3d model cylinder motor jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    9,605 3d model cylinder motor jobs found, pricing in USD
    vending machine using Arduino 6 days left
    VERIFIED

    Design and develop vending machine communication and control platform using Arduino, 21rpm high torque vending machine 12v dc gear motor (40 motors), REES52 IR Infrared Sensor Module, wifi Module. Also need continuous support during the testing of the functionality on the actual vending machine.

    $754 (Avg Bid)
    $754 Avg Bid
    9 bids

    ...design of a cylinder. We want to create a watertight layer at the middle of the cylinder with an exit for water on the side. Please see concept images below, note that the middle layer is inclined to ensure that all the water flows to the small pipe section. We need to mantain the overall dimensions and the lip at the bottom of the cylinder on the original

    $36 (Avg Bid)
    $36 Avg Bid
    14 bids

    lane keeping control using matlab image processing toolbox with simple PID, PI or PD controller in aduino and adafruit motor shield. Just as in the video I want to be able to control using arduino. please check this link for better understanding [login to view URL]

    $103 (Avg Bid)
    $103 Avg Bid
    6 bids

    Need help getting my stepper motor to change directions smoothly.

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    2 bids
    Trophy icon REDESIGN BUSINESS CARDS 6 days left

    I have business cards that need to have a new service added. We now tune motorbikes. So I will need the card resigned to show a motor bike (2019 BMW S1000RR) on the back as well as a sports car. Most of the design work is done already See attached. Please advise if the bike pic is good enough image or not I will give more info on moving

    $108 (Avg Bid)
    Guaranteed
    $108
    97 entries

    ...intervalometer/timer 2. shoot-move-shoot slider stepper motor controller. I would like to combine these two sketches into a single program. The hardware that i am using: 1. arduino mega2560 (with possibility to change later to teensy or similar, smaller board) 2. pololu DRV8825 stepper motor controller 3. nema 17 bipolar stepper (single axis for the

    $268 (Avg Bid)
    $268 Avg Bid
    5 bids
    Motor animation 5 days left

    hi, freelancers! file of PCB board. -max duration : 8~12s, So that the viewer cannot see every detail. -Animation

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    26 bids
    Trophy icon MXcavation 3 days left

    ...excavation business in start up and looking for a fun logo to use for promotional materials eg - business card, work shirts, sign on truck etc. Mick (business owner) used to race motor cross and wants the colours to be Kawasaki green, blacks, greys and white. We also live near a prominent mountain called "Walsh's Pyramid" which we would like to have in the

    $72 (Avg Bid)
    Guaranteed
    $72
    65 entries
    Ahu assembly 4 days left

    Ahu motor to be replace with a new one

    $18 (Avg Bid)
    $18 Avg Bid
    2 bids

    AC Motor Speed controller- Hyderabad India

    $227 (Avg Bid)
    $227 Avg Bid
    8 bids
    PID Arduino Valve1 4 days left
    VERIFIED

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [login to view URL]

    $142 (Avg Bid)
    $142 Avg Bid
    17 bids

    ...remote triggering to be used with batteries. I want a design for a PCD board that can run a motor/solenoid when a RF remote button is pushed. The RF remote must have two buttons, one that arms/disarm the device, and a second that triggers the motor/solenoid. The motor/solenoid must not trigger if the 1st button that arms it haven’t been pushed. The circuit

    $296 (Avg Bid)
    $296 Avg Bid
    17 bids

    Obstacle avoiding robot using pic (pic 16 f887) microcontroller. Sensor using in this project- 1. Fron...avoiding robot using pic (pic 16 f887) microcontroller. Sensor using in this project- 1. Front sensor - Max Sonar ultrasonic sensor 2. Left-right sensor- Infrared sensors Motor driver module=L298N dual H bridge Software for code righting - MP Lab

    $108 (Avg Bid)
    $108 Avg Bid
    17 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $452 (Avg Bid)
    $452 Avg Bid
    31 bids

    Hello. We are using a board that integrates arduino, raspberry pi, motor drivers and some dc buck converters and we are having some issues. We need to move components apart from each other a little bit. We also need to make the board a little bigger, add some drill holes, do some corrections on the silk screen text and most importantly, our last board

    $332 (Avg Bid)
    $332 Avg Bid
    10 bids

    I need someone to design a controller of a brushless motor for me. It's a AC brushless / slotless motor. Power rating in the 60W, 200mA, 24V ranges, up to 40,000 rpm. The functionality of the controller includes speed control, gear switch, memory of the current status of the motor, combination of the different keys, LED display, etc.,

    $3227 (Avg Bid)
    $3227 Avg Bid
    19 bids

    I have a 30 year old wiring diagram for a 12 volt gate operator that I would like to have updated using modern electronics also consultation/input a...old drawing consists of an open contactor, close contactor, safety relay, hold open relay, run timer, timer to close and a terminal strip for connection to limit switches, motor, buttons to operate etc.

