3D CAD Jobs

I’m transforming an ordinary elementary classroom entrance into a portal of wonder, and I need a life-size 3D model of a fantasy dungeon door and door frame to make it happen. The final piece will sit flush on top of the existing door skin, so the design should be mostly façade-depth—just enough surface relief to pop, without becoming heavy or bulky. Style & mood • Pure fantasy, rich in mystery and awe. Think weather-worn timber, iron bands, moss creeping through cracks, glowing arcane runes and otherworldly engravings with a stone door frame—yet nothing that references real-world religions and no "evil vibe" (after all, this is an elementary school). Detail expectations I’m after a highly intricate sculpt: raised grain in each plank, pit...

Sheetmetal and diecasting die design need at least 10years of experience

I’ve mocked up a simple pair of aluminium blocks and now need them turned into proper, machinist-ready CAD. Each block will finish at about 80 mm high × 60 mm wide × 100 mm deep. Rear face: the two halves close around a tube in a clamshell style. I’m thinking four Allen-head bolts (M5 or M6, two per side) will do the job, but if you see a cleaner fixing method that still lets the parts open easily, I’m all ears. Front face: a 20 mm through-hole receives a docking dowel that must lock in place with a sprung plunge pin. Because the blocks form part of a mobility mechanism, the pin fit and dowel clearance need to keep movement tight yet allow quick release. What I need from you • 3D CAD files (STEP or similar) of both halves plus hardware •...

I have a complete design for a pre-engineered warehouse and now need a full set of fabrication drawings so my workshop can move straight into production. Your package must cover every structural detail, spell out all material specifications, and show every connection clearly enough that no extra RFIs will be needed. Here is what I expect to receive: • Structural details – columns, rafters, bracing, purlins, girts, baseplate layouts and anchor bolt plans. • Material specifications – section sizes, grades, thicknesses and finish notes. • Connection details – bolt schedules, weld symbols, splice plates, gussets and stiffeners. Deliverables: editable DWG files plus print-ready PDFs for each sheet. I will supply the GA drawings. Drawings must follow stand...

I already have a complete set of structural plans; a few details have changed and I need a qualified engineer to revise the drawings accordingly. The scope is light—think tweaks rather than redesigns—but the updates must be reflected clearly and comply with standard engineering practice so the plans remain permit-ready. You will receive the original CAD files (DWG) plus a PDF markup that highlights every item that changed. I’m looking for precise edits, updated notes where needed, and clean, printable sheets returned in both DWG and PDF formats. Deliverables: • Revised structural drawings with all requested changes incorporated • Updated title block and revision date • DWG and PDF versions ready for submission Please let me know your expected tur...

I’m working on an early-stage idea for a motorcycle accessory aimed at solving a practical problem faced by riders and pillions in India. I have the initial concept, sketches, and a fairly good understanding of the problem. I’m now looking for someone who can help turn that into a well-designed, functional product and eventually a manufacturable solution. The work would broadly involve: Reviewing and refining the initial concept Developing 3D CAD and engineering designs Advising on materials, dimensions, strength and durability Building and iterating prototypes through 3D printing, CNC, or other suitable methods Testing and refining the product on actual motorcycles Considering Indian road, weather and usage conditions Eventually preparing the design for manufacturing, inclu...

I need a photorealistic 3D model of a bicycle for premium product-visualization shots. Think catalogue-ready renders that showcase every spoke, cable, and texture. “High detail” is non-negotiable: accurate geometry, clean topology for close-ups, and PBR materials that hold up under studio lighting. I’m flexible on time, so you can focus on perfecting the craft rather than racing a deadline. Whether you prefer Blender, Maya, 3ds Max, or another pipeline, the final files just need to import cleanly into popular render engines such as Cycles, V-Ray, or Arnold. Deliverables • Native project file + exported FBX/OBJ • Separate, well-named texture maps (BaseColor, Roughness, Metallic, Normal, AO) at 4K • One turntable render and three hero stills on transp...

