arduino and Twillio code for a nodeMCU board.

I need code written for Arduino IDE for a nodeMCU…to send an SMS message to my Twillio account. Also code for Twillio to take the signal from the board and send a text message to my phone and to my customer’s phones that I can change for any of my customers. I want to have five inputs to a nodeMCU board: Three sensors and two push buttons. Of the three sensors: One counting cycles from a “micro switch”. One counting hours, from a clamp on amp meter sensor, detecting current or no current. Another clamp on amp meter measuring current, and tracking the amperage and recording it on excel or google sheets or something like that. All three must be able to send a message to my cell phone at predetermined threshold amounts set by me, by sending an SMS message to my Twillio account. Two other inputs to the board must be two push buttons, for input to the nodeMCU board, one to be a test, so it counts to one and sends an SMS to my cell and a customer’s cell through my Twillio account. The second button input to the board will just be a reset so I can start without taking the sealed enclosure apart. I need to measure up to 100 amps with a (SCT013) clamp on amp meter input and back it down to 0-5 volts for the nodeMCU board to read, maybe 0-3.5 volts. Using two of these clamp on amp meters I want one to just detect current or no current as an input for an hour meter. For the hour meter it needs to count time when it sees any flow, and nothing at 0... The second clamp on current sensor is to track the amperage and record it on, excel or google sheets or something like that.