Avr brush dc motor controller jobs

I am looking for an experienced PCB layout designer to create a 4-layer multi-layer PCB layout using Easy EDA (Std Edition). Key Requirements: - Must have knowledge of motor drive electronics for high current 3 phase BLDC and good understanding or recirculating currents. - Expertise in Easy EDA (Std Edition) and knowledge of its features and capabilities - Strong understanding of multi-layer PCB layout design principles and best practices - Ability to optimize component placement and routing for maximum performance and reliability - Familiarity with signal integrity, power integrity, and EMI/EMC considerations - Proficiency in interpreting and implementing design specifications and requirements - Attention to detail and ability to meet project deadlines PCB size is fixed and cann...

I've purchased an inexpensive DC power regulating board, 12 V in and 0-12 V out. It has a pot you adjust for the output voltage. I want the output to slowly build from 0 to 12 volts over about 10 to 20 seconds. I decided to swap in a slow RC circuit for the pot. It does NOT work. See attached pic. I think the pot is just a variable resistor as the wiper and ground leg of the pot are connected. The board was purchased on ebay: XH-M400 for about $8. I think you would have to purchase a board and experiment with it. The result should be when you put 12 VDC to the board, the output should slowly build to 12 VDC over a 10 to 20 second time period. It does not have to be linear. I would expect it to somewhat follow the characteristics of an RC filter.

I am looking for an expert in the analysis of three phase induction coil motors using Ansys Maxwell. The specific parameter that needs to be analyzed is the magnetic field distribution. Skills and Experience: - Strong proficiency in Ansys Maxwell - In-depth knowledge of three phase induction coil motors - Experience in analyzing and interpreting magnetic field distribution data - Ability to work with high accuracy and precision The analysis needs to be completed within a timeframe of 1-2 weeks.

I am looking for assistance with medical insurance credentialing for my physicians. Specifically, I need help with provider enrollment. I am one provider needing credentialing under a group practice. I am licensed in all states wanting to enroll in major companies in all states and DC including medicare. so it's about 5-6 applications per state. It is all remote medicine so I'm not sure if every state needs an application or only the state that I reside/provide services from. I need a flat rate, and someone who is professional and experienced in the matter. per application rates won't be considered. Budget is around 750-1300

I am looking for a skilled Android / IOS ...application designer to create an application that focuses on content presentation on a TV screen or a projector and it should be able to control a certain presentation from a computer if needed and control a stepper motor controlled by Arduino. The main purpose of the application is to provide an interactive and entertaining experience for general users. The Design should be Customizable so we can add certain content to it or change it depending on the project Skills and Experience: - Proficiency in Android application design and development - Experience with Arduino and stepper motor control - Strong understanding of content presentation and user interface design - Ability to create a seamless user experience across both phone...

We are looking to replace a Graphics LCD display with 320x200 pixel resolution using a SED1330/1335 Controller with a modern TFT or OLED based solution with 400x300 pixel resolution . The scope of the project will be to suggest a low power ,MCU suitable for this task or a FPGA/CPLD based solution , develop and debug the code to convert the data from the SED1330 commands to serial commands the new display can process and scale the data to fit the higher screen resolution . All hardware design will be performed by us

I am interested in hiring a professional to consult on my electric motor project. Specifically, I would like them to review and analyze new technology and determine how revolutionary it is. The outcome I am seeking is to learn more about the new technology and is it valuable. The consulting engagement should not last longer than a week.

**************NOT FOR BEGINNERS********* I am looking for experienced person who can do the PCB design . The bids are for 4 types of boards which will have use 1) ESP32-S3 chipset (Multilayer Board) 2) ESP32-S3 Module (2 layer) 3) ESP32 -S3 chipset based board with onboard MOSFET'S for motor control (Multilayer Board) 4)AT32 based board (Multilayer) The freelancer should have adequate knowledge on multilayer PCB design, Basic components and should know about the MOSFET'S and impedance matching as well. EasyEda is preferable,but the freelancer can use whatever the software they are familiar with. Other software will take time to verify the design. Please note that an "sample board" which has issues in routing/schematic will be given to the freelancer to ch...

