Arduino stepper motor project jobs
Build me Home Automation System using Arduino
I am seeking an experienced Arduino professional who is able to provide assistance with setting up a Nano model. This job requires someone who is familiar with the different components and their specifications in order to ensure proper setup. I am not in any particular rush to have this task completed and am looking to hire someone with the right knowledge and dedication to get the job done properly. If you feel your Arduino skills are up to the task and you have the necessary time to allocate to helping me out, please reach out.
I am looking for an Arduino professional to help me with my project. I need someone who can develop hardware, program the software, and debug any issues that arise. I have an existing Arduino system in place so I need someone to do the wiring connections and code it. My project requires an understanding of C, Python, and Java Programming as well as familiarity with Arduino tools and techniques. I'm looking for a professional that is knowledgeable and reliable. This person must be able to work with me and meet any deadlines. If you have the skills and experience to complete this project successfully, I would love to hear from you.
I have a board, i need someone to build some codes to test the functionality of the boards. Its pretty simple, will share the schematic so one can refer the pinout. I just need some basic codes well written and editable so i can test the board well. Budget is fixed to 600 INR maximum, since it's fairly simple task.
We are urgently searching for a concrete help for completing a python program in order to control from a PC with Windows 10 via ModBUS 8 stepper motor driver D1 from IGUS all connected via ethernet. Deadline is one week from today. A simple sketch will be given to the candidate. Some additional tasks needs to be added including time to start and stop program, fault and error management and emergency stop phase. Freelancer needs to be skilled in ModBUS protocol and CANopen Experience More details like driver datasheet and basic python script would be share with suitable candidates
This is the project to source motor and gears for the grabber.
We are urgently searching for a concrete help for completing a python program in order to control from a PC with Windows 10 via ModBUS 8 stepper motor driver D1 from IGUS all connected via ethernet. Deadline is one week from today. A simple sketch will be given to the candidate. Some additional tasks needs to be added including time to start and stop program, fault and error management and emergency stop phase. Freelancer needs to be skilled in ModBUS protocol and CANopen experience. Best candidate needs to skim through the freely available manual in order to comprehend the telegram protocol and provide concrete help to our internal programmer. Please avoid unexperienced people or even lazy one.
I am looking for someone who can code for esp32 to use two PN532 devices via the two I2c connections (two wire) . Please someone who can create and test it with own PN532 and esp32.
To clarify. This is for a bicycle. We are looking for a small sized motor that is mounted on a bicycle type transportation. I am looking to have a 3D printed Wankel motor created using plastic (or metal) material. The desired output is a prototype. My goal is to find a skilled freelancer who can create this 3D printed Wankel motor with accuracy and precision. The material must be 3D printed in plastic and have a high feature size. By this I mean each component needs to be individually printed, we are not looking for a general image of this, rather a plastic prototype. I need the prototype of this Wankel motor created swiftly and with quality results. A successful completion of this project will allow me to evaluate and test the design work for possible fu...
Need a simple code to display the speed and RPM from the sensor on the LCD Matrix display. there us already a sample code. We just have to improvise it. I have all the hardware , if we connect on the call and flash the code we can get this done.
I am looking for an experienced programmer to design and build a PWM Motor Driver for a project. This driver must be a DC Motor Driver with the ability to operate at high voltage, between 12-84V. The system should also be able to handle high power, at over 50 HP. The ideal freelancer for this job should have experience working with motor drives and be confident in their ability to develop a driver suitable for the given range of voltage and power requirements. They should also be knowledgeable about coding, design, and any other relevant skills such as debugging and testing. we need a sample piece for testing. If you feel like you are the right fit for this project, please let me know. I look forward to hearing from you. NOTE : WE NEED SOME SPECIAL FEA...
We are trying to build a robotic arm for amputees that works based on EMG or EEG sensor, motor driver to run the BLDC motors (12V), and Arduino board. For the project we are using an opensource 3D printed arm and materials that are available in the market.
I need to implement MPCC for dynamic performance of SPMSM. The hardware setup is ready To implement MPCC for a Surface Mount Permanent Magnet Synchronous Motor (SPMS), the following steps can be taken: Develop a model of the SPMSM: This involves deriving a mathematical model that describes the dynamics of the SPMSM. The model should capture the nonlinearities and constraints of the system. Design the MPC algorithm: The MPC algorithm uses the model of the SPMSM to predict the future behavior of the system and generate optimal control inputs. The algorithm should be designed to handle the constraints and nonlinearities of the system. Implement the MPC algorithm on the TMS320F28335: The MPC algorithm can be implemented on the TMS320F28335 using Code Composer Studio. The algorithm s...
