Ansys simulation combustion chamber

Hi! First, anyone who promises this in 3 days probably didn't read the instructions, as it requires both the combustion parameters to be right and a CFD analysis of a 3D geometry that will need a complicated fluid mesh. I can do all these things and just finished a graduate-level course in CFD with ANSYS Fluent, plus I have a powerful server with 64 Opteron cores, but it will take even me longer than just 3 days. If you pick me, I'd rather simulate the whole thing from scratch in ANSYS Fluent as SolidWorks's fluid simulation code is not very good. First I'll get a steady-state non-combustive analysis converged, and then connect the analysis to ANSYS Chemkin. Also, I'll help write the report. Thanks and good luck, Caleb

i can do simulations using ansys fluent, CFX, please contact for discuss in detail, i have done similar simulations in the past hope to hear from you soon thanks ashraf shekh design solutions

I am a mechanical engineer and have done many process simulations in Ansys workbench. I can definitely help you with this project, please let me know if you are interested, thank you

Hello, I propose to simulate your project with Comsol multiphysics. since its structure allows to have total control over the equations involved. I guarantee excellent results and a high level of detail in the technical documents. I suggest you check my profile about the FEA projects. I am currently simulating a three-phase motor and a magnetic properties tester of steel sheets, but I have made other projects that include the physics of fluids, change of phases, heat transfer and radiation. one realized in this site is a recuperator of residual heat of photovoltaic panels by means of a thermodynamic process with which through saturated steam transfers the enthalpy to a micro turbine. contact me if you are interested in review some reports of my projects, so you can see the level of detail

A proposal has not yet been provided

Hello, I'd like to apply to your job. I have hands-on experience in civil engineering field, performing advanced CFD analysis using mostly Ansys Fluent, Star CCM+ and other codes. A number of different assignments and engineering experience including Offshore Engineering, Wave and Tidal Energy, Waste to Energy, HVAC, Auto Motive, Infrastructure, Process and Food Industry. I hold a Master's Degree in Engineering Physics and I finished my Ph.D in Combustion Physics at Lund University. Varying with the knowledge in different trades such ad CFD/FEA analysis by using Ansys software and other pre/post processing tools: • ANSYS (FLUENT, MECHANICAL, AIM, SpaceClaim), STAR CCM+, FDS, ANSA ... • Programming skills: Fortran 90/95, 70, MATLAB, C • Multiphase Gas/Liquid, Solid/Gas Reaction Kinetics Modelling • In-house workstation with 20 CPU, (40 threads) and 256 GB RAM Dedicated engineer, that understand deadlines and provides a high quality of work. I look forward to applying my skills and experience to your projects. Best Regards, Fikret Saric

Yes I worked under different combustor's design One was premixed lean, second RQL, third was diffusion. So I know parameters and can help you. Can you describe more detailed about your project. My picture is new lean combustor nozzle without soot disposition on tip I've seen your model you plan to model oil drops vaporisation calculate It us diffussion oil combustor Frankly I do not know Gair and Gfuel mass rate inlet temperature and pressure ratio I can only presume I assume it has pressure ratio about 6..10 temperature on inlet around 500..600K and temperature in outlet about 1200..1300K

A proposal has not yet been provided

Hello I am an aerospace engineer. I have been using ansys for 4 years now. I can easily do this task

hello i am chemical engineer. i have learnt how to design combustion chamber and furnaces. i also know the fuel adjustment and best fuel for it. i also know the different parameters like fuel to air ratio. please do contact me. i will do this.

SOY INGENIERO MECANICO, ESTOY INTERESADO EN EL TEMA, HAGO DISEÑOS EN AUTOCAD, ESPERO CONTAR CON SU FAVORECIMIENTO Y EMPEZAR A TRABAJAR.

A proposal has not yet been provided

Respected Sir, My name is Aditya Gupte. I graduated from Embry Riddle Aeronautical University, Florida with a Master of Science in Aerospace Engineering and started pursuing my Doctorate in Aerospace Engineering from IIT Bombay. During my Masters, I worked with scientists from NASA Glenn Research Center on finding thermo-structural deformations in Scramjet Engines, which helped them in improving the scramjet performance. My doctoral studies further helped me pursue my passion in aerospace engineering and work with collaborating with different people and organizations. This helped me in various achievements such as working with Camera Culture Group, MIT Media Labs on one of healthcare related topics related to sleep disorders in Indians and with Makers Asylum on developing open-source satellite tracking and data acquisition system for universities. One of my recent achievements include developing a drone and Braille pad technology for the blind which will help them navigate indoors and outdoors. It was selected as one of the top 10 innovations in the world and was called for presentation at the World Drone Expo in San Diego, California in 2016. My doctoral research was in studying the internal flow characteristics of synthetic jet using OpenFOAM and high performance computing for unsteady flow analysis. I have a good knowledge in C++ and Python since I have been using it in my research for program