The simulation of a PMS (Permanent Magnet Synchronous) motor for an existing design using Ansys Electronic involves utilizing Ansys software to model and analyze the motor's electromagnetic performance.

I am looking for a freelancer who specializes in digital circuits and can assist me with designing a circuit from the ground up. The project requires expertise in software programming and It just needs to be ...requires expertise in software programming and It just needs to be an effective circuit, and parts list. You need not design PCB etc. Just use an off the shelf waveform generator and couple to the power circuit. Its mainly about the output circuit that will provide the power required with the control (voltage) and out capability (up to 100A/phase) It is to drive a high power linear synchronous motor prototype.. The ideal candidate should have a strong background in electronics, electromagnetism, and circuit design. i need someone who is ready and can start asap , to be urg...

We are looking for a system that does the following: - User fills out a form on our website to order internet service and sends us payment as part of the form. -- The form has the following fields: 1. First Name 2. Last Name 3. Business Name 4. Phone Number 5. E-Mail 6. WiFi Service Start Date 7. WiFi Service End Date (user ...they selected. - Once the end date comes, the user account should be deleted and the VLAN should then be added back to the list of available VLANS for new user signups. We would like the ability to see a portal with all VLANS and the available VLANS left in the pool, along with all of the usernames and passwords generated by the form entries. Please configure the RADIUS server in the UniFi Controller once completed. Please let me know if you have any q...

#1. I Need the A&B contractor logo on the card to be re-created identically as it is on the card. JUST the LOGO including the Hammer and Brush and EST. 1996 Please try to use a font as close as possible to the original #2 for the 2nd picture just create the Hammer and Brush - Not the phone number and email address. I need these files in .SVG .AI and .JPG files (Please ensure everything is spelled correctly)

14 cell Li-Ion on 6U Eurocard 160x233.35mm with 1x 90 degree DIN41612 96pin Type C and 1x 90 degree DIN41612 32 pin Type F, DC/DC and socket for Arduino Nano ver 3.x You must do the needed updates to the schematic, and make the PCB, gerber files and BOM. I will send you some files on the sockets, DC/DC and Arduino nano Socket. There miht also be a 6U Eurocard on the net that you can use as template. The complete job should be done within 10 hour time. f above the Freelancer will bear the cost

Hello, I'm looking for an experienced Java programmer to take on a project for arch insurance. This project is for an existing business and the specific functionalities needed are writing test cases for controller and services layer. I need this project completed within one day. So if you have the expertise and time to take on this project, then I look forward to hearing from you.

I am seeking an experienced electronics specialist to help me with a circuit design project that involves a linear synchronous motor. Specifically, I need with a robust driver capable of generating a 3-phase wave form of 2-5hz with variable voltage output to enable a variable magnetic field via current flow. The driver should be electrically isolated from the power circuit which needs to have a variable voltage output up to 60V and able to deliver a current of up to 100A per phase for short durations. Circuit design and parts list required, also the design should be able to be simulated or otherwise proven.

I am looking to make an additional product brochure for this product line. Description: The skid steer rock grapple open-sided grapple is the perfect attachment for sifting rock, grabbing a brush, moving logs, debris cleanup, and much more. It has a 2-7/8” opening between the tines to grab the smaller rocks but still let the dirt fall through. It is fitted with a weld-on serrated cutting edge ½” thick. The serrated cutting edge allows for easy digging of rocks and also helps leave a very nice finish when doing the grading. It is fitted with 2 grapples that grapple independently to secure uneven loads. With a large 48” grapple opening, the bucket can hold large amounts of material to ensure productivity. Built with strong grade 50 steel all throughout ensur...

I am in need of someone to help with medical credentialing for a Physician for medicare and multiple most popular commercial insurances in all 50 states and DC. I have all the required documents and information, but need assistance in completing the paperwork. I am looking for an experienced individual to help me navigate the credentialing process and ensure all necessary paperwork and documentation is submitted properly. I look forward to finding the right freelancer to help with this important task.

I am in need of someone to help with medical credentialing for a Physician for medicare and multiple most popular commercial insurances in all 50 states and DC. I have all the required documents and information, but need assistance in completing the paperwork. I am looking for an experienced individual to help me navigate the credentialing process and ensure all necessary paperwork and documentation is submitted properly. I look forward to finding the right freelancer to help with this important task.

