Construction Jobs

I need a Professional Engineer (PE) to provide structural design services and stamp for an existing Office ADU (Accessory Dwelling Unit). Key requirements: - Structural design for an existing structure - Analysis of load-bearing capacity and wind load Ideal Skills and Experience: - Licensed Professional Engineer - Experience with ADU structural design - Knowledge of load-bearing and wind load analysis Please ensure all work complies with local building codes and regulations.

I need professional assistance to stamp structural plans for an in-ground fiberglass pool. Requirements: - Stamping of plans must be done by a licensed professional. - The focus is solely on the pool shell. Ideal Skills & Experience: - Experience with in-ground fiberglass pool designs - Knowledge of local building codes and regulations - Licensed engineer or architect Please provide your credentials and relevant experience.

I'm seeking an experienced renovation specialist to create floor plans for my clients space. The project involves both structural and cosmetic work, and requires: - New flooring throughout - Installation of new fixtures - Layout redesign for improved space utilization Ideal candidates should have: - Proven track record in home renovations - Strong design and project management skills - Ability to handle both structural and cosmetic changes Please provide a portfolio with relevant experience and a detailed quote.

I need an experienced installer to drill into my concrete ceiling and mount a series of heavy-duty hooks that will each safely support more than 200 lbs. I plan to hang at least three hammocks, so you will be setting multiple anchor points and spacing them to avoid interference once they are in use. Scope of work • Evaluate the ceiling for optimal anchor placement and mark drilling points. • Supply or recommend commercial-grade concrete anchors and swivel hooks rated above 200 lbs. • Core-drill, set the anchors with epoxy or expansion bolts, and torque to specification. • Clean up dust, fit the hooks, and demonstrate that every point can take load without movement. Acceptance criteria • All hooks hold 200 lbs+ in a static test without visible deflection...

I require a licensed structural engineer to review, stamp, and provide engineering for the foundation and framing of my single-family house plans. Requirements: - Review and stamp existing detailed plans - Engineering services for foundation and framing Ideal Skills and Experience: - Professional structural engineering license - Experience with residential construction projects - Ability to work with detailed plans and provide necessary adjustments

I'm looking for a skilled woodworker to create a large, over 5 feet, wooden display shelf for retail sales. Key Requirements: - The shelf should be sturdy and designed to hold various retail items securely. - We have the design measurements to fit the products as needed. - We have built one, but looking for 10-15 more, and do not have the time to make them ourselves. Ideal Skills and Experience: - Proficiency in woodworking and carpentry - Experience in designing and building retail display furniture - Attention to detail and craftsmanship - Ability to work with different types of wood and styles

I need a quantity surveyor - engineer who lives and breathes construction to build a suite of Excel workbooks completely from scratch. These files must let me: • Prepare detailed estimating sheets that roll into a clean, client-ready quote. • Track project progress, variations and key dates as a live project-management dashboard. • Generate daily site reports, monthly summaries and forward-looking cash-flow reports at the click of a button. • Monitor incoming and outgoing payments so I can see our real-time financial position. The final spreadsheets have to be intuitive for site staff yet robust enough for head-office reporting. Smart use of formulas, named ranges, drop-downs and conditional formatting is expected; VBA or Power Query is welcome if it keeps routi...

Bid Manager Needed – Solar & Renewable Energy Tenders Europe We are a Lithuanian-registered construction and solar PV installation company looking for an experienced Bid Manager to identify and manage tender opportunities across Europe. What you will do: Search and monitor tender platforms (TED, TendersOnTime, Globaltenders) Identify relevant solar/photovoltaic installation tenders across Europe Prepare and submit complete bid documentation (technical + financial offer) Manage DUAE and qualification documents Communicate with contracting authorities when needed What we need from you: Proven experience in EU public tenders – construction or renewable energy sector Knowledge of EU procurement CPV codes for solar and renewable energy Fluent English – German or other E...

Liaocheng Jinyuyuan Metal Products Co., Ltd. is ready to widen its footprint beyond China and secure new partners for our threaded rebar couplers, one-touch couplers, grouted sleeves, precast concrete accessories, and related connection equipment. The immediate objective is to build a verified database of potential buyers in the USA, UK, and UAE who actively purchase construction hardware for office buildings, bridges, or precast systems. Your assignment is to locate and document decision-level contacts at importers, distributors, contractors, or construction firms that fit this profile and can benefit from our high-strength, competitively priced products. Deliverable • A spreadsheet (Excel or Google Sheet) containing for each qualified lead: – Company name – D...

I need blueprints created for a mobile coffee van that adhere to Pima County Health standards.