I already have a finished triangular STL model whose face carries a detailed textured relief. All I need now is the exact negative of that relief while leaving everything else exactly as-is. Here’s the scope: • Geometry preservation – the triangle’s outer shape, dimensions, and border stay untouched. • Pure inversion – every raised feature must become recessed and vice-versa, with no rotation, mirroring, or lateral drift. Texture positions must match the original perfectly. • High fidelity – the inverse surface should capture every nuance currently present; no loss of resolution is acceptable. • Production ready – the resulting file must be watertight/manifold and pass mesh checks for 3D printing. I work in Blender and wo...

Sheetmetal and diecasting die design need at least 10years of experience

I already have a complete 3D file of the house, yet the interior still looks unfinished. The living room, kitchen, and bathroom all require fresh passes so the geometry and detailing feel consistent and ready for final rendering. Living room first: the base structure is there, but several furniture pieces and decorative objects need to be remodelled or replaced so they match the real-world references I will provide. Once the geometry is clean, I want the overall scene optimised—no floating vertices, overlapping meshes, or naming clutter. Kitchen and bathroom each have smaller touch-ups: cabinet doors clipping walls, misaligned fixtures, and a few missing elements. Nothing from scratch, just accurate, well-scaled parts dropped into place and UVs that make texturing painless. I will...

I have a set of architectural plans of a duplex apartment. I need that turned into a clean, well-organized Blender file. The focus is strictly on the basic structure and layout—no detailed furnishings, textures, or lighting at this stage. Everything should follow a minimalist aesthetic, so keep the geometry lean, name objects logically, and group elements in a way that makes future iterations effortless. You’ll receive the PDF drawings as soon as we start; from there, I expect a single .blend file with accurate dimensions, separate collections for walls, floors, roof, and openings, and no extra modifiers left unapplied. If you model efficiently and keep the file tidy, we’ll have more phases to add detail later. 1) Please send me an example of something you already did. ...

I have a single reference image that I’d like transformed into a fully printable coloured 3D model. The style must stay decidedly cartoonish, yet I still want high-detail sculpting so the final print pops once it is scaled to a medium size (roughly 6–12 inches tall). You’ll need to interpret the pose, proportions, and facial expression from the photo, build the mesh, add crisp surface details, and deliver a clean, watertight file ready for FDM or resin printing—STL or OBJ is fine. Please keep wall thicknesses, overhangs, and support considerations in mind so the figure prints without issues. If you have experience sculpting character minis, toys, or collectibles and can share a few past examples, I’d love to see them before we lock in the project.

I need a playful, nature-inspired toy made for home 3D printing: a simple cartoonish rock formation that accepts a matching jewel which snaps into place with small neodymium magnets. Think of it as the first piece in a collectible series; once this concept is proven I’ll commission more pairings, so the model architecture must remain editable. Scope • Base: rounded, low-poly rock cluster—no intricate veins or micro-cracks, just enough stylised planes to read as “rock” while keeping the slicer happy. • Insert: a faceted jewel that nests cleanly into a pocket on the rock and sits about half of the depth of the jewel proud when seated. x5 of these pockets in random places around the rock. Technical Requirements • Each part printable without supp...

I’m commissioning a bespoke coin that features a striking, highly detailed lion’s face on the obverse and a simple, flat reverse that I can later customize with wording or a logo. My immediate need is the complete digital design—art-ready and production-ready—so the mint I work with can move straight into tooling. Here is what I need from you: • A sculpted 2-sided coin design (relief style suitable for minting) rendered at a 40 mm diameter with a standard milled edge • Final deliverables in STL or STEP for the die maker, plus a high-resolution JPEG/PNG render I can use for mock-ups • Clean layer naming and clear separation of front and back in the file so the mint can adjust thickness or edge text without rework I haven’t locked in a mater...

I need a mechanical/sheet-metal designer to design a gaming PC desk based on a reference video. The computer will be installed inside the table under an opening glass top, with removable X-shaped legs. The design must be ready for manufacturing using fiber laser cutting, bending and welding. Any professional CAD software is acceptable. Required files: Complete editable 3D model STEP files DXF files for laser cutting Bend and assembly drawings Most important requirement: You must have previously designed a PC case, gaming PC desk or similar computer chassis. Please apply only with pictures or examples of your previous related work. Send your price, delivery time and previous PC case designs with your application.