I need a one-time benzene testing at a gas station, which requires air sampling specific to motor vehicles while refueling in California, southern California mostly. I seek a reliable professional with the necessary expertise to provide an details on the testing process and on the presence and amount of benzene in the air while refueling a motor vehicle at the gas station. The testing should be conducted quickly and efficiently, so that proper precautions can be taken if any abnormality is found.

using PIC16F15386 for 9 analog i/p, control 13 latching relay, UART o/p to LCD display, UART o/p to ESP32C3, All i/p to be categorized to 6 levels, hysteresis to be considered, 3 different count down timer for each i/p based on 20ms time base. programming to be using PIC microchip assembly instructions. PCBA, relays, LCD are ready to test the program. a. Programming using microchip assembly instructions. C programming is not acceptable as it not perfect in our project b. The programmer should be familiar with control of latching relays. OR electronics engineer with 8-10 years’ experience. c. The successfulness will be considered if the program work on our ready build project. d. The detailed requirements will be provided if the freelancer accept above requirements.

...number of backlinks required across the 80 keywords is 1618. The project requires hired freelancers to provide backlinks manually created not automated. Must record URL of backlinks for each keyword so we can audit them. Must provide backlinks and associated spam scores so we can remove high spam score links which are no us to us. Ideally, provide backlinks suitable for the Motor industry in Ireland but will accept some non Motor Links ie big directories and common High Da sites. Price is for the whole project which be then sub divided into smaller milestones as the work done and reviewed they be released. Do not apply if don't have good english and don't apply if you don't understand our requirments. We don't want anything else no monthly services, n...

14 cell Li-Ion on 6U Eurocard 160x233.35mm with 1x 90 degree DIN41612 96pin Type C and 1x 90 degree DIN41612 32 pin Type F, DC/DC and socket for Arduino Nano ver 3.x You must do the needed updates to the schematic, and make the PCB, gerber files and BOM. I will send you some files on the sockets, DC/DC and Arduino nano Socket. There miht also be a 6U Eurocard on the net that you can use as template.

We are a new over 50s lifestyle resort specifically catering for active retirees as our homes are designed to accommodate caravans or motor homes. We have a sales team and displays on site and would like a design for two billboards on the main highway to draw more people to visit us. We're located in Burnett Heads, Queensland (on the ocean, east of Bundaberg) and we intend to have two billboards on the Bruce Highway about 100km apart so people travelling north will see both on their way from Brisbane/Sunshine Coast, therefore they shouldn't be the same. The first is probably a teaser, and the second more specific about how to find us. See our website for more about us. See attached our brand guidelines, logo file, brochure. Size: The design should be

Objective There are 12 points to be completed. The details will be shared with the selected candidate. Experience in working with SIMATIC WinCC will be added advantage. C#.net EF MVC CORE Project: Data Visualization with Model-View-Controller - Desired functionality: Data Visualization - Design pattern: Model-View-Controller - Backend database: MS SQL Server Skills and experience required: - Proficiency in C#.net EF MVC CORE - Strong understanding of data visualization techniques and tools - Experience with Model-View-Controller design pattern - Expertise in working with MS SQL Server for backend database management - Ability to create visually appealing and interactive data visualizations - Knowledge of best practices for data visualization and user experience ...

Motor Control Project with STM32 board is STM32F103(Nucleo-64). I have a working code base, I'm needing someone that is experienced that can clean up the code and help add in new features. Functionality: - The desired functionality of this project is motor control using the STM32 microcontroller. - Water Flow Meters - Logging Data - MCU - Water Level Sensor - Normally Closed Manifold Solenoid Valves External Peripherals: - There will be external peripherals connected to the STM32. Project Completion: - The client is flexible with no strict deadline for project completion. Ideal Skills and Experience: - Strong knowledge and experience in motor control using the

...instead add a person towards the front of the cart, or outside the cart ahead of it - they're still a team member but they have a hard hat on, look like safety officer and are representing the person who ensures that whilst the team is rolling along, this person is the one that is trying to shoe the team it's ok to proceed but with boundaries / safety and checks along the way. Like a traffic controller in the team. Drawing 2: if the analogy is that tree's start small and need care and attention and are built / grow slowly, our boss has an upside down tree, where he's overloaded with problems and there's too much going on, and he feels like he and the team are all there with shovels trying to dig the top of the tree out of the ground, to wear it down, to...

