AutoCAD Jobs

construction 3D color printer! To print miniature people, color. Three Dimensional Printing (3DP) - Three Dimensional Printing Printers called 3DP work from a 3D / CAD file with a sliced ​​STL file extension that will be deposited on top of each other until the 3D object is completed. In this technique printing is developed by applying glue to join these layers through a head that deposits the adh...

HVAC design calculations Autocad HVAC Drawings Hospital Departments such as operating rooms, Negative and positive pressure rooms

I'm looking for someone who can send me 0.01 bit'coins this means about $110 I'm ready to pay (200$ in advance) here, but i need the coins in next hours

Searching for a 3D designer with experience in producing technical drawings and 3D modeling to build 3D model of a speargun. It is very important to maintain regular contact during work since design and measures are flexible and not yet defined. It is possible to make only 3D model that is exported in dwg or dxf format, 2D format with all the measures or both. Depending on that payment can be ...

We are doing a remodel in Twin Cities, MN area. It's a 1 story ranch/rambler house, and we're removing about 9.5ft of a load-bearing wall. We would like the LVL beam to be flush with ceiling, and need sketch / plans for the city to sign off/approve. I have a carpenter who will be doing this, not a general contractor. So we just need a sketch / plan of the beam for city engineering app...

I have just purchased a house in Alfreton Derby DE55 4LF and want to have an extension done under Permitted Development and then submit an application to the local council Amber Valley for a Lawful Development Certificate. I'd like some consultation on how to go about this and some other possible work and have the PD drawings done so that i can obtain the LDC cert. You will have to come up w...

I need a Boq for 106sqm building which is a load bearing structure. I have all the plans. And I need a Ms project plan with ghantt chart and task delegation plan for foreman, site engineer and construction Project Manager.

We have project on autocad and we need some advice for design who can think help us.

Need to have a CAD model built of a cane (for walking) with DXF & STL files. The cane needs to be hollow, taper from the top (which will have an oversized head) and come apart in 8" sections that can be twist-lock assembled together. We will use the files to 3D print the cane using FDM printing. Our initial 3D renderings will be provided before contracting.

Attached is 1:27 gear ratio to speed up the rotations. The output shaft will have contra-rotating feature, what that means is outer part of shaft rotates in one direction and inner rotates in other direction. So when I attach propellers to it, they will run in opposite directions. The gearbox file is attached. You can use it and make the output shaft with inner and outer arrangement for contra-ro...

I use AutoCAD and am working on my skills daily. I need a portfolio to show my work. Also I market for my company , no idea how that can play into what I currently need to show my work. How should I proceed about this?

Hi i am looking for an structural engineer that can calculate the structural and dynamic loads of a skate structure we already designed in autocad in 3D. We need a freelancer that can finish our project fast like in 1 or max 2 day's and is very precise in his/her work.

I need 3 renderings, 2 Human angle and one aerial view for our Villa project.

Need an upcoming talented Civil Engineer/Architect to get the plan, construction drawings along with elevation. CONDITION: The Architect should provide me a sample of sketch for my need, only if I am satisfied I will award the project. Thanks!

we are a manufacturer of electric vehicles

Design of car service and repair station to be [login to view URL] layout already [login to view URL] design and interior designing required to be done for 4000 sq ft area

Design of supporting brackets for ATEX boxes, need in detail structural drawing justifying dimensions and also able to supposrt the ATEX box weight in varying conditions. Details will be shared with the agreed partner.

You will be responsible for designing, 3d modeling and working drawings.

Renovation project for a home in León, Spain. The project will be done by myself and I need the signature by an official architect it to present it at the city hall of León and get the building license.

Booth design that includes 2 panels (A1, A2: 97.3x229.5 each) and a front desk (C2: 97.3x63cm). Files need to be se nt in PDF/TIFF/JPG formats only. At least 600 DPI The design needed is ONLY for A1, A2, C2 and booth name on top.

Seeking an individual with strong knowledge of Sketch Up who can incorporate my landscaping and exterior plans and incorporate them into my existing Sketch Up plan of existing home. Please respond with details on your existing sketch up knowledge and if you have any experience with Landscape/Exterior design

3D modelling render of residential building required. Plans, elevations and site plan provided in AutoCAD dwg file

Please Sign Up or Login to see details.

3 story multipurpose building. Need CAD finish plans developed from finish plan sketches. Need CAD RCPs updated with noted PDFs to be provided.

Looking for an experienced Revit user who can build luminaire symbols with IES file attachments. Must show portfolio of projects before commence.

