Design pcb layout transmitter jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    10,897 design pcb layout transmitter jobs found, pricing in USD

    I would like a PCB board(s) design so that I can complete this project. I have made an 8x8x8 LED RGB cube, I have a schematic which I have attached and was created using Eagle, however I am not fussed if you need to use a different program as long as I can send the files off to print the PCB. I will tell you this was not my plan and I got this idea

    $247 (Avg Bid)
    $247 Avg Bid
    19 bids

    We have a design that we want to redraw for Altium. It's a signal amplifier with resistors, capacitors and OAMP'S. The project is well documented, and detailed SCH will be distributed in PDF, BOM in EXCEL and Gerber for top and bottom as digital files. The attachment shows one drawing of 3.

    $335 (Avg Bid)
    $335 Avg Bid
    24 bids

    I need a PCB designed to operate this project: [login to view URL] A prototype loose-wired set-up is already working with an arduino mini, a stepper motor, a stepper driver and a real-time clock. Tasks include: 1. Design a PCB to match the functionality of the current set-up and deliver a

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    1 bids
    Trophy icon PCB drawing 4 days left

    I am going to make interface pcb for wifi chip, FCN9000SC-100. Please refer to 3 docs. 1. design guide of [login to view URL] 2. [login to view URL] 3. [login to view URL] Pcb should be full patterned by GND and connector J3 is female header put on the opposite side of wifiboard. and J4 is not a connector but TP. Please see pull up and down

    $50 (Avg Bid)
    $50
    0 entries
    PCB Layout 5 days left
    VERIFIED

    ...requires a PCB layout for Intrinsically Safe Apparatus using Altium Designer Software. Experience with layout of Intrinsically safe PCB’s is a bonus. Main requirements/details are as follows: PCB Layout Make part footprints if required Schematics will be provided Approx. 40 components Approx Dimensions of PCB: 25x52mm Double sided PCB ...

    $142 (Avg Bid)
    $142 Avg Bid
    21 bids

    BUDGET $40 USD, NO MORE... I'm looking for a person how know Eagle CadSoft, I need to wiring aprox. 200 lines in a PCB. That's all. The dimmension and the position of components is done, The project is 80% completed. I need it ASAP, 1 day.

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids
    PCB design 5 days left

    BUDGET $40 USD, NO MORE... I'm looking for a person how know Eagle CadSoft, I need to route aprox. 200 lines in a PCB. That's all. The dimmension and the position of components is done, The project is 80% completed. I need it ASAP, 1 day.

    $85 (Avg Bid)
    $85 Avg Bid
    5 bids

    We have ready the design of the keyboard but now we need someone who can create the PCB of the keyboard. We have some specifications like antigosting, key combinations, etc. We will give you all the specifications that we need.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    33 bids

    Need a device to communicate with Linux hand held device. Mode of communication is with Bluetooth. Need to send integer values. Required Keypad with custo...values through BT24LT but Garbage values are populating. 3) Required correct suggestion to complete my project. Skills Required: Arduino coding. knowledge on PLC and IC's PCB Designing.

    $8 (Avg Bid)
    $8 Avg Bid
    1 bids

    Need a device to communicate with Linux hand held device. Mode of communication is with Bluetooth. Need to send integer values. Required Keypad with custom...values through BT24LT but Garbage values are populating. 3) Required correct suggestion to complete my project. Skills Required: Arduino coding. knowledge on PLC and IC's PCB Designing.

    $19 (Avg Bid)
    $19 Avg Bid
    3 bids
    Inclinometer 5 days left

    GY-521 and ESP8266 based high precision inclinometer Using accelerometer data reporting via MQTT Local storage FIFO in MicroSD Battery powe...accelerometer data reporting via MQTT Local storage FIFO in MicroSD Battery powered - (very Low Power budget) Very low cost Looking for SW Development also OK to offer HW dev (PCB design etc..) as an option.

    $265 (Avg Bid)
    $265 Avg Bid
    12 bids

    ...solution including its case (the design of the case and the circuit should be available in 3D). c. To provide the full code needed to operate the controller. d. Estimated full package cost in mass production stage. e. Any element that is needed for the mass production by the factory should be provided. f. The package design should follow all the requirement

    $1557 (Avg Bid)
    $1557 Avg Bid
    14 bids
    3D design a case 5 days left

    I need a design for a PCB case, so can be send to manufacturer.

    $39 (Avg Bid)
    $39 Avg Bid
    27 bids
    PCB design 5 days left

    Training to Hardware's system and board design with real microcontroller based design.