I am Looking for Aerospace Engineer with an experience in Design and Engineering of Radio Controlled (RC) model of Aircrafts or Drones. Small Project, need design and engineering of detachable Wings and Tail unit for predetermined configuration of small RC model of all electric Aircraft / Drone (880mm Wing Span, L= 1600mm, MTOW 55-60kg), as shown in the attached images. More Images and info will be provided after job acceptance. Project need to be completed in 3-4 weeks SKILSS ARE REQUIRED: Aircraft Design and Engineering, RC Aircraft Models / Drones Design and Engineering, Aircraft Performance Calculations, Mechanical / Structural Engineering, CAD/CAM JOB INCLUDES: 1. Calculations of major performance parameters of the predetermined RC Aircraft/Drone Model configuration...
I am looking for someone to help with a project in regards to an Arduino Can Bus Engine Guard. Specifically, I am looking for someone who can write a program for an Arduino Uno to work with MCP2515, LCD 20x4 and a GSM 900. The unit will only connect to the vehicles can-bus. It must get some readings from the ECM and when a fault occurs it must respond with relay outputs and can-bus signals to do certain things in the vehicle. The GSM must send out message alerts and also receive certain commands via sms, Whatsapp and Telegram to tell the vehicle what to do. Thank you!
I am creating a project that will be collecting pressure readings from the Dwyer MSX-W22-IN-COM-LCD via modbus and record the readings in a csv file or on the cloud and able to download from an external device. Data in the csv file to include test port location, pressure reading in inches water column to the thousands place -0.001, and time the pressure reading was collected. I will be using an Arduino Opta RS485 mini PLC. MD#AFX00001 as my board. • Will also need to communicate to relay boards via modbus to control 40 solenoids and collect pressure readings 1 time a day from the 40 solenoids with a 5-minute pause between each sensor. It will then need to take samples every 30 min to record the readings on the vent riser. • Will need remote access login to dow...
Hi. I need an experienced programmer for RaspberryPI Arduino & Microcontroller
Another thumbnail design. I have attached one I like as well as the another with a car. The scope of the thumbnail is to attact youtube views on a new car project build. We will be installed an M113k Motor into a vintage Mercedes 300SEL (Car as Shown) I would like a European license plate on the CAR reading EDMOGARAGE. Text should be M113K Motor into 1969 Mercedes? Question mark is important. This for an existing youtube channel and we will have 20-30 videos showing process. Thank you
It should be portable (running on battery) and should have an auto-cut option once the temperature reaches desired value a small motor for stirring the water. None of the mechanical components fall under this scope. Just need off-shelf components to design a circuit.
Have working code of a sacra robot, raspberry pi 4 gets data (PIXEL Data) from a vision sensor through TCP/IP, convert it to the real world coordinate and then to motor coordinate, send that to a PLC Via modbus, which then runs 2 AC servo Need professional python coder who can standardize the process
We have an industrial cement mixer at our precast factory. We would like to engineer a pneumatic clutch into the motor/gearbox connection for Lock Out Tag Out/Confined Space Entry. Basically, when the compressed air is locked out the motor shaft disengages from the gearbox.
A program for a Siemens Logo PLC to control a motor – (0 – 10Volt or 2 – 20 mA output) Two triple pole rotary switch inputs – (9 possible results) Rotary switch No. 1 selects dose value, namely 7.5ml, 9ml & 11ml – (the values are recorded in a table that can be changed by a supervisor) Rotary switch No. 2 selects the dose strength, namely 1x dose, 2x dose or 3x dose – (the values are recorded in a second table to enable the supervisor to change the value of 2x & 3x if required e.g. 1x dose, 1.5x dose or 2.2x dose) The run function will only give an output if both switches have a value selected, ie, if Rotary switch No. 1 or No.2 is on position 0, there will be no output value. The output value in each of the 9 possibilities will relate to ...