I am looking for a CAD specialist and/or home designer to prepare the floor plans, or ideally, the construction drawings, for construction of a three story home. The ground floor will be a slab on grade 4 car garage. The second floor will be living area with two bedrooms, full bath, kitchen, and open living/dining area. The third floor will be a master bedroom, master bath and an office. Approxim...

I am looking for CAD, Specifications, and an Installation Guide for a natural slate roofing process that my company calls Slate2. This installation method creates a lightweight slate roof. The process has recently become available for marketing because its patent has expired. The one company currently offering it has their own guide and YouTube demo of the process. I am looking for a company...

We are looking for an estimator to do a takeoff for an interior renovation project. Attention to detail should be paid to CSI divisions 2-11. Must be able to do the work in Planswift and deliver the full Planswift folder/files when finished.

Please include UL891 in your bid to be considered. I am looking for an Electrical Engineer or someone that is experienced on designing Electrical Gear. We are a Electrical gear manufacture that recently took the UL891 switch board builders coars to build switch boards. I am needing someone to thoroughly read the UL891 document and design switch boards based on the requirements. There will be El...

I want help in designing a gate latch lock. This lock will need to have a key access and also small servo motor to remotely unlock. Weill have to have spot for batteries, motor, PCBA (computer chip) and optional camera. Conceptually something like the link here [login to view URL] but have a smart lock. Attached is a non smart lock

I am in need of a 3D model Design for a restaurant/hookah lounge. I have the full blueprint with the dimensions from the Architect in Auto cad. I need someone to work along with me through the design and layout of the whole store. I have uploaded the Auto Cad design, please bid only if you can cooperate and give the design great detail along with feedback.

Remote AutoCAD design work designing warehouse layout. Preferred the resource has own CAD software. Must be US based.

We are a custom remodeling and building company. We need plans drawn to turn an office into a shower room and a laundry room. Also plans to add framing around a concrete block foundation so insulation and Sheetrock can be added.

CAD design of furniture products you must have Autodesk Inventor 2019 or 2020 and AutoCAD, speak English and work on UK time to apply.

3d animation with planning to design

I have worked on Theo Jansen, my group selected a rhino. Where have to walk. I need: - SolidWorks (3D) / Autocad (3D) drawing, each separate part and assembly (Rhino will be made of 8mm MDF); - Drawing in AUTOCAD (2D) to be cut on the laser machine; - rhino height is 50 cm The project has to be done from scratch, I have no dimensions or anything. PLEASE PUT REAL VALUE INTO THE PROPOSAL REMINDI...

Hi we’ve got floor plans and themes for a wedding- we need a designer to put these into a 2D layout format with an aerial view showing all the different elements on the hotel floor plan and also possibly 3D render designs

I am looking for a CAD specialist and/or home designer to prepare the floor plans, or ideally, the construction drawings, for construction of a three story home. The ground floor will be a slab on grade 4 car garage. The second floor will be living area with two bedrooms, and the third floor will be a master bedroom, master bath and an office. Approximate dimensions of 48' wide by 30'...

I need a new website. I need you to design and build my online store. The objective is to build a 3D ring configurator. We will require the ring to move around and allow the EU to change setting of the ring and custom build the ring. This technology is offered by webGL or [login to view URL] and must be a ring builder type of platform where a customer can build their ring by choosing a diamond and...

I am designing a 3 level commercial building using steel shipping containers and I need structural analysis and calculations to include in drawing and specifications.

I need patterns of the backpack segregated and their cut patterns laid out on media (fabric) with width 58".

Will need CAD drawings and sketches drawings for the interior of a residential client. I have been taught this but as I haven’t had time to practice it would take a an age to get them done. I’m looking to get an idea of costs that may be involved.

I need a 3D model of something.

I'm an interior designer, my dream is to make anew line on interior design that meets the clients need in a sophisticated way, I have a diploma in interior design from national design academy and my skills in taking information from the client and converted into a design that satisfies the client and serves its aspirations. I am familiar with the use of CAD, sketching and Sketchup software

We are looking for architecture/ design students to join as intern at our virtual office. You will be responsible for designing, working drawings and details and 3d modeling. Autocad and Sketchup is must.

I need Jewelery designers who can work in cad.

I am looking for complete steel design including beams and framing profile for a floor 1800sft approx. Details will be shared with shortlisted candidates.

Hi I need a 3D Modelling, AutoCAD expert for my current projects. If you have knowledge please bid. Details will be shared in message with the freelancers. Thanks

We are a staging company and like to be able to provide drawings for our customers. Till now we have only provided 2D drawings which we could manage LOL but are wanting to do something a little more 3D. Our skills are minimal and attempts thus far poor ! We would like for someone to improve on what we have done so far.

I need to turn a two bedroom house in three bedrooms, house is totally open, not walls, making second full bathroom