 512M #Python python3.9 python requests python BeautifulSoup4 python htmldom python lxml The desktop system should have a button that allows the user to call a controller function on click and the system will start executing tha...

Hello, I am contacting you for several automotive (EV) electronics projects. First, please don't accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller, BMS, Battery Charger, DC DC Converter, and IoT Vehicle Monitor Box. Is this something you are interested in discussing further?

Hello, I am contacting you for several automotive (EV) electronics projects. First, please don't accept this project. It is just a way to get in touch with you, since there was no other way to contact. We are based in Vadodara, Gujarat. And have a need for a talented electronics/embedded engineer with automotive experience. Projects include BLDC Motor Controller, BMS, Battery Charger, DC DC Converter, and IoT Vehicle Monitor Box. Is this something you are interested in discussing further?

Add a new modal page with button click to display result from a exist controller passing id Pass session value to database with existing code using vbhtml, mvc, asp.net 4.6.1, razor, jquery, ajax, vb.net

I need help with...project. I want to include this LED strip effect () in this project as an effect mode: There is also a small error in the project. I can switch effects with a push button. With a longer click of about 2 seconds, the controller goes into sleep mode. but if i hold the button longer than 3 seconds, the controller crashes. This should be fixed too. I use an Arduino Nano for this project. LED-Data Pin: D12 Push Pin: D2 LED strip type: WS2812 LED count: 28 The price is fix. I don´t pay more or outside of freelancer. I only pay after i tested it on my hardware and if it works fine. Just write me, if you agree with this! Best Regards Phil

Actually we have to develop a website Need to use codeigniter framework and xamp Mysql php,MVC (Model view controller) Please apply if you have the required expertise.

Hi Kartik S., I noticed your profile and wanted to discuss a project. We are based in Vadodara so not far away. You have excellent reviews here - kudos! First, please don't accept this project since it is not defined. I wanted to contact you and there doesn't seem to be any other way. Have you experience designing a BLDC Motor Controller / Driver up to 1500W? Or do you only design the Motors themselves? Thanks, Vish

Hi Hari M., I noticed your profile and would like to see if you are suitable for automotive project. Have you any experience with any of the following -> DC-DC Converter, Battery Management System "BMS", BLDC Motor Controller, IoT Vehicle Monitor / Telematics Box, or Smart Li-Ion Battery Charger. Knowledge or experience of CANBus protocol for automotive is excellent. Ignore this budget number of Rs. 600 since still don't know where you can help us. So let us discuss first.

...Wellington,and Auckland If you thrive on taking a customer centric based approach and have break/fix/repair skills for notebooks/laptops and printers, then we want to hear from you We are looking for Hardware Repair candidates in Delhi! Duties and Responsibilities Replace/Repair - System board , Display assembly, Webcam , Speaker, Fan, Bezel, Heatsink ,Touchpad , Specific Keyboard ,HDD ,Top cover, Controller board ,PCB,I/O board. Some responsibilities may include but are not limited to: - Run diagnostics tests to understand why the Operating System (OS) is not responding to system error 90B - Travel to customer sites, investigate customer complaints, and resolve problems - Perform preventative maintenance and repair services on equipment by analyzing system problems, troubles...

...Temerloh, and Sepang If you thrive on taking a customer centric based approach and have break/fix/repair skills for notebooks/laptops and printers, then we want to hear from you We are looking for Hardware Repair candidates in Delhi! Duties and Responsibilities Replace/Repair - System board , Display assembly, Webcam , Speaker, Fan, Bezel, Heatsink ,Touchpad , Specific Keyboard ,HDD ,Top cover, Controller board ,PCB,I/O board. Some responsibilities may include but are not limited to: - Run diagnostics tests to understand why the Operating System (OS) is not responding to system error 90B - Travel to customer sites, investigate customer complaints, and resolve problems - Perform preventative maintenance and repair services on equipment by analyzing system problems, troubleshoo...

...Bendigo and Warragul If you thrive on taking a customer centric based approach and have break/fix/repair skills for notebooks/laptops and printers, then we want to hear from you We are looking for Hardware Repair candidates in Delhi! Duties and Responsibilities Replace/Repair - System board , Display assembly, Webcam , Speaker, Fan, Bezel, Heatsink ,Touchpad , Specific Keyboard ,HDD ,Top cover, Controller board ,PCB,I/O board. Some responsibilities may include but are not limited to: - Run diagnostics tests to understand why the Operating System (OS) is not responding to system error 90B - Travel to customer sites, investigate customer complaints, and resolve problems - Perform preventative maintenance and repair services on equipment by analyzing system problems, troubleshoo...

...Kolkata and Ahmedabad If you thrive on taking a customer centric based approach and have break/fix/repair skills for notebooks/laptops and printers, then we want to hear from you We are looking for Hardware Repair candidates in Delhi! Duties and Responsibilities Replace/Repair - System board , Display assembly, Webcam , Speaker, Fan, Bezel, Heatsink ,Touchpad , Specific Keyboard ,HDD ,Top cover, Controller board ,PCB,I/O board. Some responsibilities may include but are not limited to: - Run diagnostics tests to understand why the Operating System (OS) is not responding to system error 90B - Travel to customer sites, investigate customer complaints, and resolve problems - Perform preventative maintenance and repair services on equipment by analyzing system problems, troublesh...

We are planning a controller board based on nRF52840 and IOT communication module. We need developer that will come up with hardware requirements for programming (FW and programming over the air) and after that program interaction between nRF52840 and several serial, I2c modules, LED control and sending data over IOT

Set up a cloud access server to join over 3 branch offices, domain controller, RADIUS, file share, monitoring, backup

I am looking for expert engineers. Who have previous experience in Flight controller design. The specs of the F7 Flight controller 1. Support beta flight, inav, clean flight. 2. Contains all the sensors, imu, gyro, bmp, osd 3. Black box 32mb. 4. It should also support ardupilot 4.00 and above

I am looking to develop a F7 based flight controller. 1. It should support Beta flight, inav, clean flight. 2. Should have imu, bmp280, osd. 32mb black box The developer has to support the testing of Flight controller using beta flight. 3. This flight controller should also support ardupilot 4:00 version and above.

Hi Stephan L., I noticed your profile and would like to offer you my project. We can discuss any details over chat. It's a water metering project with a LoRaWAN valve controller. Let me know if you are interested.

Hi Hemant Liladhar R., I noticed your profile and would like to offer you my project. We can discuss any details over chat. It's a water metering project with a LoRaWAN valve controller. Let me know if you are interested.