3D Modeler Needed – Modeling from LiDAR Point Cloud I am looking for an experienced 3D modeler/architectural modeler to create a detailed 3D model of a historic architectural site based on a high-resolution LiDAR/SLAM point cloud. The point cloud will be provided by me. The main task is to accurately reconstruct the existing buildings and architectural elements from the point cloud. Scope of Work Import and work with a large LiDAR/point cloud dataset Create an accurate 3D model based on the existing geometry Model building facades, roofs, walls, openings and architectural details Maintain accurate dimensions and proportions according to the point cloud Clean and optimize the model geometry Ensure the model follows the actual scanned geometry Deliver the final 3D model in a format ...

FEA / CFD Engineer – 63m Aluminium Vessel We are looking for a freelance Naval Architect / Marine Engineer to assist with FEA and/or CFD for a 63m aluminium vessel being prepared for RINA class approval. FEA: • Simplified global FEA model based on our existing 3D structural model • Global strength, longitudinal and torsional analysis • Relevant load cases, stresses and deformations • Local FEA of engine foundations • Calculation report for RINA CFD: • Resistance calculations at 5, 10, 15, 20, 25 knots and maximum speed. The work can be split between specialists. If you only cover FEA or CFD, we are still interested. Would require to see examples of similar marine/aluminium vessel work, competitive pricing is important.

3D CAD Designer / Mechanical Product Modeler – Prototype Phase (Bone Conduction Device) I’m looking for an Australian‑based mechanical/CAD designer to create a prototype‑ready 3D model for a small wearable haptic device. I will provide AI renders, functional descriptions, and clear guidance on the geometry. The device uses a single‑pad bone‑conduction vibration interface, so the internal layout must support vibration transfer, not dampening. If you’ve worked on small electronics housings, wearables, haptics, or silicone‑interface products, this will be familiar. This project is prototype‑only (no manufacturing prep). You’ll be modelling a compact enclosure, motor cavity, silicone interface pad, and basic internal supports suitable for 3D printing and silicone cas...

I need an experienced mechanical CAD/product designer to convert an existing physical product concept into a fully parametric, 3D-printable hard-shell enclosure. Approximate overall envelope: 280 x 300 x 120 mm. Required experience: -Fusion 360 -hard-shell consumer product enclosures -FDM 3D printing / prototyping -two-part lid and base assemblies -hinges and latches -screw bosses and heat-set inserts -gasket channels -design for future manufacturing The detailed product concept, purpose and proprietary features are confidential and will only be provided to the selected freelancer after confidentiality terms are agreed. Required final files will include native editable CAD files, STEP files and STL files. Please have experience with functional mechanical enclosure design, not just vi...

I'm looking for an experienced 3D CAD designer to create detailed models for a product design project. The purpose of these models will be for prototyping. Key Requirements: - Expertise in product design - Proficiency in 3D CAD software - Ability to create detailed components and features Ideal Skills and Experience: - Strong background in mechanical design - Experience with prototyping processes - Attention to detail and accuracy Should be based out of Hyderabad, as the work should be carried out on-site. Looking forward to your bids!

I'm looking for a skilled designer to create a cup holder specifically for installation in the credit card slot of a truck. Requirements: - Designed to securely hold various cup sizes - Must be made from durable plastic(PETG OR ABS) - Custom fit for credit card slot installation Ideal skills and experience: - Experience with automotive accessories - Proficient in plastic design and fabrication - Attention to detail for a snug fit

I need detailed shop drawings for a pantry and foyer built-ins, produced in MicroVellum and ready to go straight to the CNC as a manufacturing guide. The package must include fully dimensioned plans, elevations, sections, and all required joinery details, plus the MicroVellum project file with correct tooling setups and a clean nesting (G-code/DXF) export so the parts can be cut without further edits. You are free to select the most appropriate material libraries in MicroVellum—as long as the drawings clearly call out panels, edge treatments, and hardware and everything tallies with the nesting file. If something is unclear, flag it early; accuracy on hole patterns, reveals, and clearances is critical. Deliverables • Shop drawing PDF set for pantry and foyer cabinetry &bul...

