Find Jobs
Hire Freelancers

Create a AUTOCAD electrical drawing

$30-250 USD

Closed
Posted over 5 years ago

$30-250 USD

Paid on delivery
Create harness for cables from Field to Control [login to view URL] protection circuits if needed. ( 5-7 sensors for Pneumatic butterfly valves, Few level sensors and few temp sensors) Create harness for AC or DC cables for Analog sensors from field to control cabinet( single phase 5 pumps 1/2 - 1 HP centrifugal pumps Assist in sourcing Sensors and pumps for the application Rockwell Contrologix PLC and IO familiarity. All the harnesses and drops will ultimately terminate in the MAIN PLC cabinet that has all the IO to control the sensors, pumps etc. USA standards and NEC standards knowledge is MUST Client has preferred ( Power supply, Circuit breakers etc ) [login to view URL] the wiring of sensors in the FIELD to the DROPs to the MAIN CONTROL PANEL is the job scope Total sensors: 15-20
Project ID: 17603868

About the project

20 proposals
Remote project
Active 6 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
20 freelancers are bidding on average $200 USD for this job
User Avatar
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
$333 USD in 3 days
5.0 (34 reviews)
7.2
7.2
User Avatar
I am Electrical Engineer with six years of experience in Residential, Commercial and Oil&Gas Projects. I have very good skills with Autocad. I have experience drafting One line diagram, three line diagram, Lighting layouts, Power layouts, raceways layouts, Schematic Control. I have knowledge with US Code NEC, IEEE. I believe I can help you. Regards
$250 USD in 10 days
5.0 (8 reviews)
5.5
5.5
User Avatar
I have 19 years electrical design experience and have work at Rockwell and understand there parts and the NEC thoroughly.
$222 USD in 3 days
4.7 (8 reviews)
5.0
5.0
User Avatar
AUTOCAD electrical drawing I am a Pro Architect & Interior Designer. I will do a perfect AUTOCAD electrical drawing. I have done many Designs in past Hello Sir, Greetings! I provide professional Architecture interior Landscape Design Drawing Modelling Rendering. I focus on Quality rather than Quantity. I hold a Bachelor of Architecture degree. I’ve carefully gone through your job posting. PLEASE CHAT WITH ME FOR SAMPLE WORK REVIEW. I HAVE DID 500+ 2D /3D Architecture interior Landscape DESIGN PROJECTS WORK IN PAST including UK/US/Aus project. I CAN PROVIDE YOU MUCH GREAT QUALITY WORK THEN ANY TOP BIDDERS ART LAND/ ARCHVISION3D. You are the reason for my existence and prosperity, and therefore, I am dedicated to fulfilling your requirements. a simple 'Hello' may lead to a life-long professional relationship. :) Best regard Neel bose
$30 USD in 5 days
4.1 (55 reviews)
5.5
5.5
User Avatar
Hi, I have gone through your requirement of AUTOCAD electrical drawing I’m a part of F SIX Solutions which is a trusted Name in India and an Outsourcing Partner of Choice for Global Engineering Houses from last 6 yr. F SIX provides Design and Drafting services across countries such as USA, UK, Canada, Australia, gulf. we support the following Architecture & BIM Services: Our Expertise: 1. We have Developed schematic level and detailed models based upon libraries of parametric or solid objects which include structure, interior and exterior architectural elements, and building systems like mechanical, electrical and plumbing systems. 2. Performed Model Based Quantity Takeoff and Costing. Integrate BIM with cost database to automate model based costing process using tools like Vico, Innovaya 3. We have developed high end renderings and walk through of 3D and 4D BIM for the purpose of pursuit of new work (proposals), construction site logistics visualization. 4. Produced dimensioned drawings for layout and pre-fabrication from the models. 5. Prepared Shop Drawing level 3D models such as concrete forms and wall frame detailing for use by DPR crews or subcontractors. Let's discuss your requirement in detail before giving the final quote. Best Regards Akhil
$250 USD in 3 days
5.0 (1 review)
2.8
2.8
User Avatar
Hello, Hope this finds you well. I need to know if you need all of the work to be done via AutoCAD only? Best, Ahmed
$277 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Please share the scope of works, will study the requirements and inform the contacts to coordinate with, hope i would close the project in time, Thanks, Robin
