PLC Jobs

We are seeking an experienced industrial controls engineer or automation contractor to support the control system design for modular hydrogen production and fueling systems. The scope includes developing the control architecture for systems incorporating electrolyzers, purification (PSA), compression, storage, and dispensing equipment. The contractor will be responsible for preparing control philosophies, functional design specifications, I/O lists, cause-and-effect matrices, and PLC/HMI logic required to safely and efficiently operate hydrogen systems in industrial environments. Experience with process controls, gas handling systems, and hazardous-area instrumentation is strongly preferred. The role will involve working alongside our engineering team to translate process and mechanical d...

Hydraulic system I am building a device that is based on controlled resistance in A SWINGING MOTION. The device has a swinging arm, swinging back and forth, like a golf swing, a tennis shot or a baseball hit. I want to create the resistance by moving oil from one side to the other side of a double rod small cylinder, through a controlled size orifice. I tested it and it works well and very smooth. I have already done the mechanical design converting the rotational motion to a linear motion and it’s in production already. We must cater for a right-handed and a left-handed swing. There will be 2 models. The one is totally manual and the other electronically controlled by a proportional flow control valve driven by a PLC operated by a UI. The manual unit is simple for me to build usi...

I'm seeking a skilled developer to create PLC software aimed at automating manufacturing equipment, specifically for assembly operations. Key Requirements: - Control and automate machinery used in assembly processes. - Interface for process monitoring. - Data logging and reporting capabilities. Ideal Skills and Experience: - Proficiency in PLC programming. - Experience with manufacturing automation. - Knowledge of data logging systems. - Strong problem-solving skills and attention to detail. Looking forward to your expertise in streamlining our assembly operations.

We have a requirement for a Beckhoff Automation PLC programmer to support our ongoing project. The scope of work includes: • Accessing the existing PLC system • Downloading the current program from the PLC • Verifying and backing up the existing logic • Providing necessary support for further modifications Kindly confirm the availability of a suitable programmer at the earliest. If you have recent TwinCAT 3 manufacturing projects and can start within the next two weeks, let’s discuss the details.

Our processing line needs a reliable counting routine, written in CODESYS, that records the exact number of chickens immediately after slaughtering. At the moment that figure is taken manually and is rarely accurate; I want the PLC to take over so the plant can trace throughput in real-time and feed the data to our existing SCADA screen. The job is focused on one task only: IFM based system to count poultry legs and report daily a total amount of processed birds entering the system. * Sensor to be mounted within the main running line of the Auto cut line positioned post hang on (left of the green personal) * 2 counts to equal 1 bird count * IP rating to be 68 or above for hygiene washdown areas * System to be able to be reset every day via a button that operators can reset * Wiring to be ...

أرغب في بناء لوحة تحكم جديدة تماماً لمزرعة الدواجن، يعتمد تشغيلها على PLC ويشمل واجهة-مستخدم تُعرض على شاشة لمس داخل الحقل. أهم ما أحتاجه في البرنامج هو: • ضبط آلي ودقيق لدرجة الحرارة مع التحكم في معدلات الرطوبة داخل العنابر. • إدارة دورية لعمليات تغذية الدواجن حسب الجداول التي أحددها مع إمكانية تعديلها بسهولة من الواجهة. • تجميع قراءات المستشعرات المتعلقة بصحة القطيع وعرض التنبيهات الفورية عند اكتشاف أي انحراف عن القيم المسموح بها. أُفضّل أن يكون الكود واضحاً ومُعلَّقاً بحيث أستطيع متابعة أي تغيير مستقبلي، مع فصل الوظائف الثلاث السابقة في وحدات منطقية لسهولة الصيانة. بعد الانتهاء أحتاج ملف المشروع الأصلي، نُسخة قابلة للتحميل على الـPLC، وشرحاً سريعاً يوضح خطوات الضبط الأولي وتشغيل اللوحة.

I need bespoke code that lets my Variable Frequency Drive run an induction motor strictly in torque-control mode. The goal is smooth, accurate torque delivery across the full speed range, with rapid response to load changes and minimal overshoot. The hardware is an induction motor paired with a modern, field-bus-ready VFD; if you normally work with Modbus, CANopen or direct PLC integration that is a plus. I am open to your preferred language or environment—whether it is ladder logic in the drive’s own editor, structured text via IEC 61131-3, or an embedded C solution—so long as the final program can be flashed and tuned in the standard vendor software. Please highlight your experience with similar torque-controlled applications when you reply. I am especially intere...

The project centres on B&R Automation Studio. I have several motion- and process-oriented machines that need a cohesive PLC solution plus a reliable virtual twin. Scope • Two tracks of work will run in parallel. Brand-new code is required for upcoming equipment, while certain legacy projects need refactoring and feature extensions. • Core functionality is machine control, covering precise motion sequences as well as temperature, pressure and safety-related process loops. • A full simulation must be built with Industrial Physics inside Automation Studio so we can test every axis, sensor and interlock before commissioning. What I will provide – Hardware I/O lists, existing project archives where available, and functional descriptions for each machine &nda...

I have a running PLC setup that now needs to speak fluently with our SCADA layer so we can capture live plant data and visualize it in real time. The focus here is pure system integration—no new ladder logic unless it helps the hand-shake. Scope • Map the necessary PLC tags to the SCADA database and confirm reliable read/write. • Configure the communications driver (OPC UA, Modbus TCP, or Ethernet/IP—whichever matches the PLC you’re most comfortable with) and document every step. • Build a small proof-of-concept screen in the SCADA environment showing live values, alarms, and a trending chart; this will serve as our acceptance test for data acquisition and monitoring. I will provide remote access to the PLC, the SCADA development license, and a list of re...