I want a Good content writer to write content for website. This is for approximate 2 pages. It’s for a motor vehicle dealer website
A program for a Siemens Logo PLC to control a motor – (0 – 10Volt or 2 – 20 mA output) Two triple pole rotary switch inputs – (9 possible results) Rotary switch No. 1 selects dose value, namely 7.5ml, 9ml & 11ml – (the values are recorded in a table that can be changed by a supervisor) Rotary switch No. 2 selects the dose strength, namely 1x dose, 2x dose or 3x dose – (the values are recorded in a second table to enable the supervisor to change the value of 2x & 3x if required e.g. 1x dose, 1.5x dose or 2.2x dose) The run function will only give an output if both switches have a value selected, ie, if Rotary switch No. 1 or No.2 is on position 0, there will be no output value. The output value in each of the 9 possibilities will relate to ...
I need a firmware for faculty for the arduino to communicate with the CH376S (via UART) and write a text file located on a DS card drive connected to the CH376S, when connecting the Pen Drive to the USB connector of the CH376S they are transferred to the pen drive the file: Temperature, date and time saved on the SD card separated by date.txt. This is the first stage of a larger project, so this could lead to more work. Sorry for my English, I'm Brazilian.
It should be portable (running on battery) and should have an auto-cut option once the temperature reaches desired value a small motor for stirring the water. None of the mechanical components fall under this scope. Just need off-shelf components to design a circuit.
Assalam o alaikum, I am looking for electrical engineers from Pakistan having good skills in report writing. Writer must have experience in Circuit design, Schematics and programming multiple microcontrollers like Pic, Arduino and raspberry Pi. Requirements: Plagiarism Free Reports Properly formatting of reports Good Writing skills
Looking to develop a coding software for kids similar to scratch 3.0. The software will have features similar to the open source scratch platform with added extensions and custom additional features to support other functionalities such as hardware interaction with arduino and esp boards.
I'm looking for an expert in Arduino firmware and driver libraries. The goal is to create a library for a variety of sensors/modules controlled by Arduino Nano. We would start with simple modules (buttons,buzzer,accelerometer,…) then next jobs would involve harder ones (Ethernet,oled,wifi,etc.). We already have a few modules done that can be used as template. We are looking for someone who would like keep working with us for more modules in the near future if possible. All your code will be tested with the real modules so you must know how to debug and fix if needed.
DC Electric motor of our own design. NDA's and strict confidentiality is a must.
...intermediated market in home and landlords products. Product 2 name: OneMotor Product description: personal and commercial motor insurance in One policy Key points to highlight: OneMotor is a combined personal and commercial motor policy with options for wraps, tools of trade, etc. This product will launch just following OneHome. Our portal, OnePatch, uses a rego look-up to auto populate vehicle details to save brokers' time. Clover allow up to 10 vehicles with a nominated driver, which is consistent with current market practice for fleets less than 25 vehicles). We are bringing new capacity to the broker intermediated market in commercial and personal motor. I would like the videos to be in an animated style to tell the story about the product using...
Need a clean website for Motor Vehicle Accident Injuries. A free estimate from a lawyer Users need to enter zip code and pick type of injury Attaching an EXAMPLE of what we want- from another website:
I'm looking for a developer to complete a website for my photography business. The site will be an e-commerce, portfolio, website. It will need to have a custom gallery and cart, and I will be hosting the website myself. I am a motor sport photographer, and I commissioned a developer to create a new website for my business that hosts my images, displays them for sale, and then allows login to download the images from an account. I hired a developer on here a few weeks ago that started working on the site, but it turned out he was a scammer from China claiming to be from the Ukraine and he got kicked off Freelancer, leaving me with about 9 days to get the site to a point that it is usable for my first event. A lot of work has been done already, you can either correct the unf...
Dear sir or madam. I would need help with programming. I already have an arduino program for my design (pcb with atmega328 ic) - it is about temperature regulation and also I use 1.3inch lcd display with ST7789 board for showing data. The problem is that if the screen freezes, it doesn’t refresh automatically and stays freezed (I need to unplug and plug again the power). I would probably need separate program for the screen, which would recognize when the screen freezes and then refresh it. Or do you maybe know any other solution? I hope that someone could help me. Have a nice day! Gašper Vidmar
Looking for a design for t shirt and or small patch for MC club. Would like the LoCo incorporated in motor cycle design will attach our current design and a idea of what we would like
Project to be delivered quickly. Do not bid blindly without reviewing the requirements and expect us to have a discussion later. Please ensure your timeline is realistic and you will stick to it. I am looking for a freelancer to create a simple Arduino project that demonstrates the use of an Analogue NC NO switch. Arduino Nano Project 3 1. On start up must be able to assess 6 separate analogue switches during a 10 second window. 2. During the 10 second window a piezo buzzer should sound (beeping on and off) so the user understands the Nano is assessing the switches 3. The Nano should be able to recognise whether the 6 switches have been set in a Normally Open or Normally closed state. This will change after every use. 4. If a NC or NO switch subsequent...
