Bond simulation between concrete and rebar using ANSYS workbench or Mechanical

2-Mechanical engineering, vibration, Ansys, Fluent, Dynamics, Control, Abaqus , Finite Element Analysis ,Computational Fluid Dynamics Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

Hi, Im a Mechanical Engineer and also an expert in ANSYS simulations. I can provide the required ANSYS simulation work with the report generated for the requested work. Please check my portfolio for sample works. If needed, I can provide a sample work for the given work. Regards Ishan

Hello I have carefully reviewed the requirements and believe that my skills and experience make me a suitable candidate to assist you with this task. Here is an overview of my proposed approach for the project: Understanding the Requirements: I will thoroughly analyze the project requirements to gain a clear understanding of the specific COMBIN39 elements you need to use and the desired format for the F/D graph. Data Collection and Preparation: I will collect the relevant data for the project, including the necessary inputs for the COMBIN39 elements. If you have the data readily available, I will review it to ensure its suitability for the analysis. COMBIN39 Analysis: Using the provided data or the data we have prepared, I will apply the COMBIN39 elements to perform the required calculations. F/D Graph Generation: I will generate the F/D graph based on the results. The graph will clearly depict the relationship between the variables and any other insights you wish to highlight. Step-by-Step Demonstration: I can create visual aids, such as screenshots or diagrams, to illustrate the process. The demonstration will empower you to replicate or understand the steps taken for future reference. Collaboration and Feedback: I will be available to address any questions, concerns, or revisions you may have. Regards Fariz Aneeq

Hi there, I am a mechanical engineer with expertise in Design, FEA and CFD. I can do the concrete rebar simulation with COMBIN39 SPRING in Ansys. Please share the CAD model, boundary conditions and material details. I am looking forward to work with you. Thanks, Ishwar

Hello there! My name is Collins, and I'm a mechanical engineer with extensive experience in engineering, finite element analysis, and simulation. I've used Ansys workbench or Mechanical to create the bond simulation between concrete and rebar. As you requested, I would use COMBIN39 elements to produce the F/D graph required for your project. COMBIN39 is a unidirectional element with nonlinear generalized force-deflection capability that can be used in any analysis. The element has longitudinal or torsional capability in 1-D, 2-D, or 3-D applications. The longitudinal option is a uniaxial tension-compression element with up to three degrees of freedom at each node: translations in the nodal x, y, and z directions. No bending or torsion is considered. The torsional option is a purely rotational element with three degrees of freedom at each node: rotations about the nodal x, y, and z axes. No bending or axial loads are considered. I believe that my skillset makes me the ideal candidate for this project. I'm available for long-term projects as well as short-term ones; therefore you can rest assured that you won't be stuck with me for too long if you decide to hire me for this job. I look forward to hearing from you soon! Best regards, Collins

Hi Employer! Thank you for considering my bid for the bond simulation project between concrete and rebar using ANSYS Workbench or ANSYS Mechanical. I am excited to offer my expertise in conducting this simulation and providing you with the desired F/D graph and detailed steps. Using the COMBIN39 elements, I will accurately model the bond behavior between concrete and rebar, capturing the intricate interaction between the two materials. By implementing the appropriate material properties and bond-slip characteristics, I will ensure a realistic representation of the system. Throughout the simulation process, I will meticulously follow the necessary steps, including geometry preparation, meshing, material assignments, bond-slip modeling, loading and boundary conditions setup, analysis execution, and post-processing. Upon completion, I will provide you with a comprehensive report outlining the simulation steps and presenting the F/D graph derived from the results. Thank you for considering my proposal. I am eager to work on this project and deliver accurate and insightful results. Best regards, Ahsan

I will do this project according to your required specifications and will perform Finite Element Analysis (FEA) using ANSYS Workbench and Solidworks. I'm expert mechanical engineer in the following services as well. 1. Structural and Truss Analysis 2. Fatigue Analysis 3. Thermal Analysis 4. 3D modeling 5. Flow Simulations 6. Modal Analysis 7. Finite Element Analysis (FEA) I have gone thorough in your project description. I have worked on several similar projects. I’m interested in your project. I’m full-time freelancer. I would give you quality work because your sanctification and work quality is my first priority. I’m waiting your message to discuss. Thanks!

