Firmware to read USB flash drive using CH376S and STM32

Completed Posted 1 year ago Paid on delivery
Completed Paid on delivery

I need a firmware for the STM32G031 to communicate with the CH376S (through UART) and read a text file located on a USB flash drive connected to the CH376S (through USB connector). This should be easy if familiar with the CH376S. Ideally you would have a CH376S and STM32 of your own to test with, but we can test on our side if needed. This is the first stage of a bigger project so this could lead to more work.

Microcontroller Electronics PCB Layout C Programming STM32

Project ID: #34189459

About the project

8 proposals Remote project Active 1 year ago

Awarded to:

mahmoudralizadeh

Hi Let's talk about more details of your project I have the stm32 board just need to get ch376 chip to test the final device I am an electrical engineer with expert in microcontrollers and circuit design Thanks

$60 USD in 5 days
(14 Reviews)
4.5

8 freelancers are bidding on average $53 for this job

chityalashailesh

Experienced Embedded with a demonstrated history of working in the industry. Skilled in C#, Textile Design, Computer-Aided Design (CAD), C (Programming Language), and C++ arm cortex stm32, AVR . Strong hardware design More

$20 USD in 7 days
(1 Review)
3.7
imtiazsyed006

Dear, I am a control systems engineer with experience in embedded systems and electronics. Recently I completed a task similar to this one. It was about reading and writing data to an SD card using SDIO protocol at 5.4 More

$250 USD in 9 days
(0 Reviews)
0.0
arham0122

I have understand your project requirement. You need a Firmware for the STM32G031 to communicate with the CH376S through UART and read a text file located on a USB flash drive connected to the CH376S. I will do this wo More

$20 USD in 7 days
(0 Reviews)
0.0
Chachan87

Hello, I am an electronics and telecommunication engineer and my major is wireless systems' design. I am experienced in hardware and embedded systems' design. I have designed/printed/tested many PCBs and I am quite exp More

$20 USD in 7 days
(0 Reviews)
0.0
MaksymIlkiv

I have good experiences and skills of firmware programming. I want lonterm working for this big project. Maksym

$20 USD in 7 days
(0 Reviews)
0.0