Pwm transmitter receiver jobs

...proper power delivery and protection. - Include circuitry to switch between power sources (USB Type-C and battery power bank) as needed, with appropriate voltage regulation and power management. 9. RGB LEDs: - Integrate the RGB LEDs into the schematic, providing connections for power, ground, and control signals. - Include circuitry for programmable control of the LEDs, possibly using PWM signals from the RK3588 SoC or an external microcontroller. When designing the schematic, be sure to follow best practices for signal integrity, power distribution, and thermal management. Consult the datasheets and reference designs for each component to ensure proper connections and compatibility. Additionally, consider factors such as power consumption, board layout, and user inter...

I Have Citrix XenApp 7.18 installed in my test environment everything working ok using Citrix workspace and receiver application what I am looking for Configure Citrix XenApp to enable users to access Citrix Receiver from the web using HTML5 technology, without the need for a Citrix Gateway appliance.

We're looking for a programmer with experience of the STM8 MCU. We've already created a program that works well, but flash memory is limited to 8KB and we don't have enough space to store our entire program. The current size of the compiled code is 10 KB. We're looking for a programmer capable of compacting our specific code and libraries used. Our current software includes the follow...experience of the STM8 MCU. We've already created a program that works well, but flash memory is limited to 8KB and we don't have enough space to store our entire program. The current size of the compiled code is 10 KB. We're looking for a programmer capable of compacting our specific code and libraries used. Our current software includes the following libraries: - W...

I am looking for a reliable package receiver in west of Ireland who can handle packages. The ideal candidate should be able to receive and process packages with specific items expected. The expected turnaround time for receiving and processing packages is within 1 week. Skills and Experience: - Experience in package handling and logistics - Ability to handle packages weighing more than 10kg I need someone who can receive the packages and hold them, until I get someone to collect it from your place. The products would be something like clothes, electronics, cosmetic items.

...of power electronics principles, converter topologies such as buck, boost, buck-boost, flyback, forward, full-bridge, half-bridge, and their operating principles, electrical circuits, semiconductor devices, magnetics, and passive components. Familiarity with control systems theory including feedback, PID control, digital control techniques, and modulation schemes (e.g., Pulse Width Modulation - PWM). Knowledge of transformer and inductor design principles, including core materials, winding configurations, and losses. Regulatory Compliance: Familiarity with safety standards and regulations governing high voltage systems (e.g., UL, IEC). Problem-solving Skills: Ability to troubleshoot and resolve PCB layout issues related to power distribution, thermal management, and signal integr...

We are refining our Falcon race timing system for accuracy in the desert, specifically to tracking falcons over a 400-meter course. This system must detect objects (falcon) around 10cm x 10cm...(falcon) around 10cm x 10cm, in the outdoor desert environment Key Specifications: - LiDAR Sensors: - Range: Up to 20m. - Aperture: 180 degrees. - Frequency: 100Hz. - Resolution: 0.32 degrees. - Power: 3W. - Connectivity: Visual display timer and device connectivity for real-time tracking, supported by a battery life of at least 4 hours. -Signal Synchronization: Transmitter at the endpoint and receiver at the start for accurate timing. Operational Environment: The design must withstand the desert’s outdoor conditions, howeverwe dont run the race when there is wind...

I'm seeking an experienced RF design engineer to partner for lab project involving: Design of discrete circuit transmitter with specific RF performance requirement that shall be provided as needed. From the DAC output to RF frequency 5GHz. One stage up-conversion. modeling and simulation of the transmitter signal chain that provides performance details related to link budget RF chain analysis, inter modulation and harmonic distortion using RF/microwave circuit synthesis and simulation software for circuit board and subsystem designers called "Genesys" Desirable Skills and Experiences: - Proven experience in the field of electronics. - Expertise in RF circuit and antenna designing. - Knowledge of medium frequency range (1 GHz - 10 GHz) in RF circuit and anten...

...such as message creation in the channels you're interested in monitoring. 3. **Develop a Receiver**: Write a Python script or application that listens for incoming messages from Slack through the webhook or event subscription. This receiver should parse the incoming messages and extract relevant information such as sender, timestamp, and message content. 4. **Forward Messages to Cortex XSOAR**: Once you've extracted the necessary information from the Slack messages, forward them to Cortex XSOAR using its API or integration mechanisms. You may need to transform the Slack message data into a format compatible with Cortex XSOAR's input requirements. 5. **Handle Authentication**: Ensure that your receiver authenticates with both Slack and Cortex XSOAR ...