I need a structural design for a covered patio in Perth, Western Australia, for council approvals. The primary purpose of this patio is to serve as a relaxation space. Key requirements: - The design must be for a covered patio - The structure should primarily use metal as the material Ideal Skills and Experience: - Expertise in structural design - Experience with metal materials - Knowledge of local building regulations in Perth - Ability to create designs suitable for relaxation spaces

I need a seasoned tender writer to prepare the full submission package for a UK council project: removal of an aging 450 m² flat roof and installation of a new system. The council’s return date is 24 April, so I must have a polished, compliant document ready for upload several days prior. What the tender must include • A clear project timeline with interim milestones that demonstrate we can strip, prep and re-roof within the council’s programme. • A cost breakdown that shows labour, plant, scaffold, waste disposal, and the specified roofing system as separate line items, with any optional warranties or maintenance priced visibly. • A section detailing our experience and qualifications, backed by three relevant public-sector roof projects completed in ...

I need a Kawneer storefront system installed, including storefront framing and aluminum swing doors. Requirements: - Supply and install storefront framing and aluminum swing doors. - Must have experience with Kawneer systems. - Ensure proper fitting and durability. Ideal Skills and Experience: - Expertise in commercial door and storefront installation. - Familiarity with aluminum materials. - Strong attention to detail and craftsmanship.

Please add construction into the logo. You can redesign the entire logo if you want • A refined icon or visual motif that nods to • Space to explore colour—feel free to present bold, neutral, or monochrome options; I’ll decide once I see how each supports the new look File requirements • Editable vector source (AI/SVG) • High-resolution PNGs with transparent background • Horizontal, stacked, and single-colour variations I’ll provide quick feedback, and once we land on the winning direction I’d like final files delivered within a week. If you have recent construction or industrial logo work in your portfolio, all the better—send a couple of examples when you submit.

Pay: $30.00 - $50.00 per hour Job description: We are looking for someone local to the Houston / Conroe area to lead a short-term due diligence process for a real estate project. This is a 6–8 week contract focused on one thing: figuring out whether a property is actually viable for development. You will be the person on the ground making calls, meeting people, and getting real answers. This is not a desk job. What You’ll Be Doing Find and coordinate the right local professionals, including: Real estate attorney Land surveyor Civil engineer Septic / wastewater specialist Other relevant consultants as needed Evaluate the property by helping answer questions like: Is there sufficient water access? Can septic support the intended use, or is sewer required? What are the soil...

We are an architecture and interior design firm based in Delhi, currently handling multiple residential and commercial projects. We are looking for reliable working drawing support on an ongoing basis. Scope of work includes preparation of detailed architectural and interior working drawings such as layout plans, elevations, sections, joinery details, and coordination drawings as per provided design inputs. The candidate/team should be proficient in AutoCAD, with a strong understanding of execution-level detailing and site coordination requirements. This is a long-term collaboration opportunity with consistent workflow, requiring adherence to timelines, drawing standards, and the ability to handle multiple projects simultaneously.

I’m looking for a competent rigger to support upcoming site work that involves moving and securing heavy components. The core of the assignment is pure rigging—selecting the right lifting gear, slings, shackles and hoists, then safely positioning the load and checking stability once it is in place. Although the focus is rigging, being comfortable with light grinding and welding will be a plus; around half of the job may call for touch-ups on edges or quick tacks to hold brackets before the main welders step in. If you can handle a grinder and perform straightforward MIG or stick passes, let me know in your bid. Site safety is non-negotiable. I will expect you to come prepared with your own PPE, demonstrate correct hand-signal communication with the crane operator, and fol...

I need a skilled handyman or carpenter to tackle a few home-maintenance tasks in one visit. First, the side panel of my kitchen cabinet has suffered water damage; it is made of particle board and will need to be removed and replaced with a matching, finished piece that blends seamlessly with the rest of the cabinet. Please supply the new board, cut it precisely, secure it, and leave the surface ready for paint or stain if required. While you are here, I have a new vanity light that needs to be mounted above the bathroom mirror. Wiring is already in place—your job is to remove the old fixture, confirm safe connections, install the new unit, and test that it works properly. Finally, I’d like fresh caulk run along the kitchen counters as well as around the sink to give a clean, ...

I have commercial construction drawings for a project that were already signed and sealed from Jacobs Engineering. The permitting department for the city is subcontracted from Jacobs which creates a conflict of interest. I need an independent PE to sign and seal the drawings. The project is for a concrete pad and a metal canopy structure in a water treatment plant.