Hi, I have great Mechanical Engineering and Civil, Structural engineering and Buidling Architecture Experience I have a master’s degree in Solid Mechanics. I am a Product Specialist with over 6 years work experience. My experience evolves around Mechatronics, Hydraulic actuator, 3D modeling, 3DRenderings and Drawings, FEA, CAD/CAM, Matlab, NX, CFD, AUTOCAD, CATIA, Nastran, Solid works, Product Design, Graphic Design, Fluent ANSYS, and simulation-based numerical optimization. I only take up tasks that I have experience in; I am honest, time conscious and can work under so many conditions. I love challenges as it helps my creativity skills and aids me to showcase my individual tools. All I need from my employer is the project in details and I am set to begin work on it. I always love to meet up with your requirements. I am open for corrections and modification, I am also a peaceful person and my aim is to have a good experience with my employers and create a long term relationship with them. It is however going to be of a great privilege if you can entrust your task in my hands. I promise to give you a great experience working for you.

Hi there . You are expecting me to be able to produce F/D graph using the results and show steps to prove my ability. The reference paper attached provides more details about the project requirements. . I have done extensive research on COMBIN39 elements and the required tools to complete the project. Moreover, I have worked with many similar projects in the past which makes me an experienced person when it comes to bond simulation between concrete and rebar using ANSYS workbench or Mechanical. I believe that I am well capable of delivering what you are looking for..

I am a Mechanical Engineer focused on 3D & 2D modeling, Simulation, Technical Report writing and Stress analysis. Having good skills in mechanical design with CAD software (SolidWorks, FUSION 360, AUTOCAD, ANSYS & ABAQUS). I can handle your project with precision and excellence. I can assure you that I will bring my expertise and dedication to deliver the project on time and to the highest standard quality. With my passion for engineering and problem-solving skills, I am confident that I can provide the results you are looking for. let's talk! We'll start by going over the details of your project.

Hello, I'm interested in your project. Please send me a message so that we can discuss more In your work requires the design you want to Bond simulation between concrete and rebar using ANSYS workbench or Mechanical I'm well versed in all the software work I've done in the past Like: - Autocad, revit, Maya, 3dsMAx, 3d modeling All kinds of work I can do. I will also do the realistic 3d rendering exterior, interior rendering with the high quality. Also we do the 3d home and hose ,home facade design. FINAL FILES :---OBJ, STL FOR PRINTING, FBX, BLENDER FILES, UNITY FILES, ALL COMPATIBLE FILES WILL PEROVIDE AFTER THE END OF THE WORK. I appreciate you when you answer me. Thank you and greetings. Manu

I can reproduce the results in the attached paer and also modify them according to your specifications. Can I work out this one for you?

Hi! Greetings! I am a Mechanical Engineer with expertise in Mechanical Engineering. I have done projects that include the Design of a JIB Crane, the Design of a Base Plate for Steel Columns, the Design of a Pressure Vessel, Design of Transport Tanker, the Design of molds for injection molding, the Design of a Gating System for the Casting Process, Design of a Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Hydraulic brick machine, etc. I am proficient with ASME codes and standards. Given my experience with design projects, I believe I am the right person for this job. I can show you my previous work if you want. I use SolidWorks & PTC Creo for 3D modeling and ANSYS Workbench for FEA. Also, I have done several projects on Computational Fluid Dynamics. Further, I will provide a rich technical report explaining all the results and steps involved in the design. Kindly contact me to discuss this further.

Hello! Your project perfect fit me. If you hire me I can start right away. I am a Ansys expert and have 5 years of experience. My advantage is to keep the credit thoroughly and improve the quality of the assignments follow your suggestion. All clients who have worked with me want to work with me again. I hope lets discuss our project in detail. Thanks!

Hello Dear I am Good user of ANSYS from 7 years. I did many tasks on design and simulation related to structure and fluid. I can do your this project let me know if you are interested. Thanks

- I am an Aeronautical Engineer with 2+ years of experience in designing parts, analyzing parts, designing piping systems, and doing FEA/CFD analysis. - My goal is to provide the best service possible so that you can get the results you need quickly and accurately. I understand that you are looking for someone who can create a bond simulation between concrete and rebar using ANSYS workbench or Mechanical. I am confident that I can provide the necessary skills to complete this project including producing F/D graph using the results. Additionally, I would be happy to show you my steps so that you can get an understanding of how I would carry out this project. If you choose me for this project, you can rest assured that your data will be safe with me as I take precautions to ensure its security at all times. Furthermore, if there are any further questions or requirements you may have for this project, please don't hesitate to reach out to me as I'm more than happy to accommodate any needs you may have. Thank you for considering my bid and I look forward to hearing from you soon!

Dear Customer I can do this model and define bond slippage between bars and concrete in Ansys workbench