Atmel 7272 smartcard jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    1,550 atmel 7272 smartcard jobs found, pricing in USD

    Hello, I look for a specific company that produced STM32F407 PCB with LAN and 485 ports about 2 years ago, the name of the persons were Ariel and Alan. If new candidates decided to participate, they have to prove that can develop complete embedded systems with STM32, Atmega, NXP, ESP32 as well PCB design, prototype and full production of assembled boards. I'll need the same team for forthcoming projects that I'll post here in Freelancer. The current requirement that will be used ONLY for proving skills: Short project for reading sms from SIM800L with ESP32 and search of a string with password inside the SMS. If password matches, ESP32 should send mail through wifi to given e-mail. C/assembler user for communication with GSM module, for e-mail can use Python. The work...

    $13 (Avg Bid)
    $13 Avg Bid
    9 bids

    Embedded c programmer required for programming MICROCHIP PIC and ATMEL AVR Microcontrollers. Mostly work required on ATMEGA328P and PIC16F877A Microcontrollers.

    $90 (Avg Bid)
    $90 Avg Bid
    21 bids

    I am in need of a firmware engineer with a strong skills in developing code for ATMEL SAMG processors. The focus of the project is to develop firmware that runs in our 5GV POD modules that interfaces with "plug in modules" that communicate with external sensors. We also require a firmware module that runs on the existing 5GV/Razor/Mini product and interfaces with the POD module(s). Key functions include: - Constructing firmware for the POD module to interface with plug-in modules that in turn, interface with external sensors like vibrating wire sensors, RS485 sensors, 4-20ma sensors, SDI-12 sensors, Pulse and Voltage Input sources. - Developing a module for the 5GV/Razor/Mini gateway/logger that drives one or more PODs. This includes configuration, interrogation and data ...

    $4646 (Avg Bid)
    Urgent NDA
    $4646 Avg Bid
    6 bids

    Need a PCB designed using the ATMEL SAM21D + SIM7020G and should have the proper resistance trace and connector for an external LTE antenna. It should use a usb connector to program the SAM21D in a similar way to the Arduino MKR Zero. The Atmel microcontroller will be connected to the SIM7020G in such a way to send data over LTE of course. Additionally, there should be 3 channels to measure voltage between 6-40v using the Atmel's onboard ADC. Cost of components should be a consideration. Designs should be submitted in Eaglecad format.

    $452 (Avg Bid)
    $452 Avg Bid
    30 bids

    I require assistance with programming and configuring an Atmel M90E36A. - Task: The primary service needed is writing a C++ code for the stated IC, which will allow for an auto calibration code from Microchip to be implemented. - Outcome: Ultimately, the implementation of this code should result in improved precision of readings. Ideal Skills and Experience: Proficiency in C++ is a must, along with prior experience in dealing with IC programming. Experience in working with Atmel M90E36A specifically, will be an added advantage. Knowledge on Microchip technology and calibration methods would be beneficial in achieving the desired outcome.

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    18 bids

    i make Zbr file from EasyEDA but not sure about the circuit connection and route. So need a Pro PCB designer for make my connection perfectly completed . Along with i have added a image of completed pcb. Having a knowledge about the electronics component ie ATMEL MICROCONTROLLER (ATMEGA8A) , CAPACITOR, RELAY, & USR-TCP232 . I require a designer experienced in single-sided PCB designs, accommodating for a larger size - Approcx 15*15 cm. Although the circuitry involved in this project is simple with limited components, attention to detail will be paramount to achieving the project objectives. The ideal candidate will have a proven track record in designing large, single-sided PCBs with simple circuits. Familiarity with standard industry tools such as Eagle or KiCAD would be ad...