I need a construction layout survey. The survey should be detailed, with accurate measurements. Key requirements: - Construction layout - Detailed layout with measurements Ideal skills and experience: - Experience with construction layout surveys - Proficiency in surveying tools and software - Attention to detail and accuracy

I am ready to move a civil structure into construction and now need complete shop drawings for its slab-on-grade foundation. The architectural plans and structural design notes are already locked, so what I’m looking for is a set of fabrication-level drawings that a contractor can use without further clarification. The scope is limited strictly to the foundation—no framing or roofing at this stage. I will supply the PDF/ DWG background files, design criteria, and soil report as soon as we start. From you, I expect fully detailed plans, sections, reinforcement schedules, pier and edge thickening details, embed and anchor layouts, plus concise notes that reference the relevant code provisions. Deliverables (all in metric): • PDF sheets ready for issue to site &bul...

I need a structural engineer to design an LVL beam to support the second floor and replace the existing load-bearing wall that is 24’. The wall is adjacent to the living room, kitchen, and dining room on the main floor. The area measures 24 feet long and 20 feet wide. The joists are 2x8, spaced 16 inches on centre, perpendicular to the load-bearing wall, and are 12 feet long on one side and 8 feet on the other. The roof of the second floor is framed with trusses that transfer the load to the exterior walls, so none of the interior walls on the second floor are load-bearing. The main floor is supported by joists of the same size and a steel beam in the basement, which rests on the concrete foundation at one end, a steel post in the centre, and a 4-ply 2x4 post at the other end. Re...

I am an 80-year-old architect seeking an experienced draftsman to assist with residential building plans. We work in AutoCAD 2021. Key requirements: - Create construction-ready plans - Proficiency in AutoCAD 2021 - Experience in residential projects Ideal candidate should have a strong attention to detail and the ability to work independently. Good verbal communication skills for phone consultation is first project involves getting revised drawings from Model Space to Titled drawings/Printing, to scale.

Create a dynamic Excel workbook tailored for the South African market, using SI units (m, kN, MPa), to design and analyse reinforced concrete T-beams. Scope: Reinforced concrete T-beam design and analysis (including shear stress, bending, reinforcement requirements, etc.) Compliance with relevant South African design standards (e.g. SANS codes / Eurocode where applicable) Workbook requirements: Fully linked formulas across structured sheets Clear separation of inputs, assumptions, and calculated outputs Detailed design tables for reinforcement (flexural and shear), section properties, and load effects Automated calculations with minimal manual input Embedded tables and charts for visualisation and validation User-friendly layout with clear labels and guidance Additional requirement: ...

I’m working on a class project in Revit and keep getting stuck when it comes to structural modeling—especially placing and adjusting beams and columns so they behave correctly in different views and schedules. I’d like someone who can jump into my existing file, spot what I’m doing wrong, and then walk me through the right workflow so I understand the “why” as well as the “how.” Ideally, we’ll screen-share while you demonstrate best-practice beam and column creation, proper family selection, and alignment/connection techniques. I’m using the current Revit desktop release, so please be comfortable with its interface and structural tools. Deliverables I’m looking for: • A cleaned-up version of my Revit file with corre...

I require a concise Bill of Quantities that covers the groundwork, formwork and concrete work for a handful of footings and their associated excavation. All measurement must follow the ANZSS rules and the take-off has to be completed directly in CostX. Scope The drawings are ready and the package is small, limited to excavation, footing concrete, reinforcement, formwork and any incidental items that ANZSS requires to be shown. No other trades are involved. If you are comfortable working in CostX under ANZSS and can meet the two-day window, this should be a straightforward assignment.

I need a drawings for a 15x20 detached storage structure primarily for tools and equipment. The structure should include: - carriage doors Ideal Skills and Experience: - Experience in building detached structures - Knowledge of shelving installation - Ability to ensure durability and security for storage purposes Please provide examples of similar work done.

I'm looking for a skilled renovation team to transform my entire apartment into a modern/boho haven. The renovation includes: - Kitchen: Modern appliances, boho accents - Bathroom: Spa-like, modern fixtures, boho decor - Living Room: Open concept, modern furniture, boho textiles - 2 Kids Rooms: Fun, modern, boho elements - Master Bedroom: Cozy, modern, boho vibes - 2 Washrooms: Modern, with boho touches Ideal Skills and Experience: - Proven experience in full apartment renovations - Strong understanding of modern and boho design aesthetics - Ability to manage multiple rooms and coordinate tradespeople - Excellent project management skills to ensure timely completion - Strong communication skills for updates and feedback Please share your portfolio and relevant experience.