I am seeking a stong developer team to work on my new project. The project will be developed in agile mode. I have detailed documentation for the system requirements. Project considered to be a long term project with initial Phase-1. Ideal skills and experience for this job include: - Strong experience with Laravel framework - Strong experience with Postgre - Strong experience with Linux Ubuntu - Experience with custom functionality development - Ability to work with detailed documentation - Strong problem-solving skills - Attention to detail Please ask for Requirmenents document! Once Requirements Document is reviewed provide your detailed proposal on the project!

I am looking for a freelancer who is experienced in working with Kubernetes and Nginx ingress controller. The project involves setting up an Nginx ingress controller in a Kubernetes cluster to handle external HTTP traffic routing. Ideal skills and experience for the job: - Proficiency in Kubernetes - Experience with Nginx ingress controller deployment in a cluster environment - Knowledge of HTTP traffic routing and load balancing - Familiarity with Nginx configuration and customization - Ability to troubleshoot and debug issues related to ingress controller deployment The freelancer should be able to efficiently configure and deploy the Nginx ingress controller in the Kubernetes cluster, ensuring smooth routing of external HTTP traffic to the appropria...

I am looking for a skilled freelancer who can help me with a project that involves playing and recording a midi file using a MIDI Controller. Skills and Experience: - Proficiency in using a MIDI Controller for playing the midi file - Experience with recording software, GarageBand or any other DAW, to record the midi file - Familiarity with the desired outcome for the recorded midi file, which is for karaoke purposes for a back catalogue - It's a simple and straight forward project, please quote the price for 1 song and 10 songs Project Details: - The project involves playing and recording a midi file using a MIDI Controller. - The software to be used for recording the midi file is GarageBand. - The desired outcome for the recorded midi file is for karaoke purpo...

I am looking for a skilled PCB designer to create a custom PCB for a digital valve controller. This circuit will be used to control solenoid valve for water lines. The project requires the following: Basic functions: Control On-Off of solenoid valves based on inputs from cloud, sim based connectivity for inputs Size of the PCB: Large (more than 4 inches) Components: Integrated Circuits Project deadline: Flexible Ideal skills and experience for the job: - Strong experience in PCB design, particularly for large-sized boards - Expertise in working with integrated circuits and their integration into PCBs - Ability to meet project deadlines and work efficiently - Knowledge of digital valve controllers and their functionality would be a plus If you have the necessary skills and e...

Using avr programming in C and simulated in flowing the pdf previously sent need to use wokwi to simulate the work. thank you.

We had a Hard Disk Failure with an issue with Raid on HP DL380 Server. We replaced the Hard Drive and reinstalled the RDS Server from a backup. The RDS Server now has issues registering Office apps on all the users. Our Setup is on a Hypervisor with 2 virtual machines. The Virtual machines are 1 x Domain Server Active Directory Virtual Machine connected with Adconnect to...Active Directory Virtual Machine connected with Adconnect to Azure. Domain-connected RDS Server to the Virtual Machine. So old users in Active Directory can not connect to Office365. However, if I create a new user on RDS Server they connect to Office365 on their RDS Sessions. Need to fix all users in RDS to connect to Office365 apps including one drive and teams. Fix Errors in Logs for Domain Controller and R...

Design of controller for AC System Using Simulink

I'm looking for an experienced professional in LabVIEW to integrate a DAQ or controller to meet my data acquisition and analysis needs. I have the necessary hardware for the integration, including both the DAQ and controller. The required resolution will be 10 bit, though this question was skipped in the response. The LabVIEW integration should be able to handle data acquisition and analysis tasks. Experience in working with LabVIEW and DAQs/controllers is a must. Delivery of the finished product should be on time and to the highest standard of quality.