    $635 (Avg Bid)
    NDA
    $635 Avg Bid
    13 bids

    Design a BLDC motor controller 500W using any atmega series and code using avr studios.

    $143 (Avg Bid)
    $143 Avg Bid
    10 bids

    This project is to write code to create a mechanical compass using a stepper motor to interact with data coming from a flight simulator software. Hardware to be used is ardunio nano, 28BYJ-28 stepper motor with driver. Output from x-plane is a float value ranging from 0 - 360. Software must allow a smooth cross from 0 to 360 and 360 to 0. I am happy

    $74 (Avg Bid)
    $74 Avg Bid
    10 bids

    Hello, I would like to hire a software developer for this project. I wan to use the Raspberry pi 3 to run the code with 8 channel relays to control the motor for automation at home. I will discuss the project in more details, but for now, the person that I hire MUST have the following experiences. Java Python Work with 8 channel relays before with

    $216 (Avg Bid)
    $216 Avg Bid
    22 bids

    I need to make a simple electronic model which consist of motor, temperature sensor, etc. I want to control the components by using touch screen display. need someone who can design PCB and firmware.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    18 bids
    Trophy icon Label Designer Wanted 2 days left

    ...called J. C. Vapour and we specialise in flavoured vapour juice. We are after a designer with real artistic vision, for now we are after designs for 4 things: logo, cardboard cylinder packaging box label, bottle label and a business card size promotion card with a white space where we can write discount promotion codes. We are not looking for the average

    $86 (Avg Bid)
    Guaranteed
    $86
    62 entries

    ...1x is plain electric DC motor. I want to replace the original controller with a raspberry pi so it is an integrated unit with better open source capability and is then easily accessible to files via wifi on the network. Attached are the photos of the machine and some specs below. Step motors: 2ph 3a amp 1.57Nm Driver model number: ADtech Q2BYG404MA

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    7 bids

    ...or 1:100 [wide range] Output can be straight or 90 deg Input torque: 10 Nm Motor Specs: 2kW motor (to find out more) KPI: Tech requirements for the CVT derived from mission profile and system specs. Mission Profile characterizing the load of an electric motor. Basically a torque and rpm graph over time. System is defined by student for small

    $359 (Avg Bid)
    $359 Avg Bid
    11 bids

    I have a 7inch Nextion display have a look screen in the Attachments. The project needs Motor RPM control and Temperature control with the relay. Only Nextion and experience guys required.

    $194 (Avg Bid)
    $194 Avg Bid
    20 bids

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [login to view URL]

    $288 (Avg Bid)
    $288 Avg Bid
    9 bids

    I need to control stepper motor with arduino uno. I want to control 2 motors at the same time. firstly i want to rotate first motor only 30 degrees with acceleration (for example. kind of 0->1 -> 2> 3> 4>- ~~~ >100, and it should take 1second reaching from start to the end. and them should rotate back from the end to the start point with deceleration

    $140 (Avg Bid)
    $140 Avg Bid
    4 bids

    I need a velocio programmer to program my machines run function for an industrial saw. Using an Ace 1430 with a HMI from Velocio. I can provide a list of components, video of machine used and any other relevant information. I would like to control 3 axis of motion with Velocio HM-043AE - 4.3" Command HMI controlling speed and distance travelled in Feet per minute and inches per axis. Also...

    $151 (Avg Bid)
    $151 Avg Bid
    4 bids

    I have some problems regarding dc motor control. Please experienced bidders will be entertained only.

    $39 (Avg Bid)
    $39 Avg Bid
    11 bids

    Logo para canal de YouTube Motor. Necesito un logo para canal de YouTube dedicado a pruebas de coches y motos y cuyo nombre es “RuedasTube”.

    $20 (Avg Bid)
    $20
    14 entries

    ...promotions and selected categories, e.g. the following parts for European trucks: -Truck trailer hitches -lashing straps -Truck compressed air tanks -Truck brake pads -Truck brake cylinder -Truck shock absorber -Truck air springs -Truck wheel + tire accessories -Truck electrics So the designer should have some experience in the field or at least know exactly

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    8 bids

    ...the purchasing. Mean, I am going to provide delivery for all the things which selling on my application no matter it is food , grocery , or something else. I will provide motor delivery at the first . before i proceed to deliver the item , buyer have to pay first and then seller will place a time for the things and and application will inform both

    $805 (Avg Bid)
    $805 Avg Bid
    77 bids

    I need to model an off-grid power under steady state and transient conditions (such as a direct online induction motor starting up) system using MATLAB simulink - If you have any experience in this kindly bid.

    $98 (Avg Bid)
    $98 Avg Bid
    21 bids

    I need a single color design to be used for car club T-shirt’s incorporating an existing logo. Simple modern look. It is for a Ford Mustang club and Ford Motor Company has approved our logo. Two versions of our logo are attached for use. Doesn’t matter if the stripe or no stripe is used. Designers choice. The other 2 attachments are designs of other

    $10 (Avg Bid)
    $10
    5 entries

    electrical mechanica...picture of trykes,- these are 3 wheelers,-- 4 batteries making 48 volt,- all i can asses is the fault seems to be either a lose wire, connection,- or a new 500 watt brush motor controler is required,-- i have 2 new ones that may not be the correct ones,-- the trykes are sturdy chinese made, and widely used in bulgaria, turkey.