I am looking for an experienced engineer who can take on firmware development spanning several wireless devices with Wi-Fi 6, Wi-Fi 7, and LTE 5G connectivity. We are looking for Embedded Engineers to join our team. What you will do: Design, develop, and refactor cloud connectivity apps for our CPEs (Customer Premises Equipment). Reproduce, isolate, and deb...Experience with an OpenWrt-based build system, preferably QSDK. Ability to read and write simple scripts in common languages such as Bash, Python, etc. Deep understanding of C and C++ programming for a Linux runtime environment. Nice to have: Experience with Quectel or other vendor LTE. Experience with DeviceTree. Experience with Wireless Technologies. Experience with Luci. Experience with I2C, GPIO, PWM. This is an ongoing...

In this project, you are required to modify the provided MATLAB program to study BSS-based interference suppression in wireless receivers with diversity reception, i.e., receivers with multiple antennas and downconversion chains. Like in the example provided, assume all user signals are QPSK and have the same power level. You will need to write a lab report The full project description and requirements are provided in the attached file. Please don't accept until you look at the description project.

...multiple sub-PCs. project setup: 1 main PC connected to mutliple sub PC (all PCs running on Windows). the number of sub PC will be between 1 to 12. project requirements: 1. Data Sender - Make a "data sender" Unity3D program/project that can send UDP data from main PC to 1 sub PC or to all sub PC running a "data receiver" Unity3D program. the number of sub PC will be between 1 to 12. 2. Data Reciever - Make a "receiver" Unity3D program that can receive from the Data Sender. The receiver will infinitely wait for data until it is shutdown. 3. Make a document on how to setup the whole project including all instructions related to firewall exemptions and ports. Key Objective: • The prime task includes setting up a main PC that ...

I'm looking for an innovative designer to create a funky, trendy design for American football gloves. The primary focus should be on the style, rather than the grip or protection aspects. The gloves are meant to be eye-catching and fashionable while still being fit for the sport. Ideal qualifications: - Experience in sports accessories design, particularly gloves. - Demonstrated understanding of American football culture and style trends. - Strong graphical design skills. - Ability to incorporate functionality with aesthetics. - Knowledge of materials used in the manufacturing of sports gloves would be a plus. This project is a great opportunity to bring a unique product to the American football market. I look forward to seeing your creativity shine on this project. Must present ...

I am in need of a unique app for Fulcrum which would help me input 2 or 3 coordinates in decimal degrees and their respective bearings to triangulate the location of a VHF transmitter within a wildlife tracking collar. Key Features: - The application should display the located transmitter's coordinates on the Fulcrum map, ideally via a pinpoint or marker. - It should also have the capability to save these specific location coordinates for future reference. - Both manual input and GPS location inputs should be available for the coordinates. Ideal Skills: The ideal freelancer for this project would have in-depth knowledge of app development especially for Fulcrum, a strong understanding of geolocation services and extensive experience in software design to provide an intuitive...

I am looking for a proficient engineer to develop a buck-boost converter model using MATLAB Simulink. The objective of this project is to use Circuit Averaging to create a model for buck-boost converter which can be controlled by PWM. Key Responsibilities: - Design and implement a buck-boost converter model using MATLAB Simulink. - Ensure that the model accurately represents voltage regulation. Required Skills & Experience: - Strong background in electrical engineering, particularly in power electronics and converters. - Proficiency in MATLAB Simulink for electrical circuit modelling and simulations. - A solid understanding of buck-boost converter principles, design, and applications. - Attention to detail and a strong emphasis on accuracy. - Ability to communicate complex ...

1. Reduce the dc barrel jacks hole size to match actual pin size 2. Reduce the rca port hole size to match actual pin size 3. Change the input connector for VIN (should handle 10-15Amp) 4. Add capability of adding a switch for the main input 5. Figure out the reset mechanism to upload program via serial port 6. Add led lights to each power rail and pwm rail. 7. One digital port on MCU should be able to turn off all the LED lights in1 go. 8. Input power monitoring (input voltage and current @VIN) 9. Reverse polarity protection 10. Voltage monitoring, for the output of buck/boost 11. Add usb to serial

I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100 GHz) that would consume less energy compa...

I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100 GHz) that would consume less energy compa...