I need a 3D CAD file created that will be ready to send to a mold creation company in a .STEP or .STL file. You will need to create this based on an image of a prototype we created and some sketches. You will need to ask questions based on what will be needed to make it since I do not know what you will require.

I have a set of high-resolution photos of one person, along with a short video for extra reference. I need you to turn this material into a watertight, print-ready 3D model suitable for producing a life-size indoor statue. Because the piece will be viewed up close, every fold of clothing, facial feature and subtle contour has to be captured with high fidelity and a clean topology that will withstand the stresses of full-scale 3D printing. You are free to use any proven workflow—RealityCapture, Metashape, ZBrush, Blender, Maya, or a combination—but the final files must import smoothly into standard slicing software (PrusaSlicer, Cura, etc.) without repair. Feel free to hollow, key or section the model if that simplifies printing and assembly; just keep wall thicknesses and inte...

I need a plastic snap-fit cap designed and engineered for a consumer-facing pill bottle. This project covers the full path from concept refinement through design for manufacturability so that we can move straight into tooling when the design is approved. Scope of work • Create a 3D CAD model of the cap and complementary neck finish that secures solid medication (pills, tablets) with a positive snap action suitable for repeated daily use by end-customers. • Optimise the geometry for injection-moulded plastic, specifying draft angles, shut-offs, gate locations and any living hinges or tamper-evident features that add value without increasing cycle time unnecessarily. • Run tolerance and stack-up studies to be sure the cap seals consistently when mass-produced. • ...

I need a complete design for a compact conveyor—4,1 meter long x 500 mm —dedicated to material-handling work. The key requirement is that the system use an Intralox modular belt driven by an integrated drum motor. The position of the drum motor is still to be defined. ( Under the conveyor belt, or at the noze of the belt. Here’s what I expect: • 3-D model and detailed fabrication drawings (STEP/DWG) •• Bill of materials and maintenance notes I will give you the belt type that is to be approved, and the conveyor belt series, from the Intralox range, and the intralox drwings. I will also give you the motor drawings. I will review the design on fit, manufacturability, and conformance with Intralox guidelines before sign-off.

I’m preparing a series of custom built-ins for a client and need a drafter who can turn my rough sketches and field measurements into fully detailed shop drawings. The cabinetry will follow a clean, modern aesthetic and will be fabricated in solid wood, so every joint, reveal, and grain direction must be called out clearly. You’ll take the dimensions I provide, translate them into accurate plan, elevation, and section views, and include all hardware locations, carcass construction details, and face-frame or slab-door specifications where appropriate. I prefer work in AutoCAD or a compatible DWG format, with a PDF issue set for review. Deliverables • Complete DWG files ready for the millwork shop • Coordinated PDF sheets (plans, elevations, sections, and critical...

I need detailed, fully dimensioned AutoCAD drawings for a reinforced concrete (RCC) structure, including all necessary structural details and construction-ready documentation.

The project is a compact, bipedal humanoid that will rely on a PA-CF 3D-printed chassis and 21 actuators. I need a complete mechanical design package created exclusively in Fusion 360, ready for immediate prototyping and eventual low-volume production. Scope of work – Model the entire skeleton, shell and joint architecture so every component is ready for direct PA-CF printing without post-machining. – Integrate 21 actuators (servo or BLDC) with realistic torque, weight and envelope constraints; include mounts, brackets, gear trains or harmonic drives where necessary. – Optimise wall thicknesses, ribs and lattice infill for strength-to-weight, thermal dissipation and print time. – Plan fasteners, cable routing and access points to keep the robot serviceable....

