Find Jobs
Hire Freelancers

HVAC Calculations

$8-15 USD / hour

Closed
Posted over 1 year ago

$8-15 USD / hour

I will give you a cad model and you will give me HVAC advice.
Project ID: 35448157

About the project

28 proposals
Remote project
Active 1 yr ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
28 freelancers are bidding on average $20 USD/hour for this job
User Avatar
Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.
$20 USD in 40 days
4.8 (83 reviews)
7.2
7.2
User Avatar
Hi There, I am a mechanical engineer with expertise in Design FEA and CFD. I can do HVAC simulations for optimization of design. Please initiate the chat to discuss it further. Thanks, Ishwar
$12 USD in 40 days
5.0 (71 reviews)
6.1
6.1
User Avatar
I am HVAC designer and analyst I can provide advice on HVAC Calculations Please share details of work
$12 USD in 40 days
4.5 (54 reviews)
6.3
6.3
User Avatar
Hi, There. Very glad to place bid on your project. I have read your project descriptions carefully. As I'm Solidworks(2021&2022), Fusion 360 expert, I have many experience with HVAC. If you are hire me, your project will be complete very quickly with better quality. Thanks for your review. Regards.
$15 USD in 40 days
4.7 (27 reviews)
5.5
5.5
User Avatar
Mechanical Engineer Expert in HVAC system & MEP Hi there, I will do this project according to ASHRAE & SMACNA Standards & Codes, NFPA and IPC. I would share previous work and samples with you. I would give high quality work and results. I’m professional mechanical engineer expert in HVAC systems Design & Drawings, BOQ, Hydraulic Calculations, Water and air cool chillers, central air conditioning system, maintenance, commissioning of all types HVAC units like chillers, AHU, FCU, VRF, VRV, AHU, FAHU, RTU, diffuser, Cassette etc, in domestic, residential and commercial buildings with professional engineer team. I have gone thorough in your project description. I have worked on several similar projects. I’m interested in your project. I’m full-time freelancer. I would give you quality work because your sanctification and work quality is my first priority. I’m waiting your message to discuss. Thanks!
$12 USD in 40 days
4.7 (30 reviews)
5.0
5.0
User Avatar
Hello dear I am Mohamed Experienced HVAC Engineer I read your project description and I can make this project perfectly for you I can help you in HVAC design with all calculations,drawings,advices,... I have more than 6 years experience in HVAC Filed Please send me a message to discuss the details Please check my portfolio and Reviews Thanks
$12 USD in 40 days
5.0 (22 reviews)
4.7
4.7
User Avatar
Hello you. I just read your project and very excited about it. I am HVAC engineer, if i can help you any thing please contact with me to discuss more. Thanks for watching my bid.
$12 USD in 40 days
4.7 (3 reviews)
2.4
2.4
User Avatar
Dear Client, Being a Mechanical Design engineer, I have already carried out projects in this domain, in my previous project, was required to provide the positioning of HVAC system in the Plant layout, i can show you my previous work, having in deep knowledge of HVAC system, let me know in the chat if interested. Best Regards
$10 USD in 40 days
5.0 (2 reviews)
1.5
1.5
User Avatar
Hi, I am a chartered mechanical engineer with 7 years of experience in prototype design, manufacturing and testing. I have previously worked of several industrial scale HVAC systems and heated piping for material transfer. I am confident in meeting your requirements if given the opportunity.
$10 USD in 40 days
5.0 (1 review)
0.6
0.6
User Avatar
Hi, there. My major is Fluid mechanics. So I can give you a good result.
$25 USD in 25 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello dear, I'm a designer and mechanical engineer I can help you, I have been using solidworks and autocad for 7 years. All my work is of high quality.
$8 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
We are a group of 3 MEP engineers and we work for US, UK, Canada and middle east projects: Here is a list of what we can deliver: 1- Heat Load Calculation using HAP. 2- Power, Lighting, Low Current Permit & Design Drawings including Panel Board & Riser Diagrams. 3- Calculation of Static Pressure for Pump, AHU, Fans, etc. 4- HVAC, Fire Fighting, Public Health Design and Shop Drawing using dynamic blocks which will speed up the work. 5 Full Mechanical Report for a whole project. 6- Hydraulic Calculation for Fire, plumbing or hydronic piping using. 8- Pipe Profile for Infrastructure Utilities including Storm, Sewage or Pressure Pipes. Software We Used: We use HAP for heat load calculations. Our models are created using Revit MEP for BIM. We are also proficient at Revit MEP family creation. We also use Autodesk Navisworks to perform interference analysis checks to validate our models and to ensure optimum layout efficiency. This is in brief about my work. Thanks for your time & consideration Regards Mohd Faizan
$8 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am mechanical design engineer in building HVAC systems. My daily duties are in all this systems. I have enough experience to manage every kind of issue
$12 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello. I read about your project carefully. I'm sure I can do your task. I'm an expert in CAD and HVAC. If you hire me, I 'll do my best to do your task. I'll wait your reply. Regard.
$12 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I am a Mechanical/HVAC engineer. I work daily with HVAC engineering design for California projects in the US. I can asses your CAD models and provide you with HVAC design Advice. If it’s the intent to have full HVAC full design scope, I can also consider it as part of the job . Load calculations, energy analysis and or ducting layout and equipment sizing with CAD schedules as appropriate using the local applicable mechanical and energy codes . Thanks for the opportunity if so. Armando H.
$20 USD in 20 days
0.0 (0 reviews)
0.0
0.0
User Avatar
its my favorite job i can give you god results i am professional in this type of jobs i can do it fast
$8 USD in 50 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello, I can do this task accurately and quickly. I have the necessary skill to complete it perfectly. I am a professional in calculating thermal loads, choosing the device, and making shop drawing for the project. I have experience in designing and implementing air conditioning projects.
$12 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello Sir, I can help you, I have extensive experience as a mechanical MEP design engineer (Technical office) at construction company, so You will get accurate Load calculations Report & designing for the HVAC Systems Using carrier software carrier builder include ShopDrawings. ------------------------------------------------------------ (also if you need)You will get shop drawings with all details needed to execute the project ,the Shop drawings in fully editable ,scalable and organized layers in Autocad and PDF Ready to print & Ready to Stamp from your consultant, Designing approximately in the areas as indicated on the arc drawing and arrangement of the pipes and ducts for suite structural as well as coordinate with work of other trades, you will get all engineering documents like installation details, sections, composite plane, etc . I have done similar to your job in real life as will as on several of freelancing websites working for long years in MEP, Hvac, Fire Sprinklers & Fire Alarm Projects, like buildings, Stores, Hospitals, GYM, Gas station, ...etc. I am familiar with your city code -Fast return -Supporting till getting approval from your engineers consultant/landlord to avoid any comments. -Supporting during the time of installations for any advice needed till project done in real. I can assist your engineering firm. Thank You
$20 USD in 40 days
5.0 (1 review)
0.0
0.0
User Avatar
I am mechanical engineer with more than 5 years experience in designing HVAC system using HAP application
$8 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have years of experience on enginnering i i have been working on difficult project before. I can provide you load calculations if you want to.
$12 USD in 40 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Brooklyn, United States
5.0
46
Payment method verified
Member since Jun 12, 2012

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.