...it and forward it to specific hardware of countrywide distributed DVB-C modulators ... to be generating RF-based UHF signals for cable-TV networks.... - like up to 893x locations so far we might be able to deliver directly by 50 mbit/s each using that DVB-x2 mux as MPEG-TS ... (it is always the same DVB-x2 MPEG-TS mux... but the RF-interface is different....- to be transmitting to the clients receiver ... it can be DVB-T2 as own network.. using a special hardware by the manufacturer.... they will tell us later how they want that MPEG-TS... - but we have even CHEAP dvb-C encoders oder modulators for local CABLE-TV operators... like we have manufacturers being able to manufacture/produce affordable 19" rackmount-kits for even less than 150,- US-dollars ... like having 2x 10GE ...

For this endeavor, I'm looking for an expert in PWM (Pulse Width Modulation) current controllers and motor performance optimization. To optimize the efficient speed control of my PMBLDC (Permanent Magnet Brushless DC) motor, the successful freelancer will be implementing a PWM current controller. Mandatory tasks: - Conduct a practical application that reveals different parameter waveforms. - The parameters to be plotted in the waveforms are speed, current, torque, rotor angle, and back emf. - These parameters must be plotted as line graphs. Ideal skills and experience: - Extensive knowledge and experience in PWM current controllers. - Previous experience with motor performance optimization. - Proven competency in plotting parameter waveforms in line graph format...

In this role, my expectations include: -J1939 CAN Protocol establishment for a transmitter and receiver in a truck and bus control application -Development of effective and efficient communication software, using the C language to ensure fluidity and stability of protocol -Identifying any existing problems or bugs with the protocol, finding suitable solutions which aid in improving the project's overall performance The desired freelancer should have in-depth knowledge and experience concerning the C language coupled with a keen understanding of the J1939 CAN protocol. Familiarity with truck and bus control applications will be a significant advantage.

I need an advanced software engineer with experience in C++ and embedded systems. Currently, I'm facing an issue where there's no PWM output in the audio player I have on STM32G030C8. The player needs to RAW Audio stored in an array via DMA. Here are my requirements: - Debug the STM32G030C8 code on STM32CubeIDE and resolve the PWM output issue using DMA I've verified the PWM configuration settings on STM32G030C8 from the datasheet and reference manual but the issue still persists. The fixing of this issue would entail a deep understanding and proficiency in debugging STM32 controllers. Previous experience in Timer PWM configuration would be advantageous . I've included all the project and generated files

I am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km to 5km. With 4 chanel. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay a...

I want to create Google add on, which can be downloaded by different users. Work: to send multiple email to different users with custome message, attachment and title. These data located in Google spreadsheet which contains the field like name of email receiver, email id, title , name of file for attachment, message etc. There is no constraints for paid users while for free users daily email are limited to 10.

Please Sign Up or Login to see details.

...Parameters: Public Key (String): (required) Obtained from Ship24Go Integration Menu. Private Key (String): (required) Obtained from Ship24Go Integration Menu. Sender Country (String): (required) ISO Code (Two Letters) e.g., IT. Receiver Country (String): (required) ISO Code (Two Letters) e.g., IT. Sender Zipcode (String): (required) Alphanumeric. Receiver Zipcode (String): (required) Alphanumeric. Sender State (String): (required) Two Letters e.g., TN. Receiver State (String): (required) Two Letters e.g., TN. Sender City (String): (required) Alphanumeric. Receiver City (String): (required) Alphanumeric. Weight (Integer/Decimal): (required) Integer or decimal type. Height (Integer/Decimal): (required) Integer or decimal type. Width (Integer/Decimal): (require...

...We need an addition to the software and application. We need a selection tab for RTCM messages. A tab in the application where the user can select the messages they want to activate. There will be messages that are already enabled by default and those that will be possible to select. This must be present in all software that uses GNSS. Regarding Radio Receivers, we have two models, the Radio Receiver without GNSS, and with GNSS. Only the Radio with GNSS will have this tab and the other will only have the 1008 message selector. ------------------------ These are the RTCM messages we will use. RTCM-1004 "Selectable" RTCM-1005 "Standard" RTCM-1006 "Selectable" RTCM-1008 "Selectable" RTCM-1012 "Selectable" RTCM-1032 "Selectab...