    $15 (Avg Bid)
    $15 Avg Bid
    18 bids

    This project involves the design and implementation of a motion controller for a DC motor, incorporating precise speed control through Pulse Width Modulation (PWM) and real-time feedback using an encoder. The system utilizes an AVR microcontroller (ATMega328p) and involves programming in the C language within the ATMEL Studio 7.0 development environment. 1. **PWM Speed Control**: The heart of the system lies in its ability to regulate the speed of a DC motor through PWM. The PWM parameters can be configured and controlled, providing flexibility in adjusting the motor speed. 2. **Encoder Feedback**: To ensure accurate speed measurement, an encoder is integrated into the system. This feedback loop allows the controller to continuously monitor the motor speed 3. **USART Communicat...

    $333 (Avg Bid)
    $333 Avg Bid
    26 bids

    I am looking for a skilled C++ code programmer who can assist me in transferring data in real-time from an Atmel 860 microprocessor to a Windows laptop. The main goal of this project is to store the transferred data in a matrix format on the laptop. Skills and Experience: - Proficient in C++ programming language - Strong understanding of microprocessors, specifically Atmel 860 - Experience with real-time data transfer and storage - Familiarity with Windows operating system Key Requirements: 1. Data Transfer: Develop a robust and efficient code to transfer data from the Atmel 860 microprocessor to the Windows laptop in real-time, ensuring a fast transfer rate within milliseconds. 2. Data Storage: Implement a code that stores the transferred data in a matrix format on...

    $250 - $750
    Sealed
    $250 - $750
    35 bids

    Project Description: Student ID Card Design and Printing Requirements: - Design and print student ID cards - Incorporate specific features such as a photo and barcode - Utilize smartcard technology for advanced functionality Skills and Experience: - Graphic design expertise to create an attractive and professional ID card layout - Printing capabilities to produce high-quality ID cards - Knowledge of barcode generation and integration - Familiarity with smartcard technology and programming - Attention to detail to ensure accurate information and photo placement Quantity: - Printing of 1-50 student ID cards Note: Please provide a portfolio or samples of previous ID card designs and printing work.

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    25 bids

    I am looking for a freelancer who can help me with Mitsubishi PLC programming based on C firmware whihc is written for STM/ATMEL controller on our PCB MCU. The specific model of the PLC is FX Series. I need the plc software to be created from scratch based on C firmware written in IDE compiler The main goal of this project is to achieve process automation through the PLC program. The ideal freelancer should have experience in C programming and Mitsubishi PLC programming, specifically with the FX Series. Skills and experience required for this job: - Proficiency in C programming - Experience with Mitsubishi PLC programming, preferably with the FX Series - Strong understanding of process automation If you have the necessary skills and experience, please submit your proposal for th...

    $18 - $150
    Sealed
    $18 - $150
    4 bids

    The code must wait for new data, and if received must save it in a buffer (array of char) and respond with echo of same data as an acknowledgment. The code has to be fast enough to handle data and send back acknowledging echo at high rate (>10KHz)

    $33 (Avg Bid)
    $33 Avg Bid
    3 bids

    Project Title: SAMD (Atmel/Microchip) programming Description: I am looking for a freelancer who is skilled in programming the SAMD21 microcontroller, especially the SAMD21's internal configurations. I am a skilled C programmer with much experience with Atmel/Microchip microcontrollers, using ASF sometimes (when it's convenient) but also coding without ASF. However, sometimes I encounter problems getting the correct C code to configure some aspects of the SAMD microcontrollers. I am looking for expert help so I don't have to spend too much time working on unexpected SAMD configuration difficulties. Specific freelancer requirements: - Very experienced in programming the SAMD21 microcontroller - Proficient in programming languages C Timeline: - The project t...

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    28 bids

    I'm looking for a freelance prog... but not be able to be extracted or read back by determined people - i.e. fuses and other security features on the ATSAMD51 will need to be employed. I do not want people to extract the program or code and then be able to upload it onto copied devices. I do not require write protect, only read protect. I have ATMEL Studio (on a PC) and a Segger J-Link Mini. I am happy to purchase additional software or equipment as needed. In the past, I put a Bootloader on the chip with ATMEL Studio and the J-Link; but, then used the Arduino IDE to upload the programmer via a USB. I would like the process to be on a word doc, be very clear, step by step and preferably have photos as part of the explanations. The successful applicant may have lots...