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I would like to apply for the position you posted on online. I am an retired Instrumentation and Controls Engineer. I have 30 years experience designing instrumentation and control systems for an aerospace company's R&D Systems and Structures Test Lab. Bachelors Degree in Computer Science. Engineered data acquisition and control systems, test and measurement equipment, signal conditioning, telecommunications, telemetry, and flight test systems. Custom design and modifications of software and hardware. Arduino, Raspberry Pi and PIC microcontrollers. High speed video, lighting controls and audio design. Lab View, C++, DasyLab, Excel VBA and Visual Basic PCB layout with PCB Artist, Eagle, Kicad and UltiBoard. Experienced AutoCAD, SolidWorks, Sketchup and MicroStation user. Schematic and PCB design of electronic instrumentation. Perform spice simulation with Pspice, LTspice and Multisim. Experience in test control, data acquisition and robotics. Strain Gages, Thermocouples, RTDs and Accelerometers. Good working knowledge of machining, adhesives, materials, MIL/AN specs. Environmental testing, geometric dimensioning and tolerance per ANSI Y14.5. Experience in hardware troubleshooting, sensor design and system design. Control panel and Motor Control Center design, PLC programming. Variable frequency drives, DC drives, and AC motors. Factory automation and industrial controls. National Instruments, Baldor, Koyo, AB, Automation Direct. Thank you for time and consideration.
$555 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have more than 25 years of experience working as `Senior Electrical Designer' with French oil company Total ABK in Abu Dhabi UAE. Now I am retired, so I am always available to work for you. I have lot of experience designing such control panels having PLCs from Honeywell, Triconex, Schneider etc.
$55 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
If you choose me i will do my best. Arguments that will convince you : - 3 years of experience in project like this, - I have done projects for 15 companies like : Danone, Bulten, Ikea, - I am working as projec leader engineer for 3 years, - And I know european and american law and norms which are valid in industry.
$200 USD in 4 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Good Afternoon, I’m thrilled to be writing to you today regarding the vacant position that you posted recently. As a motivated and knowledgeable individual, I would like to take the opportunity to apply. I have several experiences in PLC and networking. I acquired some good experience in Cold Mill steel production. I have an experience in safety rated projects for industrial applications. I have worked on upgrading Galv1 welder by changing the code from GE-90-30 to TMEIC controller. I am also responsible to determine the new I/O cards for the welder upgrade and making new drawings. Designed and built a complete TMEIC test station, including I/O’s cards, HMI server, TC_net card, Profibus card, and PLC unit. Currently, I am working for Honda Engineering North America. Below I will mention my duties and achievements in the company: • Generated hardwire schematics, assembly, layout and cable drawings using Autocad. • Developed software for PLC, HMI, Servo, camera and other control devices. • Presented, explained and justified design within a technical review. • Produced parts list and generated parts order requisitions. • Followed-up design for possible issues in manufacturing and mass production. Sincerely, Amr Ahmed B.C Electrical Engineering, M.S Electrical and Computer Engineering
$155 USD in 3 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have over ten years experience in industrial controls design and documentation in various software packages. I have been the primary designer on projects with 100's of I/O and including drives, motors, and robots. I have worked in ANSI and IEC standards for drafting and labelling and have been exposed to a broad range of customer standards. I am quick to adapt to project specific requirements and specifications. I have worked with ControlLogix, MicroLogix, CompactLogix and GuardLogix system as well as PointIO and FlexIO modular expansions. I have integrated PowerFlex & Kinetix drives into solutions as well as safety controllers, networking devices, etc. Part of the documentation scope would include material lists. Please contact me for further discussion. I am based in Jamaica, in your time zone and am a native English speaker. My experience to automation was gained in the automotive industry in South Africa. I have allowed extra time in my bid to accommodate unforeseen conditions - this may be revised in discussion of the scope. Thank you for considering my bid.
$200 USD in 14 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Raleigh, United States
4.9
62
Payment method verified
Member since Sep 28, 2012

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.