I need a programmer to create a receiver for for end to end monitoring of email infrastructures in accordance to the opentelemetry specification. This receiver will send emails via SMTP every 5 minutes (controlable) and retrieve the emails using a PoP3 account at the same frequency. The key requirements and tasks for this project include but are not limited to: - Generating and documenting metrics and logs from the email process, including: - The number of emails sent - The number of emails received - The number of failed email transmissions - Cycle time for each email between send and receive - for SMTP and POP3: Bytes Transferred, Bytes per Second, Connect Time, Lookup Time (when DNS Name is used instead of an IP Address), Response Time - log messages for

...Booking app with 3 modules (Carrier Module, Driver Module and Admin Module) Platform: Android and Web for now. (IOS later as a separate project). Carrier Module: Enable the carrier to create new trips and created multiple bookings under each trip. Should be able to assign a Driver to each trip. Also need payment Gateway and Whatsapp integration for bookings details to be shared with sender and receiver. I need a password based login, multiple language support, PDF printable format trip details for carrier. Driver Module: Driver should have visibility to the only Trip he is assigned with. He should be able to update the corresponding status of the trip. Driver Specific login details, mostly all details frozen. Admin Module: The master of all the above. You should be knowing thi...

Project Title: STM32F0 IR Transmitter Project Description: We are seeking a skilled developer to implement the Phillips RECS80 protocol, as described in the SAA3008 datasheet, on an STM32F072 microcontroller device. The project will involve utilizing the Keil compiler with STM Low Level Drivers (LL) to develop firmware for the IR transmitter. Please note that the project should not use the HAL driver. Responsibilities: - Implement the Phillips RECS80 protocol on the STM32F072 microcontroller. - Develop firmware using the Keil compiler and STM Low Level Drivers (LL). - Utilize the IRTIM peripheral on the STM device, with TIM17 for the carrier frequency and TIM16 for data transmission. - Interface the IR LED through an MMBF170 N-Channel FET on the GPIOB9 pin. Requirements: -...

...Looking forward to your proposals. More details: Smart home. The smart home system has the following parts. Transmitter Several buttons are connected to the ports of an Arduino Pro Mini. When the respective button is pressed, and the gate goes low, a signal is sent to the receiver. The signal is sent with LoRa. (RFM95 433MHz) The transmitter is powered by 3 AAA batteries or an equivalent battery. The power circuit is replaced with a circuit that draws very little power. see this video Create a Gerber file for the PCB. Receiver The receiver is an ESP32 Node MCU with both WiFi and LoRa. for example Heltec WiFi LoRa 32(V3). The receiver has relays, dimmers for led lights, (possibly a camera) and a button to pair the device. Power from USB. Co...

I'm seeking a skilled developer to create a Bluetooth S-Bus PWM module that would enable control of an RC vehicle from an Android application using a long-range class 1 Bluetooth receiver or transceiver W/Wifi Possibly using a ESP32 devise/module Key Components: - Create a Bluetooth S-Bus PPM module - Enable control from an Android application - Use long-range class 1 Bluetooth Rx or Transceiver Primary Functions on App: - Control of the vehicle's throttle - Control of the vehicle's steering Skills & Experience: - Expertise in Android App Development - Proficiency with Bluetooth Connectivity - Background in RC Vehicle Control System Development Turnaround: The ideal candidate will be able to deliver a fully functioning module within a month. The propo...

I'm currently working on a robotics mechatronics project and need a PCB desi...currently working on a robotics mechatronics project and need a PCB designer specializing in KiCad software. You'll primarily be assisting me with: - Designing a PCB to provide a power supply for an existing general-purpose board based on the STM32H7 series. - Designing a PCB to read 4 AMS AS5047B rotary position sensors alongside 4 limit switches - Designing a PCB to control 4 BLDC motors with PWM Channel with Direction pins - Extracting an I2C port from the assembled PCB Your prior experience in these tasks would be a great advantage. A deep understanding of KiCad design software and STM32H7 series microcontrollers is a must for this project. Assist me in making my robotics mechatronics sys...

Craft an A4 sized glossy magazine for a special 50th birthday project, designed specifically with the receiver in mind. - Design Focus: The magazine is for a single reader, the person celebrating the birthday, and should be personalized to their tastes and interests. - Available Content: All content, including text and photos, is already available for you to utilize. Your role will be focused on the design and layout, bringing together the materials into a cohesive and engaging format. ( if available please provide historic project references ) - Theme: The overall feel of the magazine should be both personal and luxurious, akin to an exclusive glossy magazine ( JFK magazine, Bazaar, Vogue, Elle Decor.) High end luxury - Skills and Experience: Ideal freelancers should have experie...