The project is a compact, bipedal humanoid that will rely on a PA-CF 3D-printed chassis and 21 actuators. I need a complete mechanical design package created exclusively in Fusion 360, ready for immediate prototyping and eventual low-volume production. Scope of work – Model the entire skeleton, shell and joint architecture so every component is ready for direct PA-CF printing without post-machining. – Integrate 21 actuators (servo or BLDC) with realistic torque, weight and envelope constraints; include mounts, brackets, gear trains or harmonic drives where necessary. – Optimise wall thicknesses, ribs and lattice infill for strength-to-weight, thermal dissipation and print time. – Plan fasteners, cable routing and access points to keep the robot serviceable....

I’m developing a drone for an engineering project and need a skilled CAD specialist to turn my reference images and hand-drawn sketches into a fully detailed mechanical design. Your task is to model every component, assemble the parts so tolerances and clearances make sense, and create a short motion animation that shows the drone’s range of movement and an exploded view for presentation. You’ll receive the sketches and photos as soon as we start; they outline the overall frame, motor mounts, landing gear, and gimbal concept. From there, I’d like you to: • Build precise 3D geometry of each mechanical part • Produce a clean, constraint-driven assembly that fits together without interference • Generate an MP4 (or similar) animation that rotates th...

I have an early-stage product idea that now needs to move from sketch to a clean SolidWorks model suitable for a concept-level prototype. The priority is accurate form, overall proportions, and aesthetic detail rather than full engineering for production, so you can focus on capturing the look and basic spatial relationships while keeping the file lightweight and editable. I will supply rough drawings, reference photos, and key envelope dimensions as soon as we start. From there, I’d like you to build a well-structured feature tree in SolidWorks 2021 or later, name every feature clearly, and keep all dimensions fully defined. Once the main shape is approved, small tweaks and fillet passes may be required before sign-off. Deliverables: • Native SolidWorks (.sldprt / .sldasm) fi...

I am commissioning two separate, highly detailed 3D sculpts: one of Chhatrapati Shivaji Maharaj and one of Chhatrapati Sambhaji Maharaj. Both pieces will be printed as miniatures, so every fold in the robes, ornament on the armour, and facial feature needs to hold up at a reduced scale. The look I am after is fully realistic—no stylised exaggeration or low-poly shortcuts. I will supply reference photographs and historical illustrations to guide anatomy, clothing, weaponry, and posture. I want these sculpts to feel true to life, with intricate textures that celebrate the legacy of each ruler. Because the final output is for 3D printing, the models must be: • Watertight, manifold files (STL or OBJ) • Optimised for resin printing at miniature size without losing micro-d...

I’m preparing a full-scale renovation and need a detailed 3D visualisation of my entire apartment so I can make decisions with confidence before construction begins. The project covers the living room, kitchen and all bedrooms, and I want every space to reflect a warm, timeless traditional style—think classic mouldings, rich wood tones, elegant fixtures and a balanced, homely colour palette. Here’s what I’d like from you: • Photorealistic still renders for each room (day and night lighting). • An editable 3D model (SketchUp, 3ds Max, Blender or similar) so my contractor and I can review measurements and materials. • A simple floor-plan view with furniture layout to double-check circulation paths and clearances. • Optional but welcome: a short wa...

I am looking for a specialist in parametric CAD and automation to develop a library of kitchen cabinet modules in Onshape. Each cabinet module should be fully parametric. When changing the width, height, depth, or panel thickness, all parts of the cabinet should update automatically. The system should generate: * Individual cabinet parts * Bill of Materials (BOM) * Cut lists * Door, shelf, and panel dimensions * Edge banding information * Manufacturing drawings * Drilling, grooves, and other required machining operations I also need to develop a workflow to transfer the manufacturing and machining information to an SCM CX100 CNC machine with as little manual intervention as possible. For the first stage, I would like to develop and test approximately 5 standard kitchen cabinet modules...