I have some data in Google Sheets in the format Open, High, Low, Close I want to display this data with an interactive chart similar to tradingview. I have found this example using apache Echarts if you can suggest a different chart package we could use that instead if it is better than the apache Echarts. I will provide a spreadsheets with (Open, High, Low, Close) you need to set up the chart with this data This then needs to be set up on a website which I will provide a basic website template for so you just need to get the code to run on it

...pet grooming efficient, easy, and safe for pet owners and their furry companions. Target Market: Our target audience consists of dog and cat owners who are passionate about their pets' well-being and want to provide them with the best grooming experience possible. This includes individuals of all ages and backgrounds who prioritize pet care and grooming. Our Products: Pet Grooming Brush Firm Slicker Brush Dog Paw Trimmer Dog Nail Grinder Dog Grooming Scissors Kit Evaluation Criteria Logo designs will be evaluated based on the following criteria: a) Originality and creativity b) Alignment with the brand concept and target audience c) Visual appeal and aesthetics d) Versatility and scalability for different applications e) Overall quality and professionalism We ea...

The project is rater small we need to Trim the embankment to a profile. I have all the point in Autocad i just need someone to help me create a surface/ DTM so it can be used with a TS16/ CS20 controller on site

...information from the Victron API, and then for extra information you use the E-Order API using the SKU's retrieved from the Victron API. Downloading all general product information from the Victron API: # { "name": "SolidSwitch 104", "short_name": "SolidSwitch 104", "category": "Accessories", "description": "The SolidSwitch 104 will switch DC loads of up to 70V 4A and ...", "modified_at": "2021-04-20 10:05:40", "image": " 104 (top).png", "documents" : [ ... { "name":"BMS800200104_SolidSwitch 104 (top) ", "document_type":"High quality photo&qu...

need to design a 2 layer PCB which embedded 4 Atmega 2560 micro controller with rs485 protocol , Need a designer who has experience with arduino mega chip PCB design ,

I am looking for a mechanic to help me with a faulty step motor in my 2012 Nissan Sentra. A took the car to AutoZone and a code of p1778 came up. The car is stalling or hesitating while driving, and I need someone with the skills and experience to diagnose and repair this issue. Requirements: - Experience working with Nissan Sentra vehicles - Knowledge of step motor systems - Ability to diagnose and repair stalling and hesitation issues Budget: - I have a specific budget for this repair Parts and Tools: - I do not have access to the necessary parts and tools, but I am willing to purchase what is needed.

I am seeking a skilled freelancer who can help me integrate a Ryu controller with my existing Fabric network to enhance my application's security management. As I require custom integration, I need someone with experience in this area. Ideal Skills and Experience: - Expertise in Ryu controller and Fabric network integration - Experience with custom integration - Strong understanding of security management in networking - Proven track record in successful network integration projects Key Deliverables: - Custom integration of Ryu controller with Fabric network - Enhanced security management for my applications - Detailed documentation of the integration process for future reference

I am in need of a skilled freelancer to design an ...a skilled freelancer to design an amplifier circuit for me. The project requires the following: Power Output: - The desired power output of the amplifier circuit is between 10W and 50W Power Supply: - The circuit should be able to work with a combination of both DC voltage and alternating current Signal Processing: - The circuit should be able to process radio frequency signals Ideal Skills and Experience: - Experience in designing amplifier circuits with a power output between 10W and 50W - Proficiency in working with both DC voltage and alternating current power supplies - Knowledge of radio frequency signal processing techniques If you believe you have the skills and experience required for this project, please subm...

I am in need of a skilled freelancer to help with software coding for an ESP32 based controller for my IoT device. Specific features and functionalities required for the controller include: - WiFi connectivity - SIM800L connectivity (Airtel M2M) - Bluetooth connectivity for reset of the device from our mobile application - Firebase integration - OTA implementation for future updates - RTOS for stability of the device Description of the basic requirement: - The device should primarily use SIM800L module with Airtel M2M sim for internet connectivity and perform required operations, if a user is willing to use the WiFi, the device needs to start connecting to the WiFi network that is being passed from the mobile application through bluetooth. - Once connected need to constan...