For this project, I am seeking a highly skilled and experienced engineer familiar with programming PIC microcontrollers, specifically the PIC16F15323, in order to develop: 1- PWM functionalities. Key requirements: - The PIC16F15323 should have PWM output implementation on RC2 pin. - The desired frequency range of PWM output should be within the low frequency range, more specifically between 200Hz - 300Hz. - The duty cycle for the PWM output should be set to a constant and not require further adjustment after the initialization. 2 -HC-SR04 Ultrasonic Distance Sensor comunication every 1 second. Key requirements: - The PIC16F15323 should comunicate with HC-SR04 Ultrasonic Distance Sensor on RC5 (trigger)and RA4 (echo) pin to check the object distance every...

I'm seeking an experienced programmer to create a PWM program using PIC18F26K22 in MPLAB. The objective is to generate analog signals specifically sawtooth wave. Despite skipping the question on the preferred frequency range, an adept freelancer should deliver: - Sound understanding and working knowledge of PWM programming - Familiarity with MPLAB for PIC microcontrollers - Proficiency in generating different types of waveforms especially sawtooth wave Your strong background in microcontroller programming will greatly benefit this project. If you can provide any samples of previous similar work, it will add credibility to your bid. Looking forward to professionally executed work. Thank you.

...forespørgsel button, it should take you the the forespørsel formular section the page - then the send forespørgsel formular has to be updated so it is the same as it is on alba; se alba here: Note that: afdeling has to be just: Ikast. Remove københavn, odense, aalbor og hjorring. - Note:the forespørgsel formular has to go from a sender email and received on receiver email to be provided. vi) Kontakt os menu: -Kontakt os form is not working. Please test. I will provide send from email and receiving emails -add facebook and instagram -Add Fortrolighedserklæring link in kontakt os page (the present link is a link to alba-automotive page. Can you make this open a Fortrolighedserklæring page, where I will give you the text to the fortr...

I require a robust Arduino Uno DLMS (Device Language Message Specification) Client Library. It should be designed to foster simple yet efficient communication with Smart Meters. Key Features: - Exclusively supports wired connections, no wireless functionality needed. Supported communication protocols: - RS232 (Recommended Serial) - UART (Universal Asynchronous Receiver/Transmitter) Ideal Freelancer: The perfect freelancer for this job should have a strong background in Arduino and embedded systems. They should also have in-depth understanding and working experience with DLMS/COSEM metering systems and the mentioned protocols. Outstanding proficiency in Arduino programming is vital as effectiveness, efficiency and readability of code is key. Please note, the successful ...

Please Sign Up or Login to see details.

For my project, I seek a freelancer skilled in image processing, particularly in recognizing LED lights within an image. • Main Task: The primary job revolves around detecting objects in images. More specifically, these objects are LED lights, and they can often exhibit varying levels of brightness due to their pulse-width modulation (PWM) frequency. • PWM Frequency Range: Your role will require you to focus on medium range PWM frequency, that is, between 100Hz and 1KHz. This stipulation is crucial, and your ability to recognize these frequency patterns will inform the success of this role. • Expertise: Proficiency in computer vision libraries and algorithms along with an understanding of LED brightness will be ideal. Familiarity with complex image pr...

...camera, while utilizing the Arduino's built-in radio receiver to process PWM signals. Objectives: - Hardware Integration: -- Establish a seamless interface between the LattePanda's Windows environment, the Arduino co-processor, and the FLIR camera. -- Configure the Arduino's radio receiver to accurately decode PWM signals. - Software Development: -- Create a Windows application using the FLIR Atlas SDK (and in the future, the FLIR Science SDK) to issue commands to the FLIR camera (start/stop recording, potentially other functions). -- Develop logic within the application to translate received PWM signals from the Arduino into corresponding camera actions. - Data Handling: -- Implement streamlined data flow between the radio receiv...

I'm looking for an experienced electronics engineer to help me with a wireless transmitter. The device should have the following characteristics: - Primarily, it will be used for mobile devices, home appliances, and audio equipment. Therefore, some knowledge and experience in these areas will be required to ensure seamless integration. - The wireless transmitter should have a medium range capability. This means that it should be able to effectively transmit data signals to a distance of 100 to 500 meters. - Moreover, the wireless transmitter is expected to transmit data signals. Accordingly, having a solid foundation in data transmission and understanding the latest standards will be critical. An ideal candidate for this role should have a solid background i...

