I need a LabView Programmer

Hi Good afternoon , I have read the brief details on your job listing . I see you have been looking for someone with experience with PLC & SCADA, Microcontroller, Software Architecture, Arduino and LabVIEW. Its been 8 years since I have been working on freelancer.com, I have 9 years of experience doing similar jobs. I would request you to check my profile and review projects, feedbacks of projects related to those skills. Questions: 1. These are all the requirements of your job or do you have more? If yes, Please provide detailed requirements in chat and let me review and get back with queries. 2. Do you currently have anything done or this job has to be done from scratch? 3. What is the timeline to get this job done? 4. Are you open to use 3rd party APIS for it even if they are paid? Why Choose Me? 1. I have done more than 250 major projects only on freelancer.com. 2. I have not received a single bad feedback since last 5-6 years. 3. You will find 5 star feedback on last 100+ major projects which shows my clients are happy with my work. Portfolio: https://www.freelancer.com/u/AwaisChaudhry Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) Please initiate the chat so we could discuss it in detail and we will continue from there. Thanks! Awais

Hello I have got your job posting “I need a LabView Programmer” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics embedded systems(LABVIEW, Arduino,Rasberry pi ,ARM processors ,PIC microcontrollers, ESP Wifi/Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so I will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure. I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

Hi need more information about the project I can design schematic, PCB and write the firmware for you I have experience working with LabView. I can send you some of my previous design I am an electrical engineer with expert in microcontrollers and embedded programming Thanks

Hello sir I am computer engineer and I am certified LabVIEW architect CLA and embedded CLED developer , i worked on different hardware manfactures including NI Crio,Cdaq ,pxi AND OTHERS ,,so may I can help you? thanks ,,,,,,

We are a team of Electrical and Electronics engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Also we have good command over report writing, I can show you many samples of our previous reports. Kindly consider us for your project and text me so that we can further discuss specifically about your project's main goals and requirements. We can deliver your project efficiently within timeline. If you choose me, I think you won't regret. Best Regards.

My approach for this project is to first understand the existing system and its architecture. This will help me get a better understanding of the existing infrastructure and the changes needed to be done to achieve the desired outcome. Once I have a complete understanding of the existing system, I will be able to create a LabView program that can be used to control the software systems for the hardware mentioned in the project description. I will work closely with the local developer to ensure that the program is designed in a way that is easy to maintain and operate. I will use my expertise in LabView programming to create a program that is efficient and reliable. I will also strive to ensure that the program is optimized to reduce the amount of resources needed to operate it. Additionally, I will use best practices and industry standards to ensure that the program is secure and compliant with applicable regulations. Please let me know if you have any additional questions or concerns about my approach to this project. I look forward to working together to create a successful program.

Hello, I am CLD certified Labview developer with over 15 years experience in tests automation so probably I can help working remotely. Please provide full details and requirements. Best regards, Nicolae

⭐⭐⭐⭐⭐I am senior Firmware & PCB Design,Java, C#,and C++ Developer ⭐⭐⭐⭐⭐ Hello I am Inigo H. I've seriously read your post and I have understood what you need. I am sure that I can be the best developer who can perfectly complete your project. I am a senior Firmware developer with 15+years of experience. I have rich experience in firmware development with ESP32 ,STM,ARDUINO,RSPBERRY and PIC,PLC,FPGA,etc. I also have rich experience GPRS, GPS, SMS, IoT I also have rich experience PCB Design. I have also rich experience C#,C++,QT,Java programming I have completed 100+ Projects over Freelancer with all 5 Star rating...without letting down a single Client....As Many Clients are still in touch based on my Working strategies and their satisfaction on their all previous Projects. I think it is necessary to discuss further over chat. Best Regards !

Hi! I have understood your requirements about your project with every detail of it. I am an Electrical Engineer with more than 9 years of experience in electronics, circuit design, PCB layout, Verilog, FPGA, Embedded systems, microcontrollers, Proteus, Arduino, ESP32, Raspberry pi, NB-IoT, MATLAB, PLC Design, Algorithm, and Product design. I can assure satisfactory work. I'll be glad to work with you. Thanks

Hi, I'm an electronics and electrical engineer from Sri Lanka. I have worked in a photometry laboratory and have done following integration work with Labview. 1. Yokogawa power meter data acquisition 2. AC power supply control We had Labsphere LMS 400 integration sphere system at the Lab and I have a good knowledge and experience in photometry. I have many years of microcontroller programming and SCADA experience too. I would like to hear more details about your project. I firmly believe that my background is a good match with the project. Thank you.

Hello I am LABVIEW developer i know LAVIEW 2017&2019 Programs very well i have done many projects before such as electronic devices test steps,measuring current,volatage,power,simulating its graphics..etc in these projects i used cdaq NI 9174 and NI modules;digital,analogs..etc so i can do your project/job too

Hi, I have 15+ years of experience in LabVIEW and completed various Automation projects. Please let me know, if you would like to proceed further. Thanks

OK, I got what you want. As a senior developer, I've rich experiences and can provide you high quality result in time per your requirements. First of all, I would like to discuss more details about your project. Please feel free to message me. Best, thanks

Hello. I am an electronic engineer. I have a lot of experience with PCB design and MPU programming. I hope a cooperation. Regards.

●●● Let me take you into a deeper experience, make a moment a lasting conveyable memory. Let me help build your success. Dear, Client! It is my pleasure to establish a proposal regarding your project. Reading your project description carefully, I understand all aspects of what you require, and I am confident that 100% of your requirements are crystal clear to me. As a Senior Developer in the web world, I have already gone through many realities and have become a great web magician in result. High Responsibility and High Quality that are my core attributes would help you achieve your expectation result on this project. Could you please view my primary skills and confirm how my skills may be of use to you? I would appreciate it if you could get a reference from my profile. https://www.freelancer.com/u/vasylhyrtopan Kindly drop me a line to get to know me better and start working together. Kind regards, Vasyl Hyrtopan.

Hello I am highly experienced with labview programming, i have done projects for a electrical appliances company for test purposes. i can share more details when you request. for more info we can discuss.

Hello İ am labview programmer İ know labview programs very well İ used labview 2017,2018,2019,2020 And i Used NI 60001,cdaq 9174 and modules So i can do your projects too

Hello I am a Professional Electronics engineer and experienced in labview. I have experience of controlling instruments such as DMM, Spectrum Analyzer, Network Analyzer, Power Supply, Switching system over serial, gpib, usb and Lan interface. Rest we can discuss in DM. Regards

Hello Beadie, We would like to grab this opportunity and will work till you get 100% satisfied with our work. We are an expert team which have many years of experience on Microcontroller, Software Architecture, PLC & SCADA, LabVIEW, Arduino Please come over chat and discuss your requirement in a detailed way. Regards

Dear Client, I have over 10 years of experience with LabView, and I am confident that I can provide the programming services you require. I am well-versed in creating software systems that can control hardware, including microcontroller stages. I am also familiar with the specs and have a track record of successful projects in this domain. I have a keen eye for detail and will make sure that your project is completed on time and to your satisfaction. I am available to discuss the project further at your convenience and provide a timeline for completion. Thank you for considering me for this project.