Greetings Freelancers, We have an exciting opportunity to develop a comprehensive plugin ecosystem within WordPress (using WordPress plugins that can be on-sold by us, that seamlessly manages the UniFi controller software and Hotspot Manager via their respective APIs (version controlled). The ideal candidate for this project will possess expertise in both WordPress plugin development and Ubiquiti UniFi controllers, which are tools for managing Ubiquiti UNIFI WiFi hardware, systems and networks. We are to gain exclusive rights to the project and its underlying code, providing us with complete control and ownership, with the plan to have the plugins Ready for resell: " The plugin should be fully documented and prepared for resale via the Themeforest WordPress plugin platform,...

I am looking for a skilled freelancer to design an industrial controller for my energy system. The controller will be responsible for managing the energy system and ensuring its efficient operation. Specific requirements for the controller design are in place, and I am seeking a freelancer who can meet these requirements and deliver a high-quality solution. Ideal skills and experience for this project include: - Strong knowledge and experience in industrial controller design - Familiarity with energy systems and their management - Ability to understand and meet specific design requirements - Attention to detail and ability to deliver a precise and reliable solution If you have the necessary skills and experience, I would love to discuss the project fur...

...Radio etc. Modes of transport: e.g., Car, Bicycle, etc. Clothing and accessories: e.g., Hat, Shirt, Pants, Shoes, Socks, Backpack, Umbrella, Wallet, Keys, Glasses, Ring, Bracelet, Necklace, Earrings, Tie, Suit, Dress, Skirt, Belt, etc. Electronics and musical instruments: e.g., Camera, Guitar, Drum, Piano, Microphone, Headphones, etc. Personal care items and cosmetics: e.g., Perfume, Makeup, Brush, Mirror, etc. Animal names: e.g., Lion, Tiger, Bear, Dog, Cat, etc. We welcome additions from categories such as but not limited to sports equipment, scientific instruments, tools, office supplies, architectural elements, nature elements, food items, plants, and more. The list should not contain: Verbs or any forms of action words Adjectives or descriptive terms Names of s...

Project Description: I am seeking a freelancer who can provide training on Motor Control Firmware Development using the STM32 microcontroller platform. I have begineer level experience with firmware development. Requirements: - Proficiency in Motor Control Firmware Development using STM32 -step by step guidance in complete firmware development of motor - Strong understanding of the STM32 microcontroller platform - Experience with general application development in the field of motor control -Experience in controlling speed, Torque ,power,Current,Flux etc of the motor in firmware. - Ability to provide comprehensive training materials and exercises - Excellent communication skills to effectively convey complex concepts - Availability to provide ongoing...

Social Media Manager for Driving School "Driving West Motor School" @drivingwestmotorschool Please like and follow our pages! We are located in Perth Western Australia. We are an established Driving School looking for an ongoing long-term relationship with an experienced Social Media Manager. As the Social Media Manager, your main responsibility will be to: -Post student passes with an already made template and captions from Chat GPT -Create posts with engaging content in our online group regarding road rules and driving (Will provide you with the booklet of road rules) -Once these tasks are completed there will be time to attain new followers and likes through engagement. I would like this position to then move on to chat

...cat in the middle comes closest to the "foundation" I'd like. Particularly the head silhouette. I'm not positive if I want rose in mouth. And I'm not sure if whiskers are correct. But otherwise it's bland. I think the eyes will be critical. Since it's called "Play" and the company relates to bringing on girls who are anime/ video game lovers. I thought about using the d pad from video game controller and putting inside one or both of the eyes. Aside from that there's a ton of creative examples for inspiration. Another contender instead of cat head silhouette, could be the good luck cat on bottom left corner. I thought that was pretty unique. Lastly, this will be for unlimited revisions. I won't be difficult. As long ...

I am looking for an NXP MCU micro controller expert who can assist me with programming tasks using the C programming language. The specific tasks include programming the micro controller, circuit design, and troubleshooting. Skills and experience needed for this project: - Strong knowledge and experience in programming NXP MCU micro controllers using C - Expertise in circuit design and troubleshooting - Familiarity with various micro controller models and their functionalities The ideal candidate should be able to work independently and have a good understanding of micro controller programming principles.