Interfacing a Dwin HMI display to display a string at a specified address via an Arduino Arduino used should be Arduino mega 2560, the given dwin HMI display is DMG80470C070_15WTR Arduino is connected via a TTL<->RS232 convertor to the display the string obtained, which is to be displayed on the display is variable in nature and will change into the corresponding value in the full program this snippet is designed to slot into
Is there any posible way of measuring moisture in grain with arduino? What sensor to use? Are there any cheap sesor which can do that?
We have a bottle stickering line wher...a bottle stickering line where bottles go over a Assembly line where the bottle goes through a product sticker (marked with a laser sensor). when the laser sensor has been triggered a new label will be pushed foward for the next bottle. This system is now broken. This works with a HMI touchscreen. The manufacturer does not respond back, so we need to make a new solution. I am thinking about a arduino/esp32 for the coding. We have relais, the wave a plc controller type: DVP-14SS2 (if even needed) We have a large steppenmotor and a label reading unit (that can be ignored if we use the sole steppenmotor). Can someone help us with this so that the sticker unit can work again. We have many more projects within our company, so it will be a longer co...
I have a battery cell balancer with a Bluetooth app, I have already wired a UART-USB converter to the chip and I am reading data successfully from balancer via Termite. I only need to analyze this data now and write code to display cell voltages. This is data I am receiving from Termite: I have the protocol document also 05 2c 02 2b 56 01 02 02 3a 6a e2 6e 1b 08 02 02 .,.+V...:jân.... 22 03 02 20 02 02 02 02 fc 1d 24 81 60 5e 00 02 ".. ....ü.$`^.. 42 95 07 d5 17 fc 02 02 02 80 06 02 02 02 02 02 B•.Õ.ü...€...... 32 2 1d 2f 81 61 5e 00 02 42 95 07 d5 1f fc 02 02 02 ./a^..B•.Õ.ü... 80 06 02 02 02 02 02 12 €....... 19 24 81 60 5e 00 ...
I looking for freelancer who can write for me sketch to Arduino. for autoleveling platform in my toy. Giroscope gived signal to ESP32-wroom (left/right deviation) and turn on/off 4 selenoids (two to left side, two to right side). This selenoids connected to air-bags. To ESP32 connected two pressure sensors too - to read minimum and maximum pressure, and bellow fixed values (max/min) not run selenoid. PLEASE do not bid if U want to increase the amount when chat !! I have accept only true bids - if U bid $50 - U want $50 per job. PLEASE chat me after bid if U interest this project.
needing a logo for a motorsport page and U tube channel, Needing the logo to be able to use as letter head and Profile Pic as well as make the intro with using it as well, all should be racing inspired, and car themed. This is basied in Perth Western Australia This page is going to be around motorsport events i.e racing/ car show/car runs in WA as well as merch Colours Black And gold Name is: Motor Sport Life WA
Hi review the code for controlling stepper motor using joystick and check distance by ultrasonic module that written by arduino ide and accel library
New project for the changes to the previous Arduino project.
Led strip turned on gradually by ir sensor and stays on for fixed amount of time. Maybe controlled by Bluetooth. I have Arduino nano, ir sensor, led ws2812B, Bluetooth module hc-05, power supply, capacitors, resistors, breadboard, Arduino IDE with FastLED library.
Create short, creative, interesting animation of our company logo. See examples of nice animation Our company makes electric motor controllers. Attached are versions of our logos in full color, black only, white only ***************************** IMPORTANT ******************************************************** the contest is about animating the logo. It is not about modigying the logo or creating a new one ***************************************************************************************************
Part A: PCB design, Design the schematic and PCB of the Arduino Uno R3 in Proteus and, Part B: Failure analyses.