    $284 (Avg Bid)
    $284 Avg Bid
    16 bids

    ...interfaced to an ATTiny84A. Only 6 positions are to be used, and the position will be queued up with a single push button. The purpose of the dial is to provide input selection, to the ATTiny84A and will turn on power to either 1 or 2, of 3 PORTB pins. This will also require adjustment of PWM on several pins that I will need to adjust several times through the project. I would prefer this be done in Atmel studios as that is what I use, but any format in which I can adjust the duty cycle would be sufficient. This will most likely require software PWM on PB0 due to the use of PB0 through PB2. All the electronics for this project are in breadboard testing and can easily be changed if necessary. I have started writing AVR C code for this. However I am not nearly as proficient in AV...

    $398 (Avg Bid)
    NDA
    $398 Avg Bid
    17 bids

    I am looking for a skilled freelancer who can design a BLDC ESC PCB and develop the necessary software. The project requirements are as follows: Voltage Range: - The required voltage rang...follows: Voltage Range: - The required voltage range for the ESC is 3S to 6S. Microcontroller Preference: - I have no preference for the microcontroller to be used in the ESC. Intended Application: - The ESC will be used for an RC model. Skills and Experience: - Experience in designing BLDC ESC PCBs. - Proficiency in developing software for ESCs. - Knowledge of microcontrollers, preferably Atmel or Texas Instruments. - Familiarity with RC models and their specific requirements. If you have the necessary skills and experience, and are interested in working on this project, please submit your...

    $533 (Avg Bid)
    $533 Avg Bid
    13 bids

    ...wheelchair should be able to operate using a programmable control system controlled by joystick - This will allow for customization and fine-tuning of the wheelchair's performance. - it should be close loop system sensing the back EMF to manipulate the speed verse the torque and also sensing the maximum current to do chopping PWM as necessary 2- CONTROLER AND FEATURES : - USING STM or ATMEL controller - the mechanical body of the wheelchair already made and wghit almost 55kg . - it consist of tow battery each 12 volt connected in series. - dual dc motor each 24 volt with maximum current of 7A - THE SPEED OF THE MOTOR IS 3000 rpm and has a gear ratio of 1:10 - each dc motor contain electrical brake system . 3. Reverse Mode - The wheelchair should ...

    $446 (Avg Bid)
    $446 Avg Bid
    30 bids

    I am looking for a programmer with experience in smartcard programming to develop a smartcard that just returns a specific ATR. The chip technology and the programming language has to be discussed. This is just a starting point for further project with more complex features - see it as a POC. Please include some time for consulting, to discuss the best smartcard technology to use and to setup the development environment also on my computer.

    $840 (Avg Bid)
    $840 Avg Bid
    21 bids

    I have all the code, but it’s not working the rfid.. and I don’t know why, the language is c and i work in atmel studio.

    $11 (Avg Bid)
    $11 Avg Bid
    14 bids

    Request details I have a C program in Atmel Studio 7 which currently uses a ATSAMS70 to control a radar SOC. The program was originally provided by the radar SOC manufacturer and runs on a development board created by the radar SOC manufacturer. I need help getting the code to run on a new board, still using an ATSAMS70, that has a few changes including removing the external RAM.

    $96 (Avg Bid)
    $96 Avg Bid
    12 bids

    write source or help trouble shoot using debugging tools our existing code. C (Arduino IDE) but prefer to use Atmel Studio Using ATmega328 or ATMega168P QFP CPU Monitor 5 I/O pins - to determine if a switch contact is open or closed Closed is Good, open is alarm condition Also use A/D to drive an LM84T temperature sensor and measure once per minute Alarm condition if temperature is over 75C once per 5 minutes - use serial lines to operate and send a message using HopeRF RFM95 LORA radio module. (this is a 'status ok' message) We have library for this radio module When alarm conditions occur (contact open or temperature >75C) alarm message sent. Message payload is 6bits - we have this defined. Device sends messages only 1650mAH battery - target 5 years life We have this...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    22 bids

