Electrical Engineer - We need to transfer a circuit from HT- into SMD-layout.

Electrical Engineer - We need to transfer a circuit from HT- into SMD-layout. The purpose of the circuit is to collect energy of a small photovoltaic module, which is indoor into a cap. The circuit powers a consumer, when an upper voltage limit of the cap is reached and switch it off, when a lower voltage limit is reached. The expected input currents are in the range of 30-1000µA. Voltage up to 10V. The expected output currents are in the range of 200-1000µA. We developed and tested the circuit in classical HT-technology. We can provide the circuit in eagle format and/or pdf. We would also provide an recommendation/wish-list for most of the SMD-components. The circuit has a total of 10 electrical components. The size of the PCB would be limited to about 25x25mm². We need the layout of the SMD-circuit in eagle format and we need all the necessary documents (e.g. BoM, …) and files to let the circuit be produced by the PCB-manufacturer of our choice. The output of this job should allow us to let the SMD-PCB be produce by [login to view URL] ([login to view URL]). We are open for further recommendations for the PCB-production, but [login to view URL] would be the reference. The time frame for this is 1 week (5 working days). The documentation has to be as complete, that we can proof it using eagle and use it to place the order directly at the manufacturer.