Make sure read all details carefully have a 3d scan of a car chassis. I have 2d renders and 3d file of the body i want to put on the chassis. I need the body fit to the chassis and sliced into car buck templates and or be able to 3d print the body I want to make sure we're completely on the same page about what I need from the CAD work. The goal is to take my Zanatta body design and accurately fit it to the Porsche 986 rolling chassis. This isn't just for rendering or visualization. The finished model will ultimately be used to build the real full-size car, so dimensions, scale, wheel locations and alignment need to be accurate. I can provide the 3D scan/model of the stripped 986 chassis and all of my Zanatta body reference images/models. The chassis should be treated as the dim...

I need assistance in preparing OBJ files for 3D printing. The models are for prototyping purposes. Tasks include: - Scaling and resizing - Adding supports - Slicing and layering Ideal skills and experience: - Proficiency in 3D printing software - Experience with OBJ file modifications - Attention to detail and accuracy

I have a flat PNG of our school logo and need it transformed into a clean, editable .3mf file for a hype chain that can go straight onto a printer bed without additional fixes. Because the piece will be handed out as a promotional giveaway, I’m open to your recommendations on overall size and thickness so it strikes a good balance between detail, strength, and quick print time. Additionally, I need this to be editable in both color and text. I have attached an example showing a similar hype chain, but the image I sent that includes #25 Wood Jr, is what I want the hype chain template to be. The model must be watertight, with correct normals, no stray vertices, and already oriented for printing. Feel free to use the toolchain you prefer—Illustrator or Inkscape for tracing, Blen...

I need a browser-run solution that lets my users prepare their own 3D files for printing without installing anything locally. The core workflow should feel as simple as a drag-and-drop: they upload an STL or OBJ, see it in an interactive viewport, make quick edits, then send it straight to my printer queue. For editing, I want the full range from basic moves to more creative tweaks: • Basic transformations – scale, rotate, and translate with numeric input or on-screen gizmos. • Advanced tools – light sculpting and texturing so customers can smooth areas, add or subtract material, and preview surface finishes. • Template driven customization – load a library of predefined parts (for example phone-case shells or name-plate blanks) and let users personal...

I have an existing surgical drill device captured only as a high-resolution STL mesh. I now need a clean, fully watertight solid model in STEP format so the part can move straight into CNC machining and other manufacturing workflows. The job calls for reverse-engineering the mesh into a parametric solid: surfaces must be healed, all voids closed, and critical geometric details preserved exactly as they appear in the STL. Wall thicknesses, hole diameters, and mating faces have to remain within typical medical-grade tolerances so that downstream suppliers can rely on the file without additional touch-ups. Preferred tools are SolidWorks, Siemens NX, Fusion 360, or comparable CAD software capable of producing STEP AP214/AP242 output; feel free to use mesh repair utilities like Geomagic o...

I'm looking for a 3D artist to create basic 3D drawings in STEP format for prototype modeling. Requirements: - Translate my sketches into 3D models. - Basic shapes and dimensions only. Ideal Skills: - Proficiency in 3D modeling software - Experience with STEP file format - Attention to detail and accuracy Please provide samples of previous work.

I need a drafter who can turn my blueprints and sketches into fabrication-ready shop drawings for a series of bespoke cabinets, wall panelling and other highly detailed joinery pieces. All material specifications are already defined, and I can supply a full folder of reference photos and inspiration images to guide style, proportions and finishes. The goal is to translate the design intent precisely so my workshop can move straight into production with no guesswork. Drawings should include plan, elevation and detailed section views, accurate dimensions, material call-outs and clear hardware annotations. If you work in AutoCAD or a comparable platform that exports clean DWG/PDF files, that will align perfectly with our workflow. Deliverables • Complete set of shop drawings for each...

I need a sturdy, matte-finish adapter that lets me screw a standard 3 ⁄ 4" broom handle into a 1 ¾" threaded pipe. One end must slip cleanly over the 1 ¾" pipe and lock in place; the opposite end should present a true 3 ⁄ 4" broom thread. Because the part will live outdoors, I’ve chosen ABS for its weather resistance, and I’d like the internal and external threads reinforced so they won’t strip after repeated use. You can work from the reference photo I supplied, adjusting only the larger end so it mates accurately with the 1 ¾" pipe OD while keeping the overall profile similar. Dimensional accuracy is critical—both threads should engage smoothly by hand with no wobble, and the exterior must come off the pri...