    ...product ideas, and designing mockups of proposed products. Develop and complete projects Sourcing of raw materials. Purchase electronics device and equipments depending upon project needs Troubleshooting embedded systems and diagnosing errors, malfunctions, or inefficiencies firmware drivers for hardware peripheral ICs. Analog, Digital, mixed signal, wireless & rf electronics design. Microcontroller (Atmel, ST, Renesas, Microchip, ARM etc.) based system design,development, and testing, Embedded C/C++ Programming. Implementing effective repairs, modifications, and upgrades to the embedded systems Schematic creation according to hardware design and PCB layout design with implementation using CAD tool (Altium) GSM Module, GPS Module, Wi-fi Module, Ethernet transceiver, SD Card i...

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    27 bids

    Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.

    $149 (Avg Bid)
    $149 Avg Bid
    42 bids

    I want to generate an I2C slave with a SAMD21. This should have write and readable registers. Unfortunately I can't get this to work. I was guided by the following code: From page 39: The final application “High speed Configuration” in main.c file will be as below for SLAVE. The aim is to provide 256 registers (1 byte in size) with the SAMD21 (as Slave). The I2C master can write and read these registers. Your task is to create this functionality based on the provided example. Only the function "void SERCOM2_Handler(void)" may be adjusted. The I2C master works in FAST_MODE_PLUS. Therefore, the rest of the configuration must remain exactly the same.

    $707 (Avg Bid)
    $707 Avg Bid
    9 bids

    Hi Sardar I need you to write a research report on Atmel comparison with PIC chip. I need 20 pages report with references and tables.

    $700 (Avg Bid)
    $700 Avg Bid
    1 bids

    Project Description: I am looking for experts who has experience in 1) ST20 (Sti55xx) cpu. 2) Experience in DVB encryption system. expecially, ecm, emm and data exchange (smartcard and STB) in smart card processing I will provide: 1) firmware jtaged from STB (both data in the Flash and RAM). 2) The function/sub-routine that I am looking for to decrypt those data in the firmware The developer needs to: 1) decompile the function/sub-routine that I am looking for into linux c code (example: function.c) 2) provide any additional decompiled function/sub-routine that can be useful for me. we can have detailed interactive discussion over any app if you need to.

    $681 (Avg Bid)
    $681 Avg Bid
    8 bids

    Due to the many who have provided boiler-plate answers and interest, if you DO NOT have experience in specific coding / communications with smart card readers, authentication with PIN, handling certificates on a card and pulling name/contact/info from it, do not even bother posting. Now on to the details. I need some assistance working on writing a smartcard library, in C# / Xamarin going against an Android device with attached smartcard reader. This would be more of an HOURLY project where I can utilize your knowledge and talents to figure out what I am missing. At present, I can connect to the card, read ATR, can select CCC file and endpoint applications. I can even read the certificate content from the card in raw byte format. I am missing what appears to be basic ...

    $35 / hr (Avg Bid)
    $35 / hr Avg Bid
    20 bids

    Miniature battery operated circuit with a few I/Os driving a solenoid. Expertise with a Nordic, Atmel or similar Wireless Microchip is a plus. Located Tulsa, Oklahoma, USA

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    25 bids

    We require a embedded software developer to examine the program and change it according to the new PCB also require you to write libraries and working code without altering the other functions. The component in question that has been replaced is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a mutually agreeable figure.

    $341 (Avg Bid)
    $341 Avg Bid
    23 bids

    We have a display currently using an Atmel Mega 8 processor with RS-232 input. It now needs Ethernet input and program upgrading via the Ethernet

    $1125 (Avg Bid)
    NDA
    $1125 Avg Bid
    11 bids

    basic servo control (i.e. group actions) with ps2 controller and bluetooth android user interface. hardware is assembled, servos connected. powered with serial and bluetooth connections available.