    $188 (Avg Bid)
    $188 Avg Bid
    9 bids

    Motor controller that communicates via Modbus over RS232. We want to make a simple battery meter by getting the values of state of charge on the motor controller. This is to be graphically represented as a battery meter energy on the OLED display. You will need to use MODBUS related libraries for Arduino and the Adafruit OLED display driver / libary

    $133 (Avg Bid)
    $133 Avg Bid
    16 bids

    ...provide solution and fix this issue asap. 1)Using nodemcu 2relay LM2596(step down 36v(battery) to 5v,powering nodemcu and relay from 36v battery ) to control battery power to motor on/off. 2)this code calls API every 10 seconds,connects to wifi hotspot and do not know it heats up and does not work anymore ,need to fix this issue and make it run 24x7 ,365

    $27 (Avg Bid)
    $27 Avg Bid
    6 bids

    ...requirements 1. Time delayed relay circuit 2. Preferably operated with 9V 3. Should activate for approximately 5 seconds after every 12 hours 4. End actuator is a 9V operated dc motor (This is just for information not to be considered in scope) 5. Compact as possible (Preferably within a boundary of 50x50x30mm) 6. Should be very econimical built with basic

    $22 (Avg Bid)
    $22 Avg Bid
    13 bids

    ...blows air). An atomizer (a rotating disc that throws water into the main fan’s air stream). A water pump (which pumps water from a water tank onto the atomizer). A rotational motor (which swings the fan head left/right) The machine operates in the following way: Water from the main tank is pumped and thrown onto a rotating disc called an atomizer. The

    $732 (Avg Bid)
    $732 Avg Bid
    25 bids

    I need to control two step motor with arduino uno. one motor should turn 30 degree and when meeting limit censor, should stop and after 2 second, move back to origin. and another motor turn 45 degree at the same time and when meeting the another motor's limit switch, It should move back to origin. so when the machine boot up at the first, two motors

    $134 (Avg Bid)
    $134 Avg Bid
    40 bids

    ...provide solution and fix this issue asap. 1)Using nodemcu 2relay LM2596(step down 36v(battery) to 5v,powering nodemcu and relay from 36v battery ) to control battery power to motor on/off. 2)this code calls API every 10 seconds,connects to wifi hotspot and do not know it heats up and does not work anymore ,need to fix this issue and make it run 24x7

    $30 (Avg Bid)
    $30 Avg Bid
    6 bids

    ...to modify this code so i can control each motor separately. Motor1 has to go forward when (w) is pressed, and go backwards when (s) is pressed. Motor 2 turns left when (A) is pressed, and turn right when (D) is pressed. Motor 1 needs to reach its potential as it will be responsible for moving the car. Motor 2 has to be moved really slow as it will be

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    1 bids

    ...-Control DC Motor speed *Communication -Arduino is to connect via usb or better recommended means - Tablet Web based UI is to submit values received from Arduino thus from its sensors to Sql Database in realtime and also an SD Card for backup -Arduino to execute Tablet UI commands to each individual sensors such as; *Calibrate Scale* Change DC Motor Speed*

    $612 (Avg Bid)
    $612 Avg Bid
    29 bids

    This is the script where the focus should be on: Automotive engineers placed a transparent plexiglass valve cover on the motor and measured how long it took for the right amount of oil to get from the oil pan to the cylinders after the start of the engine. When medium quality oils were used, the elapsed time was about 10-17 seconds. Basically, I need

    $180 (Avg Bid)
    $180 Avg Bid
    1 bids
    Trophy icon design a logo Ended

    i have a new company called Norwich Motor Company LTD could use NMC as logo, see attached logo i like something similar also, letterhead and business card incorporated in the design

    $100 (Avg Bid)
    Guaranteed
    $100
    472 entries

    ...Gamepad driver should work. I should be able to control minimum of 2 Axis, 8 Buttons and 2 motors (for steering). Force feedback signals have to be used for PWM control of a DC motor. Directinput and USB HID protocol should be used. I will need all files to program and modify any number of arduinos. Original source of all files. Arduino Leo will be preferred

    $995 (Avg Bid)
    $995 Avg Bid
    10 bids

    I want an electric motor with my specifications along with design

    $390 (Avg Bid)
    $390 Avg Bid
    14 bids

    This is the script where the focus should be on: Automotive engineers placed a transparent plexiglass valve cover on the motor and measured how long it took for the right amount of oil to get from the oil pan to the cylinders after the start of the engine. When medium quality oils were used, the elapsed time was about 10-17 seconds. Basically, I need

    $393 (Avg Bid)
    $393 Avg Bid
    12 bids