    $25 / hr (Avg Bid)
    $25 / hr Avg Bid
    16 bids

    Hello, We need you to design a control circuit with RTC that can do the following: 1- Read a code that consists of (date, time and unique number) 2- The code sent from Mobile via Bluetooth. 3- The circuit will control a High Voltage Contactor ( On or Off ). 4- See the Attached photo for understanding. Conditions: 1- Minimum cost MUST be considered

    $33 / hr (Avg Bid)
    $33 / hr Avg Bid
    29 bids
    IoT hardware development 4 days left
    VERIFIED

    IoT hardware development (GPS 4G433mhz), if you have relevant experience, please contact us. Your mission: 1, PCB design 2,Device Configuration Utility 3,TCP protocol between hardware and server

    $1712 (Avg Bid)
    $1712 Avg Bid
    31 bids

    ...a commercial product by mean a Bluetooth (BT) communication. The ED shall connect by Wifi to SmartPhone (or PC) with dedicated APP and send the actual location of a GPS transmitter. The device should be also able to read and recognize the data from a 3 axis accelerometer and It should be powered with standard Alkaline batteries type AAA or similar.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    29 bids

    Dear all , Hope you are doing fine , i want to design high quality enclosure using solid work and it will be manufacture in shape way i attach stp file for pcb , the pcb thickness is 1.6mm , take care all

    $88 (Avg Bid)
    $88 Avg Bid
    50 bids

    I want to create a pcb that will act as cover for the following din rail box: [login to view URL] The pcb dimmensions(155.4 x 42) and mount holes will replace the DM9G-COVER and will fit into the D9MG body. On the pcb top there will be nothing mounted since I will apply a membrane keyboard on top of it. The membrane connectors should

    $616 (Avg Bid)
    $616 Avg Bid
    13 bids

    Hi Himanshu S., I noticed your profile and would like to offer you my project. We can discuss any details over chat. We need a pcb design with sca-100t-d01 and additional ls7366r counter. a optimized python code running on raspberry communicating with sca-100t and ls7366r and raspi publishing sensor data via mqtt periodically. python modul for ls7366r

    $248 (Avg Bid)
    $248 Avg Bid
    1 bids
    PCB board making 2 days left

    i have old PCB board, i would like to reproduce it.

    $1032 (Avg Bid)
    $1032 Avg Bid
    68 bids

    I want to create a pcb that will act as cover for the following din rail box: [login to view URL] The pcb dimmensions(155.4 x 42) and mount holes will replace the DM9G-COVER and will fit into the D9MG body. On the pcb top there will be nothing mounted since I will apply a membrane keyboard on top of it. The membrane connectors should

    $180 (Avg Bid)
    $180 Avg Bid
    8 bids

    Hi I need a arduino coder and schematics designer for a project. place you bids i will provide details in chat. thanks

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    50 bids

    hello, im looking for someone who is familiar with PATDMA (Modified SOTDMA) protocol, and can help me design a prototype using arduino.

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    ...in your application/proposal. Qualifications  3 to 5 years experience in Sales Electronics or mechanical background essential; Engineering degree highly valued; experience in PCB industry is an advantage. Application Questions 1. Why do you think you're a good fit for this job? 2. Tell us about a sales campaign you worked on, and how you made it succeed

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    1 bids

    We are looking for PCB and Schematic Diagram Designers adept at using Altium Designer. State in your proposal the complexity of the PCB designs that you have worked on, the applications that you have designed schematics for, as well as your hands-on experience in practising DFM / DFA. Begin your proposal with the words "Substrate" or " Track". You will

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    16 bids

    We need a PCB Board designed including schematics, gerber file and BOM to supply to a rapid prototype. The board is a SAS to SATA single backplane that is used to connect a hard drive to a sata cable that interacts through our software using an HBA card. Attached is an image of cards that I currently use. They are pretty simple as they are a

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    18 bids

    this is a project with a rapsberry, a small pcb board needs to get designed witch fits on the raspberry board. The board contains a hdmi switch (incoming hdmi cable trough pcb board to an outgoing hdmi with the possibility to switch the signal on and off with a gpio pin). further the needs to be a relay to switch a powersupply. Preferably designed in

    $31 (Avg Bid)
    $31 Avg Bid
    21 bids

    Quisiera el diseño para poder crear placa pcb para la conexión de 400 led y poder utilizarlo como si se utilizara una tira de led común utilizando estos led. [login to view URL] poder alimentar con 12v para poder gobernar lo con

    $78 (Avg Bid)
    $78 Avg Bid
    8 bids

    We are interested for electrical engineer for consulting and designing of PCB / BMS in a filed of Power banks and Chargers.

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    32 bids

    We are looking for a simple PCB design to send to a PCB manufacturer. Its just a simple connector board and I've listed the components needed as well as the power requirements. The PDF file should be 1:1 scale.

    $113 (Avg Bid)
    $113 Avg Bid
    11 bids

    we are currently looking for experienced electronics product design company to develop our custom iBeacon device. you will likely use currently available solutions on the market and turn them into our own branded device. device will be custom iBeacon with our own branding and requirements.

    $681 (Avg Bid)
    $681 Avg Bid
    17 bids

    ...electronic product - customer service - Basic knowledge in electronic - Linux - Raspberry pi - Retrogames. Basic knowledge of game consoles is enough - Optional: 3D modeling and PCB design skills. The task are mainly about community manager/customer service : A – Customer service: We use “Awesome Support” woocommerce-wordpress pluging. There the customer

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    22 bids

    ivery small job, just replacing a terminal connector from 6.5mm to 10.6 mm and send gerber files no new wiring or any other thing, shuld take few minuts work ... ( i dont have the software ) attach the opads file and the new terminal ( 5 poles terminal block)

    $27 (Avg Bid)
    $27 Avg Bid
    2 bids

    I have to design a new product which will scan HF RFID tags and send it to a local machine. I need somebody who can either suggest me the BOM and design PCB for me or who can manufacture complete product and give me 1000 pcs. Please have a look at the attached video to know what we need.