    $46 (Avg Bid)
    $46 Avg Bid
    8 bids

    ...replace an outdated component with a new one and arrange the components in a different layout on to the PCB We also require you to write libraries and working code without altering the other functions. The component in question is a capacitive sensor IC used for touch buttons. Please bid only if you have good knowledge and experience working with CAD (any electronic cad will work),Atmel studio, Arduino IDE ,Atmel and Arduino libraries ,ESP and atmega controllers , capacitive proximity sensing ICs. We need you to coordinate with backend web application developers and mobile application developers to test the functionality We have multiple development projects upcoming and you could be our preferred freelance team member. We could Discuss on the Pricing and come up with a...

    $155 (Avg Bid)
    $155 Avg Bid
    20 bids

    To work on legacy programs - debug and later re-wrie Preferably Southern England

    $36 / hr (Avg Bid)
    $36 / hr Avg Bid
    18 bids

    I am new to Atmel Studio and having lots of trouble when building a project that I inherited. I need interactive help on Zoom.

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    27 bids

    I need a curl windows64 version with pkcs#11 capability to manage access with smartcard with the syntax --cert "pkcs11:object=%CERTIFICATE%:%PIN% --key "pkcs11:%PRIVKEY%" --data-binary @%datafile% %ENDPOINT% Here is a reference

    $535 (Avg Bid)
    $535 Avg Bid
    12 bids

    Convert assembly code to C for ATMEL ATSAM4SD16CA-AU

    $527 (Avg Bid)
    $527 Avg Bid
    33 bids

    I want to analyze the code . There is a part I want to detect.

    $848 (Avg Bid)
    $848 Avg Bid
    10 bids

    We have a pcb deisng with firmware that works quite well, we would like to add a couple of features (additional input contact and ntc reading) and so a redesign and a firmware change is required. We need a development company with a lot of experience with pcb design and atmel platform. No prototype needed, we will take care of that. Please begin you bid with atmel, to be sure you read the above. Otherwise your bid will not be considered. Many thanks

    $24 / hr (Avg Bid)
    Featured
    $24 / hr Avg Bid
    18 bids

    I am looking for a professional Atmel firmware engineer with experience in Zigbee protocol. Our custom board is designed to send data over Zigbee. The other parts are working great. We just have an issue in Zigbee communication. It is mainly related with the Zigbee message packet. I can provide with the existing Atmel source code. The task is to review the existing project and resolve the Zigbee communication issue. Only apply if you have experience with Zigbee. To prove that you are serious, please start your proposal with a word "zigbee".

    $159 (Avg Bid)
    $159 Avg Bid
    11 bids

    Solve the null reference issues in the source code. Below is the attached file for the exact issue. We have been building on the Javacard platform since the past 3 years. Keywords - jcop3, nxp, smartcard, javacard

    $200 (Avg Bid)
    $200 Avg Bid
    4 bids

    We are looking for electrical and electronics engineers with good experience in following areas: • Embedded C Programming. • VHDL/Verilog, LabVIEW/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Feel free to place your bid and mention your areas of expertise in your proposal. we highly encourage new freelancers to apply for this post.

    $166 (Avg Bid)
    $166 Avg Bid
    22 bids

    The project is to add the circuit into existing PCB. The circuit is offered. The designer will update the schematic and PCB. And if you know about firmware development for ATXMEGA128AiU and Atmel studio 7, it is preferred.

    $150 (Avg Bid)
    $150 Avg Bid
    50 bids

    We would like to have developer, who can develop atmel or arduino devices which have 6 I/O and data output need in CSV format. Which can be communicate thre BT or Wifi to server or app.

    $348 (Avg Bid)
    $348 Avg Bid
    15 bids

    The project is about programming an operational flow in an ATmega128 Atmel Micro-Controller. Application is controlled via a Nextion Touch Display. As per input on display, complete operation is to be executed to turn ON/OFF the peripherals. Number of Peripherals to be controlled: Digital Output: 17 (ON/OFF or HIGH/LOW) Digital Input: 07 (HIGH/LOW) Analog Input: 04 Nextion Touch Display GUI & Atmel128 Arduino IDE code is implemented. Freelancer just need to implement process level flow program. Request to freelancer to ask for more operation level details if interested.

    $117 (Avg Bid)
    $117 Avg Bid
    17 bids