• Project: Attached Pavilion / Patio Cover • Location: Rear of residence • Size: 20’-0” wide (along house) × 18’-0” deep • Style: Open gable roof (not shed) • Use: Covered outdoor patio ⸻ STRUCTURAL INTENT (DO NOT CHANGE DESIGN) • Front support: ONLY (2) posts total • Beam: Engineered LVL spanning full 20’ • Posts: 6x6 structural (wrapped for appearance) • Roof type: Open gable, ridge perpendicular to house • Ceiling: Exposed structure with tongue & groove pine Important note to include: “Design intent is a clean, open span with no intermediate posts.” ⸻ CRITICAL DIMENSIONS • Width along house: 20’-0” • Projection: 18’-0” • Post lo...

I need plans drawn and stamped for a commercial space based on a basic sketch I will provide. Key requirements include: - Install 7 sinks (4 hand wash, 1 kitchenette, 2 utility) - Add a water heater - Install 6 electrical outlets - Modify non-load-bearing and partition walls Ideal skills and experience: - Experience drafter with P.E. stamp - Plumbing and electrical expertise - Ability to work from basic sketches or rough CAD

Hi I will share the details with the shortlisted candidates. Thanks

Looking to Break Into the US Construction Market — Let’s Build Something Big We’re scaling fast. I run a BIM and Engineering services company based in India, delivering: - LOD 400 BIM Modeling - MEP Coordination (Clash-free) - Shop Drawings and Fabrication Support - BOQ / BOM and Construction Documentation Now, we’re expanding into the US market. And I’m looking for: Business Development / Sales Experts (US Market) People who can bring real clients, not just leads What’s in it for you: - High earning potential (commission-based or hybrid) - Long-term partnership (not just a freelance gig) - Strong backend team delivering high-quality work - Competitive pricing advantage for easier deal closing Your role: - Connect with contracto...

We are a growing home improvement and repair company based in North Dublin. We specialize in residential renovations, extensions, and high-quality repairs. We are seeking a detail-oriented Estimator to join our team. This role is unique: you won’t just be crunching numbers; you will be the bridge between our projects and our local supply chain, ensuring we have the right materials at the right price. Key Responsibilities: Accurate Estimating: Perform detailed material take-offs and labor estimates from architectural drawings or site notes. Local Material Sourcing: Research and source construction materials from suppliers across North Dublin and the surrounding areas. You will be responsible for comparing prices to ensure project profitability. Supplier Coordination: Maintain rela...

I need a skilled contractor to provide structural steel and foundation engineering drawings for a concrete batch plant. Requirements: - Structural Steel Elements: Beams, columns, bracing, and frames. - Foundation Type: Pile foundation. - Load Requirements: Standard load capacity. Ideal Skills and Experience: - Expertise in structural steel fabrication and erection. - Experience with pile foundations. - Knowledge of standard load specifications. - Relevant certifications and safety training.

** GERMAN SPEAKER ** I have a couple of requirements for construction projects that I need you to source, call for fresh price quotes and gather up-to-date project details. Your main task will be to get on the phone, speak with the right contact, and gather the information. I will supply a construction-related item - such as '7x Cat Ladder 7m-8m height' and you will source where to find the item, get prices and then gather all information from the supplier/vendor. You may have to take my description, and find the local name for it, work on the logistic possibilities (do I need it delivered and installed, do I require manpower..etc) You should be flexible and ideally with an interest in construction. Because these conversations shape my project budgets, clarity and accuracy a...

I need a precise 2 D floor plan drafted in AutoCAD for a residential building. The drawing must be clean, to scale, and organized on logical layers (walls, openings, dimensions, annotations) so it can go straight into permitting and later construction sets. I will share my hand-sketched layout and all key dimensions as soon as we start; your role is to translate that information into a professional DWG while flagging any dimensional conflicts you spot. Accuracy is essential, so please apply industry-standard line weights and include clear room labels. If you work in AutoCAD 2020 or newer, be sure to save a backward-compatible version so others on the team can open it without issues. Deliverables: • Editable DWG file of the completed floor plan • Print-ready PDF at 1:100 (or s...