The project is a compact, bipedal humanoid that will rely on a PA-CF 3D-printed chassis and 21 actuators. I need a complete mechanical design package created exclusively in Fusion 360, ready for immediate prototyping and eventual low-volume production. Scope of work – Model the entire skeleton, shell and joint architecture so every component is ready for direct PA-CF printing without post-machining. – Integrate 21 actuators (servo or BLDC) with realistic torque, weight and envelope constraints; include mounts, brackets, gear trains or harmonic drives where necessary. – Optimise wall thicknesses, ribs and lattice infill for strength-to-weight, thermal dissipation and print time. – Plan fasteners, cable routing and access points to keep the robot serviceable....

I’m developing a new food-processing machine and need an experienced mechanical product designer who can take it from concept sketches to a complete, production-ready CAD package. The core of the assignment is full mechanical design: modelling all components and assemblies, laying out the drive system, and making sure the entire line meets food-industry hygiene and safety requirements. You’ll translate my functional notes into detailed 3D geometry, refine the mechanism for manufacturability, and generate the fabrication drawings we can hand straight to the shop. I work in SolidWorks myself, so native files in that format would be ideal, but I’m open to Inventor or STEP if that suits your workflow better. Good practice in tolerancing, material selection and sealed-shaft d...

I need six separate head sculpts—Donald Trump, Taylor Swift, Elvis Presley, Marilyn Monroe, Sponge Bob and Spider-Man—each rendered in a realistic style, measuring exactly 3 inches wide by 4 inches high. Colour isn’t necessary; what matters is a faithful likeness that will hold up when printed. The medium must be 3-D printed resin or filament, finished with a subtle surface texture rather than a perfectly smooth polish. If you work digitally, supply watertight STL (or comparable) files ready for printing at the stated dimensions and resolution; if you have in-house printing capability, quote for producing and shipping the physical pieces as well. Because these will display side-by-side, consistent scale and proportional treatment is critical. Please model hair, faci...

I need an experienced mechanical engineer to rethink an existing machine so it runs significantly more efficiently. The current design performs its task reliably, but power consumption is high and several moving components cause unnecessary downtime for maintenance. You will receive the original 3-D CAD model (SolidWorks) along with performance logs, vibration data, and photos of wear points. Your task is to analyse the weak spots, propose redesigns for critical sub-assemblies, and demonstrate—through calculation or simulation—that the new concept will cut energy use and extend component life. Key deliverables • Updated CAD files and 2-D manufacturing drawings in native and neutral formats • Brief engineering report detailing the design rationale, efficiency g...

I’m building a coffee table and need a precise STL of a single leg in a classic style. The exact height, width and depth are already set, and I’ll send you the reference photos the moment we start so you can mirror the proportions and detailing accurately. The model must be clean, watertight and print-ready, suitable for both 3-D printing and CNC machining. Please capture any fluting, curves or small ornamental flourishes so they survive finishing and light sanding at full furniture scale. Once I receive a first draft I’ll run it through my slicer and share feedback; one quick revision is part of the scope. When everything checks out, just supply the final STL—as well as the native design file if you work in Fusion 360, SolidWorks or similar—and we’r...

I have an ongoing pipeline of projects that consistently need fresh, production-ready 3D models. My priority is the modeling itself—clean topology, well-laid UVs, and source files that remain easy to revise as projects evolve. You’ll be delivering the finished model files (preferably in a common, non-proprietary format alongside your native scene) plus any textures or reference notes you generate along the way. If you already work in tools such as Blender, Maya, 3ds Max, or ZBrush, that will fit smoothly into my current workflow, but I’m flexible as long as the end result imports error-free. Because this is a long-term collaboration, clear communication, predictable turnaround times, and a willingness to iterate are more important to me than flashy presentation render...

This explain the mechanism. I to fit DC Motors, Timing belts and make it real