Scope of Work: 1. PCB layout design for the MagBrake system. 2. Firmware development and testing as per specifications with a sample controller. 3. Android and iOS app development for MagBrake management, including source codes. 4. Enclosure design assistance and file provision. 5. Comprehensive project documentation. 6. Source code delivery for future modifications. Payment Schedule: Post-completion. - Project Cost: - PCB & Case: - Firmware: - App Development: Deliverables: 1. PCB design files. 2. Documented firmware. 3. Android & iOS apps with documentation and source code. 4. Enclosure design files. 5. Project documentation. App Updates: 1. Quick Connect: Fix Bluetooth auto-connection for quick connect buttons. 2. UI Adjustments: Modify long press actions, set action ...

Title: Tracking Tec...Technology] RFID tags are shown being attached to the ears of cows. These tags contain unique identification numbers. As the cows move around the farm, RFID readers capture real-time data from the tags. The data is transmitted to the receiver, then to the cloud, and finally to the data management system. [Scene 2: Face Recognition Technology] Animated cameras are shown strategically placed around the cattle farm, equipped with face recognition technology. As a cow approaches the camera, its face is scanned and identified. A notification is sent to the receiver confirming the presence of the cow in the farm. If a cow is missing for more than 7 days, an alert is triggered, indicating a potential issue. you may have any quarry reg this project call us ...

Here's my need: I require an experienced C programmer, with microcontroller knowledge, to develop code for a robot that can: - Trace a sound and move in its direction. - Operate efficiently within a short detection range of up to 1-2 meter. Specifically I...efficiently within a short detection range of up to 1-2 meter. Specifically I am using the MSP432P401R microcontroller and ADALM2000. Expertise in the specific microcontroller is not that important. You should have experience with microcontroller in general, working with general-purpose input/outputs (GPIOs), analog-to-digital converters (ADCs), timers, periodic interrupts and Pulse-Width Modulation (PWM). Understanding of C programming and microcontroller robotics is essential. Only software help is needed. Hardware is...

This project purpose is to receive PWM signals from IA6B receiver, process them and control 5 output motors by these signals.

I am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay and through that relay ...

I am in need of a proficient hardware/software engineer to develop a logical transmitter system as per my specifications. The proposed transmitter should possess 4 inputs (2xPT100, 1x 0-5V, and 1x CAN) in addition to a 0-5V output. The transmission should be enabled via CANJ1939 communication. Project Requirements: - Proficient in C++ programming as it's our preferred language for this project. - Experience in both software and hardware development, specifically in creating circuits and programming logical operations. - The transmitter's primary function is to control a system. Hence, the professional should have practical experience in control systems design and implementation. - There are no size constraints for this device, giving the developer flexibility in t...

...connected via pwm - HB led, blink every second - receive con, on if signals being received from receiver input pins - drive active leds off when drive not receiving pwm signal and on when driving the motor. - drive con on driver pcb and main pcb on if and driver is receiving signals Channel 1 and 2 needs to have a roughly 2 second ramp up time. So if receiver sends a command for full --speed it takes 2 seconds to get there - Channel 1 and 2 needs to have a roughly 2 second ramp down, same as above just reversed. - rest of the channels are straight pass tru Please ensure: - You have prior experience with STM32F4 series, not just STM32 family. - You are willing to commit time and deliver results swiftly as the project needs immediate attention. - you have...

CubeSat satelite will be at least 550km above the earth. Elevation angle will be 20 degrees. LoRaWAN protocol will be used for the communication between sensor and CubeSat. Sensor could be any sensor like temperature and humidity sensor. Sensor transmitter power will be at least 23dBm. Tx uplink frequency will be from 148MHz to 150MHz (10 channels from 148.1MHz to 149.9Mhz with 200kz between channels, LoRa bandwidth 125KHz) RX downlink frequency will be from 137MHz to 138 Mhz ( total 3 channels, RX1 137.1MHz, RX2 137.3 MHz, beacon 137.1 MHz). LoRaWAN Protocol version will be 1.0.3. Sensor should support Clas A/B/C operations. Jobs that will be done: 1) Hardware Design of a LoRaWAN IoT sensor ( Schematic, Layout, PCB) for the given frequencies usin SX1276 chip 2) Custimization of LoR...

I need a comprehensive forensic report covering both mobile phone and computer communications. In my endeavor, I am naively striving to prove that I have never contacted a certain individual via calls, texts, or emails. Key Requirements: - Detailed examination of my devices (both mobile and computer) for traces of communication with the specified individual. - Extraction of Sender/Receiver details, notwithstanding any potential communication content. - Even though I am unsure about some specifics, I am keen on uncovering any contact information related to the person in question. Ideal Candidate: - Extensive experience in digital forensics, particularly in communications. - Proficient in data recovery and extraction from various devices. - Discreet, professional and thorough as ...