I'm building a barndo with a 300 sq ft garage addition. I need someone to do the following: - Measure and layout: - Exact dimensions of the garage - Placement of entrances and exits - Position of windows and overhangs - Provide a comprehensive list that includes: - Materials required - Construction steps - Cost estimates - Deliver 5 copies of the layout Ideal skills and experience: - Proficient in blueprints, CAD drawings, or hand-drawn sketches - Strong attention to detail - Experience in construction planning and estimation

I need detailed scaffold plans for a 1-2 story residential building. The scaffold is specifically for roof access and repairs. also paint to walls. Also Scaffold design over 1st Floor roof areas to access top floor roof, Ceramic Tile Roof Possible Aluminium Scaffold Required. Scaffold levels every 2 vertical metres At least 1xstair Access and 1xLadder Access 2X2ton Load Limit Loading Bays 2.4m² Design for Masonry Ties into Building Unimesh Type Containment. Requirements: - Structural integrity and safety compliance - Clear access routes and load-bearing specifications - Detailed diagrams and material lists - Experience in residential scaffold design Ideal Skills: - Background in construction or civil engineering - Familiarity with local building codes and regulations

I'm seeking an architect to draw plans for a complete home renovation to submit to get permits. Key areas to renovate include: - Kitchen - Bathroom - Living room Ideal Skills and Experience: - Proven experience in design drawings in whole home renovations - Strong portfolio in modern design - Expertise in improving functionality in home layouts - Knowledge of energy-efficient materials and methods is a plus Please share your portfolio and past project references.

I’m refreshing the brand identity of my commercial marine-construction company and need a logo that instantly communicates innovation and progress. The business builds seawalls and docks, so the mark must look at home on job-site signage yet remain clean enough for embroidered polos and hard-hat stickers. Here’s what I already have for you to work with: • Two finished designs I like but feel could benefit from extra polish or fresh variations. • A sketched third concept that should borrow visual cues from the first two. Core direction – Style: modern, minimal, and easy to reproduce at any scale. 3D variations as well. – Palette: blues/aqua paired with black as the accent or type color. – Visual hints to weave in: an excavator bucket, a palm tre...

Saya membutuhkan bantuan untuk membuat gambar bestek berupa rencana denah lantai yang detil untuk sebuah proyek perumahan. Fokus pekerjaan ini hanya pada desain arsitektur—tanpa perspektif eksterior maupun interior. Lingkup kerja: • Menyusun denah lantai lengkap beserta keterangan ruang, ukuran, dan sirkulasi. • Mengutamakan kejelasan dimensi agar mudah dipahami tim konstruksi. • Format akhir minimal PDF; jika memungkinkan sertakan file CAD (DWG) agar dapat saya edit kembali di AutoCAD. Saya sudah menyiapkan konsep tata ruang dasar; Anda tinggal mengembangkannya menjadi denah teknis siap pakai. Kirimkan portofolio singkat proyek serupa agar saya bisa menilai gaya serta ketelitian Anda.

Preciso que seja instalada uma lona plástica impermeável no vão deixado para o ar-condicionado da minha residência. O objetivo é vedar completamente a abertura, evitando infiltrações de chuva e entrada de poeira. Escopo do trabalho: • Medir o vão existente e cortar a lona no tamanho correto. • Fixar a lona de forma firme e estética, garantindo que fique bem tensionada e sem folgas. • Utilizar buchas, parafusos e perfis ou fitas adequadas para assegurar a vedação. • Verificar se há pontos de umidade ou reboco solto e, se necessário, fazer um preparo simples antes da fixação. Aceito sugestões de materiais ou técnicas que melhorem a durabilidade da ...

Je souhaite faire évoluer une application métier dédiée au secteur de la construction, écrite majoritairement en Python. Mon objectif est de bâtir une collaboration longue durée avec quelqu’un : • dont le français est la langue de travail (pas de traductions artificielles) ; • capable d’estimer et de justifier le nombre d’heures nécessaires par projet donné ; • réactif tant dans l’analyse que dans l’implémentation. Nous vous répondrons, si intéresser, dans les plus bref délais.

Saya sedang mengerjakan sebuah proyek konstruksi dan membutuhkan set gambar MEP yang khusus berfokus pada plumbing. Yang saya perlukan adalah paket gambar jelas dan rapi agar tim lapangan dapat langsung mengeksekusi instalasi tanpa kebingungan. Ruang lingkup pekerjaan: • Layout pipa supply dan drainase lengkap dengan penomoran pipa, ukuran, dan kemiringan. • Skema riser serta isometrik sederhana untuk mempermudah pemahaman ketinggian. • Detail sambungan fitting, valve, dan peralatan sanitary utama. • Penandaan titik inlet-outlet utama agar mudah di-cross-check di lapangan. Format akhir saya butuhkan dalam DWG (AutoCAD) dan versi PDF siap cetak. Mohon sertakan layer standard dan penomoran blok agar file tetap ringan serta mudah direvisi bila ada perubahan desain ...