Software & Hardware Design of a Power Supervision System

Cancelled Posted Jul 18, 2013 Paid on delivery
Cancelled Paid on delivery

In need of electronic engineering (Software & Hardware) help to make a small Power Supervision System (PSS)

The job is:

a) To make a simple Power Supervision System based on a PIC processor circuitry, including hardware schematics, embedded PIC software, related PC software and full documentation. For details please see attached paper.

b) Providing detailed and full drawn schematics in Altium (Protel) DXP Rev 7.2 format and a full Bill of Material including a minimum of 2 suppliers.

c) Make the program for the PIC processor (PIC18F25K50) to operate the PSS with the functions as described in the attached paper. Functional changes and suggestions are welcome, but must be accepted in writing by us, before implementation.

d) Make a small PC program (Windows XP and Windows 7 operational) which can 1) receive and log the health beat information received from the PSS, 2) provide the communication and setup capability of the PSS and 3) provide a small graphic display on the PC with the actual and accumulated AHr use.

e) The source code and documentation, with detailed annotation in English, are to be supplied as part of the job. After full payment the IP belongs to us.

f) To provide a written description in Words of the setup, operation and maintenance of the PSS.

g) We will make a functional hardware proto-type based on the provided Altium (Protel) schematic, when final version is presented.

h) Low power consumption of the PSS is required, due to operation from a Battery.

i) To design and implement communication from a remote processor to the PSS via USB.

j) The setup of the PSS – where needed – must be performed from the PC program via the USB connection.

k) Budget: The PSS’s component cost must be kept as low as possible. Simple solutions and low price components are preferred over complex solutions or expensive components, where this can be done without compromising the quality and reliability.

l) Providing options to the requested functions, if this can improve operation, lower production cost and/or improve quality.

m) The Software language used to solve the project must be provided in the bid.

All communication and documentation are to be in English.

The document describing the requirement for the PSS is to be followed. If any inconsistencies or conflicts are identified these must be brought forward as well as any and all suggestions for improvement are welcome.

C Programming Electronics Embedded Software Engineering Microcontroller

Project ID: #4739259

About the project

17 proposals Remote project Active Aug 15, 2013

17 freelancers are bidding on average $1828 for this job

MikroStar

hi, i am an electrical engineer and an embedded system designer. i can help you with this project.

$4500 USD in 75 days
(63 Reviews)
7.7
quang102

hello i can do this thanks

$1444 USD in 30 days
(32 Reviews)
6.4
Davelelievre

Hi I may be able to help with your project

$2777 USD in 45 days
(23 Reviews)
6.2
bbk

I can make your project.

$1111 USD in 3 days
(20 Reviews)
5.2
zeshannaseer

Hi Professional here.

$1555 USD in 25 days
(13 Reviews)
4.7
ddjuric

We are team of high skilled professionals. Please check your inbox for more details.

$1444 USD in 30 days
(4 Reviews)
4.4
waqasshafique

Hi, I have 4 years of professional experience in designing embedded systems, plz see the PMB

$800 USD in 21 days
(13 Reviews)
4.4
obervic

I can implement this project.

$1500 USD in 40 days
(7 Reviews)
4.6
ENGKAM

Hi, I can handle it all

$3500 USD in 21 days
(3 Reviews)
3.8
vikramkadiaan

Hi have 9 years of experience in microcontroller and expert in PIC microcontroller . Can design from MCU part to the front end application end . Please discuss we can make it better.

$888 USD in 3 days
(3 Reviews)
3.1
ulogix21

hi, please check the PM...

$1333 USD in 45 days
(1 Review)
2.8
WorXpace

We have done many PIC projects in the past including several power management system for Solar-Gem. We have our own PIC24 reference design that we would use. All programming of the PIC will be in C. Windows PC program More

$2000 USD in 10 days
(1 Review)
1.9
pak0079

I can do that.

$1111 USD in 30 days
(2 Reviews)
1.2
wping1234

i have worked for 12 years in sensor processing and industry control. hope we can work together.

$3555 USD in 60 days
(0 Reviews)
0.0
Aresko

hello No problem, I can do this project.

$1444 USD in 40 days
(0 Reviews)
0.0
MarkoLukic

We are a group of 3 engineers, we have good support and reference we have to do it quality. We worked on a lot of similar projects. See PM.

$1111 USD in 3 days
(0 Reviews)
0.0