    $128 (Avg Bid)
    $128 Avg Bid
    21 bids

    Hi Chanchal K., I am going to hire you for the job "Split Camera, pcb design, assembly & progrmming" with attached descriptions. At this stage we start with the proposal for this project.

    $20 (Avg Bid)
    $20 Avg Bid
    1 bids

    I am looking for someone to assist in the design of a transmitter/receiver system for the sport of Fencing. (I believe it's crucial that the freelancer be someone who fences, or is very knowledgeable about fencing.) If you feel that this is a project you are capable of, and interested in, designing, let's discuss details. Currently, fencing is

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    10 bids

    I am looking for someone to assist in the design of a transmitter/receiver system for the sport of Fencing. (I believe it's crucial that the freelancer be someone who fences, or is very knowledgeable about fencing.) If you feel that this is a project you are capable of, and interested in, designing, let's discuss details. Currently, fencing is

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    5 bids

    Microcontroller based pcb programs, PCB Layout & Prototype development Work (we want only gujarat freelancer)

    $755 (Avg Bid)
    $755 Avg Bid
    13 bids

    I have received the components and the PCB. 1) I will assemble the different parts of the circuit and test their devices with very simple programs. Receive a serial port frames Send a serial port frames Receive a canbus frames Send a canbus frames 2) I assemble the LED circuit and test the LEDs with simple program for handle led drivers by SPI interfase

    $60 (Avg Bid)
    $60 Avg Bid
    1 bids

    I have all the pcb files layout ect I need to get a wall backup light manufactured

    $437 (Avg Bid)
    $437 Avg Bid
    16 bids

    This project objective is to design wearable personal safety / health monitoring devices to the smartphone via BLE connection. The purpose is is to track the SOS/sensor data from the wearable devices in mobile app. However, mobile app development is out of scope for this project. This involves design of PCB for 2 wearable devices. One for personal

    $1577 (Avg Bid)
    $1577 Avg Bid
    9 bids

    ...orcad which I don't have. I have a .pcb and a .DSN files (which version might not fit exactly btw). I can open these files in orcad viewer free software. On this files one component is a wifi antenna. I need to get this wifi antenna layout for eagle project. The plan is to extract the component from the orcad design files to a .olb orcad library, then

    $24 (Avg Bid)
    $24 Avg Bid
    12 bids

    Completed support to design and make a line following robot to work using 8 channel array Need; PCB design and software support for 8 channel array Support in hardware configuration Software support for arduino.

    $70 (Avg Bid)
    $70 Avg Bid
    1 bids

    ...through a 1 wire power line of 12 to 24 V( where peak voltage can reach upto 48V) . this power line is used to send the signal to the brake light . I want to install a transmitter in the trolley and a receiver in the truck head . The receiver should give the ID on a UART at 9600 Bauds . The product should draw power from the same line and transmit

    $497 (Avg Bid)
    $497 Avg Bid
    15 bids

    Needing help setting up an audio server to send audio over a network using Raspberry Pi, transmitter will use usb sound card mic line and looking to pull audio off of the network with other pi’s. Have 2 pi’s set up now with teamviewer and audio and speakers set up on my network. Will need to support 6 or more receivers on the same network. Units will

    $129 (Avg Bid)
    $129 Avg Bid
    2 bids

    I need someone to design and deliver a KiCad PCB with a few components: * NodeMCU * 3V Relay * 3 Resistors * 1 RGB LED * 5mw laser diode * Button From what I've been told it should be a small design, about the size of a credit card. I need to receive everything necessary to request a small run of PCBs for a first hardware prototype. If interested

    $154 (Avg Bid)
    $154 Avg Bid
    31 bids

    Hi, I have a schematic designed in LTSpice that I would like...I have a schematic designed in LTSpice that I would like created on a PCB. This isn't a very complicated circuit and would hope that it could fit on a board about 5cm x 5cm or 5cm x 7cm. The outcome of the project is the files I would need to provide someone to produce the PCB. Thanks.

    $29 (Avg Bid)
    $29 Avg Bid
    11 bids

    ...electrical engineer to design a custom PCB layout according to requirements, choose components and BOM. Also required to create very simple program for the board. This is for social impact startup product : [login to view URL] Low-cost assistive smart glass for hearing impaired Requirements: 1. Choose suitable components and design PCB with following

    $147 (Avg Bid)
    $147 Avg Bid
    15 bids

    ...help develop and transmit and receive portion of the project. New product to develop looking to expand market. We are building a detector and looking to integrate a transmitter and receiver. The detector would interact wirelessly with probes that would be part of the system. To start, we would like someone that would work on a transmit and receive

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    17 bids